I've been having consistent problems with volume, specifically being too low, and especially while connected to a bluetooth headset. I also noticed some odd, and likely related, behavior with the volume in general.
View 1 Replies
Immediately after the phone connects to the Bluetooth built in car phone, the "bluetooth in-call volume" of the phone goes to 0. I can't hear a caller until after this volume is raised. I can only adjust it during a call using the volume control on the phone. It stays at that level until the BT disconnects, but the volume is again 0 after reconnecting.Is there anyway to permanently set this volume level? It is a complete pain otherwise. If I can change the volume before a call, not only during, that may be acceptable.More info: I have a Motorola Roadster external phone headset, too, and it doesn't behave this way. The car manufacture claims it is the phone that sets the volume not the car. The car has the latest firmware.
View 5 Replies View RelatedCan bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
View 4 Replies View RelatedMy new phone is correctly paired with the blurtooth in my 2011 Subaru Forester and connected and worked, but does NOT auto-connect when I restart the car, I have to go into bluetooth settings on my phone, and tap the device "Car_Media" to make a connection. My previous phone worked correctly and auto-connected when I started the car.. I've fully deleted all devices and pairings from the car and the phone and re-paired the new phone several times. NG. How do I get the Atrix to auto-connect?
View 3 Replies View RelatedWhen recording a video I do not have any volume when I play it back. Yes my volume rocker is turned up. It doesn't play when I transfer it to my computer either. Very, very frustrating.
View 4 Replies View RelatedMy Cliq recently stop functioning correctly as a phone. I can make and take calls, but only if I use the head phones or put the phone on speaker phone. I have read on other forums that this is somewhat of a regular problem with lots of different phones, but none have a real solution. I have tried all of the usual remedies as far as shutting down/battery pull/system reset etc.
View 1 Replies View RelatedI was wondering if there is any way to increase the volume or sensitivity on the mic? I am a soft talker and it makes it really hard to talk to people on this phone. I have seen the apps called volume boosters for the speakers.
View 1 Replies View RelatedMy phone call volume is fine but media playback volume is WAY too loud! Even with the phone volume and headset volume at the lowest it's too loud. This has only been a problem since the Gingerbread update. I tried the H17 on another phone and it works fine. Definitely a post Gingerbread issue.Anyone else have issues with this model headset or any other since the update?
View 1 Replies View RelatedWhy am I constantly plagued with the "Low on volume space: Internal storage space is getting lo"? Nothing in shared folders. Protected content - all any of those things take me to a black screen w/ nothing there. SD card, yes, that's where I keep 29.17GB of 32GB of almost all music - it's the whole reason I bought this phone in the first place. Why does it pester me, and is there a way to make it stop?
View 8 Replies View Relatedthe headset jack resetting to the max volume everytime the wired headset is unplugged and plugged back in? I am having this issue when using the wired headset for voice calls.
View 10 Replies View RelatedMy volume buttons no longer work on my Moto Atrix phone. I was thinking about taking apart my phone but taking off the back does not make it any easier to get to where the volume buttons are.
View 7 Replies View RelatedI have a Motorola Atrix 4G (US) and was wondering if it would be possible to show the lock screen from pressing up or down on the volume buttons. It worked for my previous phones and would be a great alternative for this phone.
View 2 Replies View RelatedAny bluetooth headset I pair with my photon is too loud. Yes, I turned the volume down on headset and phone. I know its the phone cause I have paired the headset(s) w/ other devices, and the volume will go down all the way. Tried an app (Volume Ace Free) and it did nothing. Bottom line is when media volume is set to minimum its still WAY too loud. This is not an issue w/ wired headphones.
View 1 Replies View Relatedmy S10 HD which has great volume with phone calls but volume is too low when playing music Did a reset but no luck...Am I missing something I have tried 3 different headsets and all are the same
View 2 Replies View RelatedMusic volume is too low to hear but phone calls are fine did a reset and it was ok once but has never been the same volume as volume with wired earphones am I missing something?
View 3 Replies View RelatedMy bluetooth devices work fine with my previous phone (Sanyo SCP-3810). Main device is LG HFB-500 speakerphone. But the volume is much too low with my Motorola Triumph. Can barely hear anything at max volume. Seems to be a common problem for Android devices. How about a fix Moto?
View 15 Replies View RelatedDoes anyone notice the bluetooth volume is low when you first make a call? I notice each time I place a call, I have to tap the volume rocker up or down to boost volume to the preset listening volume. I've tried this on two separate headsets and both results are the same. I do make sure the volume is at the max on the my headset (plantronics hd pro) I am not sure if this a normal function on the admiral to protect the eardrum from unexpected sound.
View 14 Replies View RelatedA few weeks back I noticed that the call and music volume on my Bluetooth headset (Jawbone ICON) seemed to stuck at half-volume or less, despite appearing in the volume settins to be at full. This makes the Bluetooth unusable for phone conversations except in the quietest of rooms.
I have reset the ICON on numerous occasions -- blew the pairing off the Bionic (and did a hard reset) but to no avail. Nothing seems to bring the volume back up to the way it was.
