Motorola Droid Pro :: Plus Has Failed Digitizer?
May 29, 2012
I have owned a Droid Pro Plus (Pro+ 4G) from Bell Canada from launch last November.After just 6 months of use, the screen started to go haywire. Sometimes it doesn't get my touch inputs, other times it goes into "automatic mode" with continuous random inputs until I turn off the screen.According to a phone shop person I interviewed, this has to do with the touchscreen's digitizer. Do you have any comment on that?This phone has always been handled with care - never dropped, never wet, absolutely spotless - and thus how this could fail on me after just 6 months of use is beyond belief. I am currently on travel in the USA, and wonder if the guarantee is international???
View 1 Replies
ADVERTISEMENT
Apr 11, 2012
so my LCD broke, gorilla glass is intact, but the digitizer is not functioning, so I can't see, or touch. I'm looking to see if I can salvage any data off the phone,I understand call logs, apps and texts will most likely be lost, but things that were saved to internal storage, is there a way big red can hook it up to my insurance replacement and transfer info over? or even drag everything off with my computer?
View 7 Replies
View Related
Oct 17, 2011
Im trying to create and application on for my Droid 3 but when i connect the phone to my computer it starts to install the driver but then says driver installation failed.Also, when i turn on debugging for my Droid it doesnt show up on my phone. Im sure this is because of the failed installation.
View 1 Replies
View Related
Sep 6, 2011
I downloaded the update, and it began installing. But halfway through, a caution sign appeared and it stopped. Then my phone rebooted and it said software update failed.
View 4 Replies
View Related
Apr 18, 2012
I have a droid2, bought used but stock to my knowledge. Has received many OTA updates previously no issues. Accepted an OTA update this morning (verizon, not sure what code it was, I didn't look closely enough). Update failed and phone now only boots to bootloader. I have tried the power up while holding X key, and that gets me to triangle and droid guy, but from the search key does nothing, I cannot get the menu up to reset the phone.
View 7 Replies
View Related
Dec 15, 2011
Since my successful pushed software update, My Bionic has tried to download some update (that I have no idea what it is, I can't see it), the download failed two times. Now I am getting an Authentication Error from My E-Mail Provider.
View 4 Replies
View Related
Nov 15, 2012
The wife and I both have Razrs. For some reason, I got the notification to update to ICS, she never did. So, when you go to system updates, you can download ICS, but when you procede to update, it gives the attached message.
View 3 Replies
View Related
Oct 17, 2011
While I am able to send and receive text messages at the moment, recently, I found where 6 text messages never got sent. I deleted them. However, I still show a text message icon with a red circle/slash through it indicatint the messages never got sent. Since they were deleted, how can I get rid of the failed messages icon in the status bar? I clear the bar, but the icon eventually returns. Don't know why it happened or how; but thought deleting the messages would delete the icon. Not even sure how I'm now ok sending and receiving messages!
View 7 Replies
View Related
Sep 25, 2011
I just did another factory reset after the latest update. What do ya know, I'm now having a problem adding my Verizon email account. I tried to add it and after I enter the email and password I'm get a login failed notice. I've tried it a bunch of times and I cant get it to add.
View 1 Replies
View Related
Jan 10, 2012
Selecting "Motocast Computers" in the Files Application the computer shows that it is online. When selecting my specific computer it returns a "Failed to load content.Please try again." message. This used to work and show folders and files. My WiFi and data connection is working but cannot resolve this.
View 2 Replies
View Related
Aug 16, 2011
I rebooted my phone then downloaded and installed the 4.5.602 update. Took less than 10 minutes to install then when the X started back up it displayed an "Update Failed" message on the slide to unlock screen. Going to Settings > About phone does show a system version of 4.5.602.
View 15 Replies
View Related
Mar 4, 2010
I'd like some help with this: I had a faulty digitizer (touch screen), so I bought a new one. I installed it, but it doesn't work. It's like the contacts weren't there. Does anyone knows if there's something I have to do after replacing the digitizer?
View 1 Replies
View Related
May 7, 2010
i have a samsung moment that the digitizer screen is cracked. can anyone point me to some kind of repair documentation or a video?i have searched fix ya, Internet, etc.
just wondering if i could see how to take it apart first instead of guessing and breaking things like tabs on it.
View 3 Replies
View Related
Jan 12, 2010
my son cracked the digitizer screen, Prices on e-bay are all over the place.The digitizer on the G1 is the same as the htc touch? anyone know?
View 4 Replies
View Related
Apr 10, 2010
Got my new 9550 couple of days back. First day to work, it popped out of my "bold holster" and fell. Now I got a cracked digitizer, LCD works perfectly fine. Went to eBay and got a replacement digitizer. Before I open up the phone, got a couple of quick questions:
1. Do I need to solder the digitizer to the LCD or just plug the cable in?
2. The double sided tape that attaches the Digitizer to the LCD, is that the normal thickness tape (say the one we get in Staples) or something thinner? If you know a brand that fits perfectly, it would be a great help.
View 14 Replies
View Related
Dec 22, 2010
I have a used BlackBerry Storm2 9550. There is a small issue with the touch screen digitizer, and replacing the digitizer will fix the problem. But the technician said thet, he can't replace the digitizer without replacing the whole LCD screen, as the both LCD screen and digitizer comes as a one unit. But on eBay I saw that some sellers sells the digitizer without the LCD screen.
Is it true? My LCD screen works properly. Can't I replace the touch screen digitizer, without replacing my LCD screen.
