For some reason I am no longer able to turn on Bluetooth on on my Atrix. When I turn it on, it looks like it is turning on but then the widget and/or settings panel check box go back to the off state.
I've tried rebooting but it doesn't seem to make a difference. I've seen other posts which recommend a factory reset but I would prefer to not do this as I only factory reset my phone about a week ago.
Today I tried to pair my Atrix with my PC for the first time and was unable to pair the devices. After several failed attempts I noticed that the Bluetooth on the Atrix would not restart either from the Widget or settings menu. Turning the phone on and off repeatedly still would not get the Bluetooth to turn back on. Previous to this attempt at pairing with my PC the Bluetooth on my Atrix has been working just fine in my car.
View 12 Replies View Relatedtried reboot and battery removaleverything else works
View 5 Replies View RelatedFor the last several weeks neither the WiFi nor the Bluetooth will turn on. When selecting to turn on WiFi is starts to turn on then stops and displays Error. About 75% of the time after attempting to turn on the WiFi the phone will reboot. I have factory reset the phone and the WiFi and Bluetooth will work once after the reset but once the phone sleeps neither WiFi nor Bluetooth will operate. This is even after a power down. I have checked my settings and can't find anything that would cause this.
View 3 Replies View RelatedSo I updated to the latest software available on my Z3 from Sony a few days ago (23.4.a.1.264) then on Friday the WiFi and Bluetooth completely stopped working, I couldn't connect to my pebble and my data started to get eaten up.
Since then, I plugged it into the computer, backed up the data then ran a system repair through Sony PC companion to no avail, and booting into safe mode does nothing either.
Can bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
View 4 Replies View RelatedOn 1.83, when charging the phone, after 90%, the LED came on (green) and stayed on until the phone was unplugged.
However, on 2.3.4, the LED doesn't come on at all during charging.
My new phone is correctly paired with the blurtooth in my 2011 Subaru Forester and connected and worked, but does NOT auto-connect when I restart the car, I have to go into bluetooth settings on my phone, and tap the device "Car_Media" to make a connection. My previous phone worked correctly and auto-connected when I started the car.. I've fully deleted all devices and pairings from the car and the phone and re-paired the new phone several times. NG. How do I get the Atrix to auto-connect?
View 3 Replies View RelatedI bought a new work computer and tried using USB tethering with my Atrix. It installed the NDIS adapter but I was getting the infamous 169.x.x.x address. I decided to try it later since I was in a hurry.Now, the phone will not start USB tethering at all. I plug it in and the USB Tethering check box has a light green checkbox like it's turning on, but never changes. I have rebooted and pulled the battery. No change. What's strange is that I plug the USB in and when I go to the tethering screen the USB checkbox is already checked automatically. I seem to remember having to enable it manually before all this started.
View 5 Replies View RelatedMy LED notification is no longer working. Is there some place to adjust this I am missing? Or is mine just broke?
View 3 Replies View RelatedFor the last month (since I bought it) my phone won't hold a charge for longer for 8 hours. This was on 1.26 and 1.57 and now on 1.83
Basiclly I am running corparte sync to Exchange and nothing else right now. I was running a live wallpaper and weather (turned off when battery would die) and same result no matter what I run. Heavy phone use or no phone calls. At my house I have a microcell, but work is low signal. Also Corp HQ where I spend 1 week a month has full H+ connection. All seem to last about 8 hours at all three locations. AT&T gave me a new battery and I have wiped 2 times in the last 2 weeks.
Here is what the battery manager says running after 6 hours.
Now look at the pics, Display seems really high. I am on auto brightness, and have a screen lockout of 2 minutes. This screenshot was from 6 hours of use. No phone calls, vibrate and no signal when picture was taken. Display was used 28 minutes of 6 hours of use.
AT&T just tells me to either wipe device or turn of push on snyc. 8 hours is not right for a new phone with no calls and light use.
I just noticed that Bank Of America App does not work with the lastest update. After I log in, I just get a white page.
View 3 Replies View RelatedAfter ICS update I can no longer view my photos that existed before the update on my phone or on a Android tablet or Windows PC.
If I take a new photo I can view it on the phone but no where else.
When I open the photo gallery and tap the menu button>go to> the only options given to me are may, april, march, february. As recently as a few days ago that list of dates/times was much longer and included days such as today, yesterday, last week, etc. How can I restore the longer list of dates to "go to".
View 5 Replies View RelatedMy volume buttons no longer work on my Moto Atrix phone. I was thinking about taking apart my phone but taking off the back does not make it any easier to get to where the volume buttons are.
View 7 Replies View RelatedCan we sync exchange email longer than 30 days or is this a new Gingerbread thing? Pre Gingerbread I could sync all mail
View 1 Replies View RelatedI performed a factory reset today to remove MySpace from my phone (I was unable to remove it any other way) and now I am having an issue with my phone.A number of my notification icons are now showing in gray instead of in color. The two that stand out the most are email notifications from POP emails (the red stamp) and from Gmail. Each of these now shows as a gray icon. This is minor, but annoying that my phone is behaving differently than it should. I am running 2.3.4 and have tried multiple resets (full resets removing all data and media)
View 1 Replies View RelatedDoes anyone know why it takes my Atrix so long to wake sometimes? There are times I will hit the power button and I can count off one thousand one, one thousand two, up to one thousand six before the screen will light up and then it lights up for just a second and then it goes dark like it has timed out because of inactivity.It is a real wonderful feature when I am showing off my state of the art, top of the line, Android Flagship Motorola phone to people.It does this regularly if I have not used the phone for more than an hour or so and sometimes it will happen sporadically during periods where I check the phone every few minutes, like when I am expecting important emails.
