I have a Droid2 and want to access the DVR monitoring system at work, the application needs to have ActiveX active within the Google browser. Has anyone found the same situation and/or an update for the Google browser ?
View 5 RepliesMy droid x2 global cannot access my work webmail which is https, however it can access another work https site. My work IT people say its a Motorola droid OS problem. I chatted with Motorola and they could not access the sites either, saying that the phone doesn't support it. They said they would attempt to fix the problem in the future.
View 3 Replies View RelatedMy phone states "Check for update was not available at this time. Try again later." I tried a factory reset, but to no avail... Same message still shows. Is there a manual update check?
View 5 Replies View RelatedThe TTS system doesn't work on my system.
View 1 Replies View RelatedI know when I had my Bionic you can hit like *# followed by numbers and that gets you to a screen to where you can block ads, is there a way you can do that for the Razr as well?
View 4 Replies View RelatedSince the new system update on the Razr maxx. Anyway to go back to the way it was? I loved my phone until now!
View 14 Replies View RelatedI bought my Bionic in September new from Verizon. I have not received a single system update since getting the phone and am still on version 5.5.886.XT875. Why am I not getting updates?
Currently, if I try to force an update, I get "Check for update is not available at this time. Try again later." I have been trying for the past 48 hours.
On top right side of phone, (droid bionic) the running system information is visible and constant. It is over everything else that is on screen. How do I hide it. It all of a sudden showed up one morning.
View 1 Replies View RelatedThis just happened. It's happened before in the past. When I open the maps application, it will completely lock up the phone and I have to do a battery pull.
View 2 Replies View RelatedI got the D3 yesterday and paired it with my preinstalled 07 MB GL bluetooth system. I can make calls fine, but the only data that transfers to the MB display is the phone numbers, no names or information. I have previously paired a Palm Pre, Droid X, iPhone 3G, HTC Thunderbolt(couldn't stand it, way too many problems/issues) and all of them paired fine and the data transferred showing name, place (work/cell/home) and the phone number in either numerical or alphabetical order.
View 9 Replies View RelatedHow can I stop an system update after its started? I'm trying to stop the download bcs its using all my data.
View 1 Replies View RelatedIt's great that Swype was included with the X2 so I didn't have to downlaod it, but the fact that it's a system application means it can't be altered and therefore we're stuck with an outdated version. I can understand that the included version was probably current when the Froyo firmware was written for the phone, but to not update Swype to the current version when you rolled out Gingerbread or remove it so we can update it ourselves doesn't make any sense. If I want to have the current version, which is improved, I have to root my phone to remove Swype so I can put it back on. Any plans to change this so we can actually control what's on our phones and keep the apps up-to-date? BTW, Swype's already got another version on the way. [URL]
View 2 Replies View Relatedmotorola droid bionic won't let me check my system updates
View 10 Replies View RelatedI did the system update on my Razr Maxx today & when it restarted, it said that my SIM card was recently removed & that I needed to verify my Motoblur password. Well, I didn't know what that was so my phone was totally locked. I got home & looked it up & it wanted me to put in my Motocast password. I did that & then it told me that it looked like my carrier was Verizon & that it did not support Motoblur. What the heck. So I had to do a full system reset.
View 10 Replies View RelatedDoes anyone know when the jellybean operating system will be available for droid 4?
View 8 Replies View RelatedScreen stuck on that droid turbo red clicking ok and just goes back to same ui message.
View 1 Replies View RelatedI tried to format the card and mount it. When I press format SD card, erase SD card box appears, I confirm Erase everything appears, I select it. Then I select Mount SD card, but nothing happens. I cannot take pictures. The phone works. When I insert SD card in my PC it shows a bunch of folders (all empty).
View 1 Replies View RelatedI am having force closes of system processes on my bionic. I have done a factory reset several times to which a day later the issues recur. Are there any files or something I can flash that will allow me to try and format everything and start over? When the errors pop up I try to recreate the issue and one out of 5 times I am able to do so. I have tried battery pulls and several factory resets/wiping everything. It even froze up and force closed on my one time when I was about to do the reset..
View 4 Replies View RelatedI have 2 MAXXs in the family. On #1, I went into System updates and updated to 181. I keep trying to do this on #2 and keep getting the following: "Check for update is not available at this time. Try again later." This happened on #2 before, but powering off reset it. This time I have tried powering off and on several times, but still cannot get the System update to work. The settings (wifi, etc.) are the same on #1 and #2. Any ideas to get the System update to work?
View 5 Replies View RelatedOff topic, but does anyone know how the 'points system' works for these forums? I tried looking around and couldn't find an explanation of it anywhere.
View 1 Replies View RelatedDroid Turbo (Android Version 5.1) - WIFI works fine at home and seems to work other places. I have been using it for months at work. Recently I cannot connect. Other people can still connect. I had the connection saved...but even tried deleting it and researching, but it won't locate the server.
View 1 Replies View RelatedEver since the last system update, the Contact Groups I created have an icon with a padlock next to them and I have no capacity to edit their content.
I can create new Groups (I assume, because there's a button that says I can), but can't change existing ones. I've tried going to the individual contacts to see if the group designation reside there now, etc. I'm wondering if this is tied to Verizon's Backup Assistant, somehow, though my groups don't appear on the web interface for that service at all.
Starting yesterday I have seen the above message 3 times. The only thing I have changed on the phone was to enable Motocast yesterday. Also, I replaced the 16GB SD card with a 32GB SD card, early last week. I've only had the phone for about a month. I have been able to power the phone off and reboot and get the phone functioning again. Last night it took 2 reboots before the phone became functional again. What can I look for to determine whats causing the error?
View 8 Replies View RelatedUnless I'm missing something, a comma no longer functions as a pause in the dialing system for a saved contact since the update. It used to be handy for dialing extension numbers, authorization codes etc. but they seem to be ignored after the update. There is also no apparent way to edit a phone number with any character other than the ones on the dialpad.
View 3 Replies View RelatedAs soon as I opened my N900 box, and found that cable for TV connecting, I was thinking, could it be possible to use this phone as video capturing device directly from video cam?Second thought was "that would also make fine monitoring device on the field".I know that I can connect this phone to some sort of network with my computer, and via that to get it to be a computer monitor if I like.My camcoder can send video through that TV-cable, so could it be possible?
View 6 Replies View RelatedWhat is a good app for security monitoring?
Info:
iOS 5.1.1, Application
I had an app on my droid that allowed me to password protect my pictures and also had one that allowed me to assign a folder to them that was not easy to acess. I had to do a reset on my phone and now I can't get to those pictures. They are still on the sd card because I can get to them if i plug into my computer. I have written the developers of the apps but have not gotten any response.
View 1 Replies View RelatedI keep getting an error stating; "Unable to add account. Please check your information and try again."Now, I'm not sure what my Mailbox name is.I was told to log in on my computer's browser to my work email via Outlook Web Access and put the cursor over the inbox to read the name on the bottom of the screen.This is all it reads: "https://webmail.(companyname).com/owa/#. What do I use for the mailbox name?
View 7 Replies View RelatedI recieved the 905 update a few days ago and everything has been going good untill last night when i no long connect to 4glte it only has 3g available.
View 7 Replies View RelatedIn the Email app, where do the saved messages go when you click on the menu key and click "Save email?" It's probably so simple, but I can't figure out how to access them.
View 4 Replies View RelatedAfter updating to ICS, I can't access Motoprint. It is in my list of all apps, and that is the only place it appears. I hard rebooted phone without success, and also installed updates, and reinstalled them, hard rebooted again, all without success. Do I need to start from scratch and do a factory reset?
View 10 Replies View Related