Motorola Atrix 4G :: Unable To Connect It Via Bluetooth To My Car
Apr 18, 2011
I upgraded my Atrix 4.1.57. Since the upgrade, I have not been able to connect my phone, via Bluetooth, to my car. The phone and car find each other, the phone asks for the PIN code and it says connected. But, when I try to connect the phone to my car, I get an error message that the car has rejected the connection.
The first time I tried it out it worked fine and now my Atrix is paired with the mouse, but now the mouse will continue to flash blue (which I belive means that it is searching for a device?) but will not connect.
I purchased a Atrix2 sometime back but just recently was looking to connect it to my PC to download some stuff onto the phone.When I connect my phone to the PC (windows 7 64 bit), the PC is not able to install the required drivers for my motorola phone. It fails with an error that says failed to install something called "ADB" drivers. I've tried installing the drivers from the page below to no effect :http://www.motorola.com/Support/US-EN/SupportHomepage/Software_and_Drivers/USB-and-PC-Charging-DriversAlso if I put my phone in the "Charge only" mode, on the phone I see the "lighting" icon continously coming and going on the battery icon in the notification bar at the top of the phone.
Can bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
My new phone is correctly paired with the blurtooth in my 2011 Subaru Forester and connected and worked, but does NOT auto-connect when I restart the car, I have to go into bluetooth settings on my phone, and tap the device "Car_Media" to make a connection. My previous phone worked correctly and auto-connected when I started the car.. I've fully deleted all devices and pairings from the car and the phone and re-paired the new phone several times. NG. How do I get the Atrix to auto-connect?
I have laptop with Nokia Suit 3.4.49, nokia C6-00 Software Version 41.0.010.When i am trying to connect my phone to laptop, nokia suit detects my phone through bluetooth, but not further action is initiated, not able to sync anything or send songs from laptop to phone.
I want to connect nokia N95 8gb with my Laptob using bluetooth serial port, but i'm shocked when discovered N95 does not support serial port profile and the laptob can not open virtual bluetooth serial port to transfer data.
My E7 (Anna upgrade installed, but the problem existed already before Anna, from the very first day I used the phone) has incredible problems in connecting with Bluetooth.I have paired my E7 with several computers (one Lenovo, one Compaq, one HP - all having the latest Ovi suite) and with my car kit (Nokia 616). With all of these, getting the Bluetooth connection up and running is pain.It seems that when the phone is freshly powered on, connection can easily be initiated. But if the phone has been powered on for a longer time (like half hour or more), it usually can't get connection to remote party.Previously I had N97 and N97 mini and there were no problems with these.
I am unable to connect my laptop and my phone (5800 XpressMusic) through Bluetooth. When I run 'Nokia PC suite', it detects the phone, it also asks for the pairing code and then I get a message (on my laptop) - "Cannot authenticate the phone".
For some time now my moto x has been unable to connect to WiFi or Bluetooth. I have been unable to find a solution. I have now come across the second update where I am unable to download it because of a lack of wifi. I downloaded Motorola Device Manager on my PC after being prompted today and it told me there was no update found, but my current software is "NA". I am not sure how to solve this issue. I have talked to AT&T and they want me to pay the $100 to get the phone replaced, but as I am eligible or an upgrade in a month or so I feel that is a waste of money.
I am unable to connect iPhone 3GS to car audio system via Bluetooth. When I turn in bluetooth in settings (in iphone) the icon appears on the top bar, but as soon I turn away from settings screen the bluetooth icon disappears. I have been trying to connect to my car audio system via Bluetooth which used to work properly a few weeks back.
So has anyone found a work around for the problem with the Nissan bluetooth systems in the car. It will connect with my phone but once you start talking the car disconnects from the phone and then trys to reconnect and then disconnects till I hang up.
I upgraded my X10 to 2.3 a few days ago and since then I cannot connect to my bluetooth. I have re-paired the phone and bluetooth and it worked for a while but now it refuses to connect again.