View 1 Replies
View Related
Aug 3, 2015
So about a week ago, a vertical strip of my digitizer stopped working, right through the "n" and "j" buttons on the keyboard. I looked into getting it replaced and was quoted around $150, which seems a bit steep for a phone I only plan on keeping until the N5 (2015) drops in a couple of months. Cut to this weekend and once or twice that portion of the digitizer started working again, but only for a few minutes at a time. So it looks like it may not be a hard failure. Could it just be a loose connector?
View 1 Replies
View Related
Jan 4, 2010
I have an HTC Fuze, and the up volume button does not work (might actually be stuck). I have tried a different ROM, so know that its a hardware problem. If I pick up a new LCD + Digitizer Like this would it likely cure the problem? Its my understanding that the volume rocker would simply push on a contact behind the button itself, on another thread I saw that someone who ordered the part linked above had to move their existing buttons to the new piece.
Since the linked piece above would include (I am assuming since I would move my existing volume rocker button over) the contacts, I am hoping that my logic here makes sense and it would fix my volume problem.
View 1 Replies
View Related
Mar 25, 2010
I recently changed the digitizer in my Samsung Impression, but the new one didn't come with any adhesive to hold it in. The old adhesive came off with the old digitizer. I'm hoping to find something better than what I'm temporarily using right now (tape). Really would like something close to the original. Or if anything, something the same thickness as the original that I can cut to fit myself. The only place I have seen any listed is on a trade site and they want you to purchase a minimum of 500.
View 2 Replies
View Related
May 27, 2010
I will be ordering a replacement touch screen for my N900 (stopped working for some reason). Was wondering if anybody else wanted to replace theirs. If there are enough people will try to get a better deal, if not 1 touch screen is around $62 Canadian plus shipping.
View 15 Replies
View Related
Aug 7, 2010
I need to replace the digitizer for my Fuze (the screen works fine, just no input)Is this something I can do myself? How does the digitizer attach to the screen? I took it to a repair shop and they said it can't be done because they are glued together.. I'm hoping for more of a sticky-back digitizer solution.. Has anyone done this repair?
View 1 Replies
View Related
Dec 30, 2011
i just rebuilt my HTC DESIRE HD, and it all starts up fine and the screen is on but when i try to unlock it does nothing... as if the digitizer is not working? maybe?
View 1 Replies
View Related
Jan 31, 2012
Cracked Digitizer- instructions to replace?I recently got the experia active, and was very impressed for about 9 days.Then a fat crack showed up in the "gorilla glass" of the digitizer.Neither sony ericcson nor the retailer (an ebay store)wanted to touch fixing this for me.So I bought a new digitizer, and am trying to figure out how to install it.I can't find those instructions anywhere.
View 4 Replies
View Related
Sep 27, 2015
Accidentally shut my z2 in the car door and the screen smashed. the phone still seems to be working as the alarm goes off on time but the digitizer doesn't work and i cant see the display to enter the unlock pattern. How/if can i retrieve the data? or have i lost the lot?
View 3 Replies
View Related
May 7, 2012
i recently have readjusted my iphone 4s;) it is originally black and i have removed the front screen, but my question is 'if i bought a white digitizer + screen, would it be completely compatible with the black iphone 4s?'
Info:
iPhone 4S, iOS 5.1
View 2 Replies
View Related
Aug 9, 2012
mi Xperia Mini Pro's touchscreen stopped working today. I cannot enter the phone to backup my data because I cannot swipe to unlock. Surely some genius from Google thought about this? Is there a backdoor or a way to enter the phone and use it with the keyboard?
View 2 Replies
View Related
Aug 2, 2010
over the last few days my dare's touch screen has been acting up. first it was making random touches, i figured there is a pocket of air underneath the screen. now the screen is not responsive at all, it does not feel like the screen has been pushed at all it is like its completely solid underneath the touch screen. the display itself is fine, so i don't think the lcd is the issue.
there also seems to be a spot underneath the display on the left side (see picture) that has been expanding since the problem started. again i don't know if its air or moisture. any suggestions? i have seen both oem lcds and digitizers on ebay for around $15, which is more likely the cause of the problem?i can't draw too well with the touchpad on my laptop but the white thing is supposed to be an arrow pointing to what i'm talking about.
View 2 Replies
View Related
Jul 22, 2011
Does Motorola intentionally make their new products inferior at release?I've been using a Droid and a Droid 2 for about 18 months.I shoot a lot of pictures outdoors, some macro, lots of nature and concerts.I also shoot indoors under challenging conditions (concert lighting.) They have both prtovided a passable point-and-shoot camera.The Droid 3 camera is dissapointing in that several important features have vanished:
-There is auto white balance, only a manual and difficult-to-use control.
-The user can no longer set ISO
-The user can no longer set EV
-Focus is iffy under a variety of conditions
-Photos have a bluish cast under most conditions, with and without flash
So instead of getting pretty good shots with a convenient camera, I'm getting washed-out, bluish garbage.(Issues with the video vs. Droid 2 also, in a separate post.)I want to know if Motorola intends to make the experience of this camera catch up with the spec soon, or if i should return my phone while I can still get something else from Verizon.
View 4 Replies
View Related
May 11, 2011
This morning my phone said it needed to do an update. So I hit update. about a minute later the screen went black and the motorola symbol popped up in the middle...than in the upper left corner it says Failed to boot 2 starting RSD mode......It will not do anything. I have taken the battery out several times but nothing.
View 1 Replies
View Related
Aug 2, 2011
I tried to do the update from morphine website and when it supposedly finished it rebooted into a failed to boot screen and then turns off. So what do I do now can I fix it or get a new phone?
View 3 Replies
View Related
Dec 4, 2011
What do I do when my screen says failed to boot 1. I've been on new software for several months and have not dropped my phone.
View 1 Replies
View Related
