For the last several weeks neither the WiFi nor the Bluetooth will turn on. When selecting to turn on WiFi is starts to turn on then stops and displays Error. About 75% of the time after attempting to turn on the WiFi the phone will reboot. I have factory reset the phone and the WiFi and Bluetooth will work once after the reset but once the phone sleeps neither WiFi nor Bluetooth will operate. This is even after a power down. I have checked my settings and can't find anything that would cause this.
Today I tried to pair my Atrix with my PC for the first time and was unable to pair the devices. After several failed attempts I noticed that the Bluetooth on the Atrix would not restart either from the Widget or settings menu. Turning the phone on and off repeatedly still would not get the Bluetooth to turn back on. Previous to this attempt at pairing with my PC the Bluetooth on my Atrix has been working just fine in my car.
For some reason I am no longer able to turn on Bluetooth on on my Atrix. When I turn it on, it looks like it is turning on but then the widget and/or settings panel check box go back to the off state.
I've tried rebooting but it doesn't seem to make a difference. I've seen other posts which recommend a factory reset but I would prefer to not do this as I only factory reset my phone about a week ago.
I have a few problems with the Atrix 2 and curious if others see these things.First...I really like this phone. I like the size, the weight, the speed, the apps, etc. was annoying enough that I decided to use my bluetooth headset. The sound improved immeasurably by doing that. But, I noticed that while at work, listening to music, that I couldn't turn on wifi while I had bluetooth engaged. The music would haltingly play, like a skipping disk, until, finally, after about 30 seconds it stops altogether. As soon as I turned off wifi, the bluetooth playing would reengage where it left off and play perfectly.I also notice that with the plugged in mic or with my bluetooth headphones connected, if a call comes in while I'm listening to something, about 1/2 the time, the phone wouldn't ring or vibrate.
After a weekend of operation I tried to turn WiFi on only to have it turn itself off after 15-30 sec. It happened 3 times before I powered down and back up, that fixed the problem. It may be a memory leak as the phone had been on for 3 days, or maybe it was related to the fact that it had gotten to a low battery state over the weekend and it turned off some services to save battery and didn't turn them back on after it was charged. I have very few apps loaded and dont think thats the problem, but I did use Googles navigator this weekend for the first time since I updated to GB.
Can bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
My new phone is correctly paired with the blurtooth in my 2011 Subaru Forester and connected and worked, but does NOT auto-connect when I restart the car, I have to go into bluetooth settings on my phone, and tap the device "Car_Media" to make a connection. My previous phone worked correctly and auto-connected when I started the car.. I've fully deleted all devices and pairings from the car and the phone and re-paired the new phone several times. NG. How do I get the Atrix to auto-connect?
The WiFi and Bluetooth capabilities on my LG G3 phone randomly stopped working yesterday and both connections won't turn on. I have tried to enable both connections, but the phone either lags out or does not recognize the command. This isn't the problem of the LG G3 not recognizing networks or finding Bluetooth devices, but both connections won't even enable.
I've tried factory resetting and that did not remove the issue at all.
All of a sudden my phone started heating up and battery would drain 100% in like 4 hours ! :/ and then after i restarted, i just can't turn my wifi and bluetooth on. If i try to turn bluetooth on, the phone wuld just keep on restarting untill the system closes down the process "com.process.bluetooth". I repaired the phone using Sony Bridge, the phone doesn't restart now, but it still heats up and I can't use Wifi and Bluetooth.
just wondering how the warranty works. as title says i live in ireland but bought my z2 from amazon.de and it needs to be sent back to the factory because i cannot turn my wifi or bluetooth on after a complete update and factory reset. rang the support and she said she would email me instructions but its an hour ago and still not received anything. does it matter if the phone was bought in germany? what sort of receipt do i need or do i even need one?
After couple of months running on the latest 5.1.1 system, neither WiFi nor Bluetooth turning on to connect to any network. Both only display "turning on" but after seconds they automatically turning off.
my 4gs works fine, except.... the wi fi in general settings is not able to turn on. the icon stays light gray and does not respond to touch the bluetooth shows 'off' and then sits & 'spins' when i tap it. ive re synced, re set, etc
So I updated to the latest software available on my Z3 from Sony a few days ago (23.4.a.1.264) then on Friday the WiFi and Bluetooth completely stopped working, I couldn't connect to my pebble and my data started to get eaten up.
Since then, I plugged it into the computer, backed up the data then ran a system repair through Sony PC companion to no avail, and booting into safe mode does nothing either.