Sometimes - not always - when I connect my phone to any Bluetooth audio device the Bluetooth volume (by design I believe) drops to half volume. When I hit the Volume Up button the bar will move up in a weird, sporatic way and never actually get louder, however it will eventually show full volume. Sometimes when I hit the Volume Down button it'll shoot all the way back down to half volume with one button press and I can then press Volume Up again to actually turn up the sound. Most other times it will shoot down to the bottom and never change volume until it's completely muted - so it'll jump from 50% volume to silent right at the end.
It doesn't happen every time - just about once every 10 or so times. This has happened to me with two different RAZR Maxx phones and I've seen my roommates RAZR do the same thing on a couple different Bluetooth devices.
I'm hoping the ICS update will fix it but the bug made it through the last OTA update.
Tried this headset yesterday and the volume was very low on the phone. Which Motorola headset has the best earpiece volume for the Atrix?
View 4 Replies View RelatedToday I tried to pair my Atrix with my PC for the first time and was unable to pair the devices. After several failed attempts I noticed that the Bluetooth on the Atrix would not restart either from the Widget or settings menu. Turning the phone on and off repeatedly still would not get the Bluetooth to turn back on. Previous to this attempt at pairing with my PC the Bluetooth on my Atrix has been working just fine in my car.
View 12 Replies View RelatedMy 2006 BMW X5 comes with a bluetooth handsfree feature. It used to pair and work with my iPhone very well. Now, I am off the iPhone and much happier with my Atrix.However, the bluetooth doesn't work too well. I can pair the phone with the car fine. However, the phone keeps constantly disconecting and connecting (like every minuto or so), which makes it unusable with the car's handsfree. I know it is not a problem with the car (it still pairs fine with the iPhone) nor with the phone (it pairs well with my bluetooth headset). It's just the combination that is bad. I've read somewhere else that BMW's are tricky and several android users are having trouble. It seems that android lacks a handsfree profile required by BMW. Anyway, is anyone having the same problem? Any ideas of what can be done? (I've already unpaired all phone from the car, repaired, removed the battery from my phone, etc, etc, etc).
View 3 Replies View RelatedI have noticed that my speaker volume is very low after I disconnect from my Bluetooth stereo. It has become a problem because I have missed my alarm the next morning because I don't hear it. I have narrowed it down to the Bluetooth being the issue but I don't know how to fix it. Do I not disconnect correctly?
View 1 Replies View RelatedI just got the Razr HD on Thursday when it became available and I love it so far. I connected my Sony Bluetooth stereo headset (url...). So, not the typical one ear peice just for answering calls. I got them because I listen to music on phone while at the gym and the wire from my old headset kept getting in the way. So, these worked great with the Droid X, never had a problem. I connected them to my Razr HD and the volume instantly goes the the max and cannot be turn down. I use the volume rocker and the volume stays at the max volume until I turn the volume all the way down at which point there is no sound. I can't find a bluetooth volume slider in the sound volume settings and the "Music, Video, Games, & other media" volume control isn't doing anything to adjust the volume for my headset. The headset does not have a volume control of its own and right now I can't use it becuase it is way too loud. I know there ways to be able to adjust the volume for each device independently on custom roms and rooted devices why can't these simple things be added to "stock" roms? Anyone know how to get the volumes to work without having to go to a custom ROM?
View 9 Replies View RelatedI am having problems with random and frequent disconnects with the Atrix 4G when on Bluetooth while connected in a car. Initially my setup was using a Motorola Roadster and while playing audio I would randomly not get sound, then shortly after I would get the message that the phone was no longer connected to the Roadster.Usually it would eventually reconnect, sometimes almost immediately after. This would happen sometimes as often as every few minutes, while other times it could play a half hour or more before encountering the problem.
Initially I was unsure whether it was the Atrix itself or the Roadster, but after having recently purchased a Ford F-150 with SYNC bluetooth connect, I am encountering the exact same behavior with random disconnects. Unfortunately with the Ford SYNC, I never get it to automatically reconnect, and I must go into the phone, turn bluetooth off and back on, then manually reconnect from the phone.Most of the time I have the Atrix connected through the Motorola Car Dock, but I think the same behavior has occurred out of the dock.I have never noticed this same behavior with other bluetooth devices I have - Jawbone Icon, Monster iClarity speaker. I don't know if I have enough data to tell definitively or not, but I think I have only observed this when the auto was in motion.
tried reboot and battery removaleverything else works
View 5 Replies View RelatedWhen I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
View 9 Replies View RelatedAfter updating to the new JB, my ATRIX will not stay paired with the bluetooth radio in my truck.Before JB, I had no problems.Anyone else have any pairing issues after the update?
View 5 Replies View RelatedFor some reason I am no longer able to turn on Bluetooth on on my Atrix. When I turn it on, it looks like it is turning on but then the widget and/or settings panel check box go back to the off state.
I've tried rebooting but it doesn't seem to make a difference. I've seen other posts which recommend a factory reset but I would prefer to not do this as I only factory reset my phone about a week ago.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
View 3 Replies View Relatedhow to sync my contact list from my Motorola Atrix to my 2011 Kia Sorento.I can pair the unit but does not copy(or see my) contact list.Have gone to my dealer and 2 Bell service centres.
View 1 Replies View Related
