Old V9x was Telstra locked and ran on 3G 850 MHz (called NextG here) which suits me fine. Flip on phone got damaged, so bought another that is unlocked. Has GSM 850, 900, 1800, 1900 and 3G HSDPA, but not 3G 850.
Q1: Is the band availability able to be changed via software or hardware?
Q2: If it is hardware is there any issue with swapping the chip set PCB from old phone to new? (Have seen the dismantling stuff on the net)
I am not sure if any of you are as upset by this as I am, but it does not appear that I will ever be able to use WiMax in my home area (Directly north of Indy). The only possible redeeming possibility is if the Photon can be upgraded to LTE via software fix (similar to the Xoom). I have heard talk from multilple forums that it may be compatible since it has a sim card and that there is LTE in the build.prop file.
After installing an app called WIFI Analyzer and seeing all the AP's in my neighborhood I wanted my home network in a less congested area of the spectrum. I changed my home network and now I can't see my AP? The only thing I can think of is that the Razr Maxx does not support 5GHz as I see from the product spec page that N networks are supported.
Even though the Backflip comes to AT&T in a week, it looks to me that the Droid/Milestone may be the better phone. Bigger but better. But can I get one that uses all the AT&T 850MHz bands? It doesn't seem to be like Nokia, where I could simply buy the phone I wanted from (e.g.) J&R or NewEgg; where does one buy unlocked NAM (North American) Motorola Milestones from?
What frequency bands will the Telus Moto Milestone support? All the info seems to indicate 850/1900 for 3G and no info on 2G except for rumors saying the same as the EU milestone or only 850/1900.I was hoping for at least tri-band 3G and quad-band 2G. I am sick and tired of these phones with weak-sauce frequency bands.
Im trying to change my network provider from orange to 3, (i have purchased unlocking code) but since putting in the hanset the phone loading bar will only go up so far, not completely to the end to load up phone. is there another way around unblocking the phone so it will accept other sim cards?
I have a problem in changing the tone of the network notification.Whenever i send a text message , there would be a network notification from the service provider states how much money was deducted. That while its giving a tone which is annoying me often. so how do i mute it or where can i find setting to change the tone?I m using torch 9810.
Does anyone know if a version of the Galaxy S is going to be released with the AT&T 3g bands? I've heard AT&T is supposed to be receiving the Captivate, however, I have no interest in picking up a branded (and most likely crippled) phone. I wanted to purchase an unbranded and unlocked Galaxy S that supports AT&T 3g, but I search Google and the forums here and found no information about where to purchase one, or if one even exists. It shows on gsmarena.com that there is supposed to be a version of the Galaxy S with AT&T bands but I wanted to know if anyone has any information on where to purchase one or if one is actually going to be released and when.
I bought a BB Torch 9860 in USA, and I live in Argentina, and as I couldn't get 3G on it I was searching and I foun out that I got a wrong 3G bands units. mine is model RDQ71UW with bands 1-4-8, and local mobile provider here, Claro, explained to me that I need the bands 1-2-5-6, that I understand is on model RDP71UW.I also understand that it is not something that could gets re-configured.So I should buy a correct unit and try to sell this one, is that right?Is not possible to get this model in Argentina because we have many limitations to importations. at the States do they sell/use boht models? so, in that case I could get the correct one there, and also offer mine there, correct?What countries or regions uses each of those models?
I wanted to know if anyone who got this phone already is experiencing this.mine is comming in the mail in a coupple of hours and Im hoping i dont have a bad apple
Looking to upgrade soon and might have the option of getting a phone with just 850 3g band and wanted to see if there was a way to test coverage locally. My blackjack does both so that doesn't help alone, and if I set it to 850 gsm it loses all signal. That might mean no 850 3g, but wanted to be sure that was the case and if not conclusive what I can do to see signals in the area.