I did a factory reset and removed all of the factory bloatware apps and updated my phone so that it is current on .83.I did not put any apps onto the phone, I left it alone, just set up my accounts.And the phone still has the problem with the long wake cycles.So I went ahead and put my apps back on my phone.Oh, and I tried with and without the SD card in the phone as well. Checking all possible variables.So does anyone else enjoy such long awakening cycles or am I the lucky one here? Does my Atrix need to go on permanent vacation at the AT&T store while I acquire a replacement? Or is this the nature of all Android devices and I should just suck it up?
I read that the update would "improve the keyboard functionality". Well I updated this morning and my keyboard no longer vibrates when I touch a key, or if it does it is barely noticeable. Is this intentional? Was a setting changed/re-set due to the update? Is there a way to control the amount of vibration when you push a letter? I am missing the space bar constantly because it doesn't vibrate.
View 2 Replies View RelatedI just upgraded to 2.3.4 or 4.5.91.MB860.ATT.en.US, whatever you want to call it. Now, Gmail doesn't show up in the Messaging app, only my texts and Yahoo email. Is this a 'feature,' or can I do something to get Gmail back in the messaging app?
View 4 Replies View RelatedChase mobile banking no longer functions after 4.1.83 patch. I get Error message unable to log in at this time. Still works for iphone and ipad. This has been confirmed by others on android central?
View 15 Replies View RelatedAlright, over the past week, my bluetooth has been acting rather spotty, then today, it just stopped working completely. Now when I plug it in to charge, the little LED on the side will quickly flash three times in red, then it goes to a long red, then a long green with no break inbetween red and green. When I unplug it and attempt to turn the device on, all I'll get out of the headset is a low tone for a few seconds, then nothing.
I've attempted to contact Motorola via the live chat and a 800 number they gave me from there, but all they can tell me is that their system is down and wont be up till early next week. Fine, I just want to know what the flashing means (Obviously it means something otherwise it wouldn't be flashing, right?) and if there's a possible fix I can use to have my headset working again for the time being.
Tried this headset yesterday and the volume was very low on the phone. Which Motorola headset has the best earpiece volume for the Atrix?
View 4 Replies View RelatedI've been having consistent problems with volume, specifically being too low, and especially while connected to a bluetooth headset. I also noticed some odd, and likely related, behavior with the volume in general.
View 1 Replies View RelatedMy 2006 BMW X5 comes with a bluetooth handsfree feature. It used to pair and work with my iPhone very well. Now, I am off the iPhone and much happier with my Atrix.However, the bluetooth doesn't work too well. I can pair the phone with the car fine. However, the phone keeps constantly disconecting and connecting (like every minuto or so), which makes it unusable with the car's handsfree. I know it is not a problem with the car (it still pairs fine with the iPhone) nor with the phone (it pairs well with my bluetooth headset). It's just the combination that is bad. I've read somewhere else that BMW's are tricky and several android users are having trouble. It seems that android lacks a handsfree profile required by BMW. Anyway, is anyone having the same problem? Any ideas of what can be done? (I've already unpaired all phone from the car, repaired, removed the battery from my phone, etc, etc, etc).
View 3 Replies View RelatedI am having problems with random and frequent disconnects with the Atrix 4G when on Bluetooth while connected in a car. Initially my setup was using a Motorola Roadster and while playing audio I would randomly not get sound, then shortly after I would get the message that the phone was no longer connected to the Roadster.Usually it would eventually reconnect, sometimes almost immediately after. This would happen sometimes as often as every few minutes, while other times it could play a half hour or more before encountering the problem.
Initially I was unsure whether it was the Atrix itself or the Roadster, but after having recently purchased a Ford F-150 with SYNC bluetooth connect, I am encountering the exact same behavior with random disconnects. Unfortunately with the Ford SYNC, I never get it to automatically reconnect, and I must go into the phone, turn bluetooth off and back on, then manually reconnect from the phone.Most of the time I have the Atrix connected through the Motorola Car Dock, but I think the same behavior has occurred out of the dock.I have never noticed this same behavior with other bluetooth devices I have - Jawbone Icon, Monster iClarity speaker. I don't know if I have enough data to tell definitively or not, but I think I have only observed this when the auto was in motion.
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
View 9 Replies View RelatedAfter updating to the new JB, my ATRIX will not stay paired with the bluetooth radio in my truck.Before JB, I had no problems.Anyone else have any pairing issues after the update?
View 5 Replies View RelatedImmediately after the phone connects to the Bluetooth built in car phone, the "bluetooth in-call volume" of the phone goes to 0. I can't hear a caller until after this volume is raised. I can only adjust it during a call using the volume control on the phone. It stays at that level until the BT disconnects, but the volume is again 0 after reconnecting.Is there anyway to permanently set this volume level? It is a complete pain otherwise. If I can change the volume before a call, not only during, that may be acceptable.More info: I have a Motorola Roadster external phone headset, too, and it doesn't behave this way. The car manufacture claims it is the phone that sets the volume not the car. The car has the latest firmware.
View 5 Replies View RelatedI am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
View 3 Replies View Relatedhow to sync my contact list from my Motorola Atrix to my 2011 Kia Sorento.I can pair the unit but does not copy(or see my) contact list.Have gone to my dealer and 2 Bell service centres.
View 1 Replies View Related