1) Bluetooth wont turn on, but wifi works 2) Factory Reset to 5.1.1 , 5.0, 4.4.x doesn't work
My Nexus 5 refuses to turn on Bluetooth only. The slider moves to the right and then back again. I have factory reset the phone 3 times, flashing different versions from 5.1.1, 5.0 and 4.4.x to see if it fixes the problem, but I have had no luck. I know some other people have had problems too, but there doesn't seem to be a clear solution. I don't know if it is a hardware issue, since wifi works fine and the wifi and Bluetooth antennas are one unit located on the back cover( according to my understanding). I tried replacing the back cover from a different nexus 5, but still couldn't get Bluetooth to work.
-(When i lock my phone or when it locks itself it reboots) fixed -I can't turn on wifi and bluetooth -(Can't copy files to phone) fixed
I tried this [URL] .... but in the step [URL].....
I don't get any problems. I did the second command but it also didn't solve the issue that I can't copy files. I tried resetting to factory settings twice, didn't do anything. I tried putting it in the refrigerator but didn't do anything.
99% sure it's hardware issue, gonna RMA the phone.
I've been having consistent problems with volume, specifically being too low, and especially while connected to a bluetooth headset. I also noticed some odd, and likely related, behavior with the volume in general.
My 2006 BMW X5 comes with a bluetooth handsfree feature. It used to pair and work with my iPhone very well. Now, I am off the iPhone and much happier with my Atrix.However, the bluetooth doesn't work too well. I can pair the phone with the car fine. However, the phone keeps constantly disconecting and connecting (like every minuto or so), which makes it unusable with the car's handsfree. I know it is not a problem with the car (it still pairs fine with the iPhone) nor with the phone (it pairs well with my bluetooth headset). It's just the combination that is bad. I've read somewhere else that BMW's are tricky and several android users are having trouble. It seems that android lacks a handsfree profile required by BMW. Anyway, is anyone having the same problem? Any ideas of what can be done? (I've already unpaired all phone from the car, repaired, removed the battery from my phone, etc, etc, etc).
I have had some troubles with my Bionic the past few weeks.I have a Wifi network at home but not in my Office or car.I will keep the Bionic's Wifi at home on all the time,but will turn it off whne I leave.Many times when I will either walk into another place of buisness or just get a text message when the Wifi is off,it will turn the Wifi on.So,it's searching for Wifi and taking the battery life down as well.I have taken the battery out with the Wifi on and rebooted.
I am having problems with random and frequent disconnects with the Atrix 4G when on Bluetooth while connected in a car. Initially my setup was using a Motorola Roadster and while playing audio I would randomly not get sound, then shortly after I would get the message that the phone was no longer connected to the Roadster.Usually it would eventually reconnect, sometimes almost immediately after. This would happen sometimes as often as every few minutes, while other times it could play a half hour or more before encountering the problem.
Initially I was unsure whether it was the Atrix itself or the Roadster, but after having recently purchased a Ford F-150 with SYNC bluetooth connect, I am encountering the exact same behavior with random disconnects. Unfortunately with the Ford SYNC, I never get it to automatically reconnect, and I must go into the phone, turn bluetooth off and back on, then manually reconnect from the phone.Most of the time I have the Atrix connected through the Motorola Car Dock, but I think the same behavior has occurred out of the dock.I have never noticed this same behavior with other bluetooth devices I have - Jawbone Icon, Monster iClarity speaker. I don't know if I have enough data to tell definitively or not, but I think I have only observed this when the auto was in motion.
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
Immediately after the phone connects to the Bluetooth built in car phone, the "bluetooth in-call volume" of the phone goes to 0. I can't hear a caller until after this volume is raised. I can only adjust it during a call using the volume control on the phone. It stays at that level until the BT disconnects, but the volume is again 0 after reconnecting.Is there anyway to permanently set this volume level? It is a complete pain otherwise. If I can change the volume before a call, not only during, that may be acceptable.More info: I have a Motorola Roadster external phone headset, too, and it doesn't behave this way. The car manufacture claims it is the phone that sets the volume not the car. The car has the latest firmware.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
I upgraded my Atrix 4.1.57. Since the upgrade, I have not been able to connect my phone, via Bluetooth, to my car. The phone and car find each other, the phone asks for the PIN code and it says connected. But, when I try to connect the phone to my car, I get an error message that the car has rejected the connection.