Today I tried to pair my Atrix with my PC for the first time and was unable to pair the devices. After several failed attempts I noticed that the Bluetooth on the Atrix would not restart either from the Widget or settings menu. Turning the phone on and off repeatedly still would not get the Bluetooth to turn back on. Previous to this attempt at pairing with my PC the Bluetooth on my Atrix has been working just fine in my car.
I've been having consistent problems with volume, specifically being too low, and especially while connected to a bluetooth headset. I also noticed some odd, and likely related, behavior with the volume in general.
My 2006 BMW X5 comes with a bluetooth handsfree feature. It used to pair and work with my iPhone very well. Now, I am off the iPhone and much happier with my Atrix.However, the bluetooth doesn't work too well. I can pair the phone with the car fine. However, the phone keeps constantly disconecting and connecting (like every minuto or so), which makes it unusable with the car's handsfree. I know it is not a problem with the car (it still pairs fine with the iPhone) nor with the phone (it pairs well with my bluetooth headset). It's just the combination that is bad. I've read somewhere else that BMW's are tricky and several android users are having trouble. It seems that android lacks a handsfree profile required by BMW. Anyway, is anyone having the same problem? Any ideas of what can be done? (I've already unpaired all phone from the car, repaired, removed the battery from my phone, etc, etc, etc).
I'm unable to connect to internet over the phone via bluetooth connection. But i'n able to connect to internet via usb cable. I believe it might be a bug as i'm able to use bluetooth to sync my contact to PC and transfer photo to other phones
I just updated and configured my brand new Bold 9900 OS 7.0 Bundle 2406 for my Bluetooth devices and two of them that previously worked have issues. They pair perfectly but both devices are unable to connect a ringing call, disconnect a call in progress or initiate a phone call. If I answer or place a call from the phone, the Bluetooth device engages but the voice is only one direction. I have tried turning Encryption on & off under the device properties and no difference. I have verified the one Motorola device is listed as Compatible with my bold so what's up here?
I am having problems with random and frequent disconnects with the Atrix 4G when on Bluetooth while connected in a car. Initially my setup was using a Motorola Roadster and while playing audio I would randomly not get sound, then shortly after I would get the message that the phone was no longer connected to the Roadster.Usually it would eventually reconnect, sometimes almost immediately after. This would happen sometimes as often as every few minutes, while other times it could play a half hour or more before encountering the problem.
Initially I was unsure whether it was the Atrix itself or the Roadster, but after having recently purchased a Ford F-150 with SYNC bluetooth connect, I am encountering the exact same behavior with random disconnects. Unfortunately with the Ford SYNC, I never get it to automatically reconnect, and I must go into the phone, turn bluetooth off and back on, then manually reconnect from the phone.Most of the time I have the Atrix connected through the Motorola Car Dock, but I think the same behavior has occurred out of the dock.I have never noticed this same behavior with other bluetooth devices I have - Jawbone Icon, Monster iClarity speaker. I don't know if I have enough data to tell definitively or not, but I think I have only observed this when the auto was in motion.
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
After updating to the new JB, my ATRIX will not stay paired with the bluetooth radio in my truck.Before JB, I had no problems.Anyone else have any pairing issues after the update?
For some reason I am no longer able to turn on Bluetooth on on my Atrix. When I turn it on, it looks like it is turning on but then the widget and/or settings panel check box go back to the off state.
I've tried rebooting but it doesn't seem to make a difference. I've seen other posts which recommend a factory reset but I would prefer to not do this as I only factory reset my phone about a week ago.
Immediately after the phone connects to the Bluetooth built in car phone, the "bluetooth in-call volume" of the phone goes to 0. I can't hear a caller until after this volume is raised. I can only adjust it during a call using the volume control on the phone. It stays at that level until the BT disconnects, but the volume is again 0 after reconnecting.Is there anyway to permanently set this volume level? It is a complete pain otherwise. If I can change the volume before a call, not only during, that may be acceptable.More info: I have a Motorola Roadster external phone headset, too, and it doesn't behave this way. The car manufacture claims it is the phone that sets the volume not the car. The car has the latest firmware.