I purchased a Q9C on ebay. The phone is flashed is Sprint ready but the phone is branded ALLTel hence Sprint won't activate the phone. However, I have several old phones I would like to change the ESN of the Q9c with that of my other phone. First of all, will that work (that is will Sprint activate it) and secondly, how do I do that? Does anyone have directions? I tried QPST but NVM folder is locked
My other half gets an error on her Razor Maxx phone that says " Network error please check the network" . It comes up just about every time she does anythign with the phone. She called the provider and did troubleshoot it and they say nothing is wrong with the settings and network. Almost say that it isn't happenning. This has become quite annoying and I've seen it myself. I have same phone and no issues with mine at all .. we purchased at same time and did upgrades at same time as well
The battery monitor on my Zoom seems to be stuck at 100%. I have been using it for a couple of hours and it is still showing a full charge. Currently in JB. Anyone else experienced this?
Whenever I take a picture, I like to hold my phone vertical. Hence, all my pictures are sideways. Is there a setting or an app I can get that will change the orientation of my photos?
Did anybody experienced this? Look at the screenshot...A few days ago, the telephone app changed, and just today, same thing happened with Chrome.n the app drawer, though, the original icons are shown.
I have the 200MB plan and use the internet when I am ONLY on WiFi networks. However, while exploring 2.2, I recall seeing a setting that, if the WiFi connection drops, the new setting stops the Bravo from using the 3G. If the Bravo changed over to 3G to maintain the internet connection (apparently the default setting), massive data charges would be incurred. I have tried to re-discover this setting but no success to date. Any way to use / change this "WiFi to 3G" setting?
As the title says, I am looking for a way to change the text alert (for when someone sends you a page), both volume and actual sound used, using an app or smart actions (in much the same way you can change the ringer using smart actions).Unlike most people I want it to get really loud and anoying at night (when I am likly asleep) so it will wake me up.I am also looking for a way to alarm/chip/alert/notify again if I have unheard messages or unviewed pages. Right now there is this blinking LED on the front. That is nice, but it won't wake me up or let me know if I went to the other room for a sec.
My husband and I have recently purchased the droidx2 and have encountered problems with texting. The incoming text appears in the notification field at the top of the home screen from the correct sender, but when we open the text, the sender contact has been randomly switched to another person in our contact list. This is happening quite frequently and is resulting in texts going to very random people. Occasionally when composing a text, the chosen recipient will randomly change when we press the send button.
Whats that all about? I currently have 3G only (we get 4G in Oct!!!) and it changes color sometimes from blue to white. I assume people have ssen this with 4G coverage too. Why does my phone do this?
I prefer to see the agenda view of my calendar on my Droid X.However, it keeps on going back to the day view when I return to the calendar.It used to show the month view when I went on my calendar and I don't know how or why it changed to the day view.Also, if I put a new event on my calendar on my phone, when I save it, the phone returns to my calendar at two months earlier.
New member so forgive my mistakes. I have read the other threads on the above issue and they seem dated. I want to delete the original Gmail acct that the tech set up and use my regular gmail account without doing a factory reset to defaults.When I bought my Motorola Atrix at Costco in April 2011 the tech deleted all my phone contacts, data, and photos when trying to transfer to the Atrix. Then he set up a new required Gmail account for the Atrix and gave us the wrong password and security answer which I can not recover despite numerous tries with Google.I have another Gmail account with a good password and it is also on my Atrix. I can access both Gmail accounts on the Atrix because the unknown password is stored somewhere on teh phone. I cannot access my account settings to determine the correct password for the Gmail account I want to delete.What I'm really trying to do is somehow link my Atrix phone number to my regular Gmail and Motoblur acconts so I can use the Android Market from my PC and other functions. I cannot find anything on my regular Gmail account that allows me to link my Atrix phone with that account. It appears the phone is linked to the original Gmail acct the Costco tech set up and that I cannot acccess any settings on. The only settings (from both Gmail accts) I can access are the general ones that control notifications, rings, and messages.
My solution was to delete the account that I don't have a password for and then I would then a way to add my Atrix to my regular Gmail acct as the new Atrix acct or visa-versa. I will keep it screwed up if the only option is to reset to facotry defaults and lose everything. In a related question is there a way to transfer all my Atrix data to the micro SD card and then take it out and then reset?
On my Droid X2, I would like the standard email app(POP3 for Cox) to open in folder view, inbox, sent, deleted, etc and not default to opening to the contents of the inbox. Is this possible?
Also, I moved a message from my sent folder to the inbox and then decided to move it back. Inbox and Trash are the only locations available when I select the message and then select move.