Motorola Atrix 4G :: Around 20-30 Secs To Get The Signalbar Symbal Appear With ATT On The Statusbar?
May 6, 2011
Atrix is my first smartphone. I am very happy and don't have any problems with it (may be I did not do all the stuff with it yet ). Also didn't have any issues with the updates .57 and .83. Getting to know more and more stuff at this site1) Every time I wake the phone from sleep (turn the screen on) a red circle with a line is appearing on the signal bar symbol with no ATT on the statusbar and it is taking around 20-30 secs to get the signalbar symbal appear with ATT on the statusbar.2) When some body called me, they hear ring sound but I don't get the call for around 6-10 sec. I tried calling my phone from a another phone, same thing I hear a ring but my Atrix don't get the call for 6-10 secs.Are the above two normal?3) I connected my Atrix to a TV through the HDMI cable and I was able to do all the stuff with the opned app.
My device was working fine, but suddenly my screen went blank(device turned off without any warning), an then thinking that it must be off I tried switching it back on but in vain. There was no response from the device. After these failed attempts I plugged it into the charging port and since then it is coming to the Google Flash screen(the one before the bubble animation) and then switching back off within a sec. I tried going to the Boot screen but in vain coz I dnt get enough time to select even Power off or any other option. What to do...I went through a few forums but could not decide what to do finally. And i need my Nexus 5 back to proper woorking as soon as possible without any data being erased.
New 9700 4 days ago. Set ringer tone to Ringer_Classic Phone. When a call comes in my BB rings once and that's it. It does not go to voice mail for approx 30 seconds. I can't find out how to change this so that it will ring 5,?, 6? 7? times to give me the opportunity to hear it. Any ideas on the solution?
Since Friday I've been unable to hold a phone call for longer than 20 seconds and been unable to send text messages. The call fails every time at exactly 10 or 20 seconds. This applies whether the call is incoming or outgoing. I have tried pulling the battery and that fixes the problem temporarily but it usually returns within about five minutes. I am still able to receive text messages.
Phone Info: Carrier is Bell Mobility Blackberry Bold 9000 OS v5.0.0464
so I have the maps loaded onto my phone, but when I use the Directions (like sat nav) mode it quits after 30 secs with the message 'Enter Shop' or something like that? I am using the service offline - if that makes any difference?
id like to buy one of those over 3000mah batteries for my atrix 2 , but where i live i can only find this batteries for the atrix 4g and im not sure if it works on the atrix 2.
My Motorola Atrix or Computer has a Problem install the ADB Interface so there for my phone wont connect to my Computer.I have a windows 7 32-bit operating system.I have tried installing Drivers Manualy, tried using the PDAnet Solution, tried unistalling all USB Ports, tried applications to help.
Will the Lapdock (and other accessories for that matter) work for the new Atrix 2 coming? I've only used the Lapdock lightly and it will be a real shame if it and the other accessories I've purchased over the past year won't work with the 2nd gen Atrix.
I recently had to get a replacement Atrix through AT&T after my original one shattered. I had insurance and AT&T provided me a refurbished one through their insurance program. My question is, will I still be able to get all future updates on this phone or is there something I need to do?
I did the Jelly Bean update on my two month old Atrix HD yesterday. Then my apps started closing on their own and then the homescreen started doing the same thing. Tried to do a FDR and I have the little android guy on my screen now with what looks like a rotating atom in his belly and a blue progress bar below him. Been like this for several hours now and I even tried calling the Motorola people and I'm still where I was. Can anyone offer a solution before I take it back to where I bought it from to see if they will even replace it? I did the holding down the volume buttons simultaneously and then the power button, got the motorola logo and then goes right back to this annoying little android guy with the rotating atom in his belly.
Other android devices have the ability to synch with picassa to view their online albums am I missing something or is this a big whoops not included on Moto's part.
My Atrix has the latest update applied and has started recently showing the following error message:"com.motorola.service.main had stopped unexpectedly" Touching ok returns to the home screen for 1 second and the error reappears. This makes the phone unusable.I have performed a factory reset and the error was away for 24 hrs but now it has reappeared.
Since yesterday all of a sudden my battery started draining like crazy, 100% to 40% in 2 hours. Battery manager shows com.motorola.service.main taking 60% battery.what is this process and why it is taking too much of battery?
When I go to edit contacts I see that motorola services contact has the same contact replicated 10 times or more. How can I solve this if I want to edit the contact information?
Im wondering why MML doesn't have an option to turn it off. I don't use it much and short of installing it I see no option for it not starting up every time I turn on my computer.
For some strange reason I can't set a PIN on my 4G. It takes the PIN just fine, but when I turn the phone off and back on again, when I slide the little lock icon, the phone does NOT prompt for the PIN!
I noticed that I had not been receiving my yahoo mail lately and went to accounts and it showed under my Motoblur accounts. After not being able to get it to work I deleted the account to try and reinstall it. When I go to Add Account and select the Yahoo Mail icon under Motoblur accts then put in the email address and password I get an error msg "Login to the account failed, please try again." I have checked and rechecked that all of the info is correct and it is.
Just 4-5 days back I bought Motorola Atrix4G from Amazon...But the moment I turn on the my new phone it got switched off within 5 minutes, By power key also I was unable to turn on the phone, after removing the battery it got started, till the time I haven't charged it, so no external USB or Power was attached to phone....once it started I thought I got rid of my problem..... But It's happening Again & Again & Again & Again with this phone, it's getting off & I have to remove the battery to make it on, now I got pissed off ......I loved this phone so much & i want to use this
So yesterday my phone's fingerprint scanner began acting up. It would think I was swiping my finger when, in reality, I wasn't and saying It couldn't identify my finger. After a couple restarts, the fingerprint scanner doesn't work at all.I decided to go the route of a factory reset through the android recovery mode and wiped the data. After this, I select reboot now and all I get is a black screen with the green status LED stuck on.
My Atrix turned off by itself and refused to turn on when I pressed the power button. I know it wasn't a battery issue as I had charged it all day. The only way I could get the phone to turn back on was to remove the battery and then put the battery back in.
I recently purchased an unlocked at&t Atrix, although it came from hong kong and I'm using it in Aus with Telstra sim. I cannot send picture messages (mms), although the internet works no worries, I have tried various APN settings but nothing
When you have a multiple SMS messages list, you reply to one of them, the reply goes to someone else.[URL]So far I have encountered this bug on several occasions on all versions of the official software released so far for the Atrix.The way it seems to be manifesting itself on the Atrix so far is.You have message from sender 1 in your inbox.You receive a message from sender 2. You reply to sender 2.Message actually goes to sender 1 Message details, and message thread on the device show it sent to sender 2?
