I own a business and having my contacts phone numbers is an abosolute necessity for me.I've noticed that after importing all my contacts from my SD card (after having setup the phone and creating a MotoBlur account, adding facebook, and a couple of email accounts) that the contacts whom had a Facebook profile, it REMOVED the phone numbers that were previously attached to the contact file.Is there a way to keep the phone from doing this? It did this to each contact that had a facebook profile that didn't have their phone number on their facebook profile.I've tried to go in and edit the contact but it tells me that you can't edit a facebook profile / contact.
Glad to have Atrix on Gingerbread. it fixes my bluetooth issue. now i got into something else
1. i noticed that for some contacts that have 4 phone numbers and 2 emails, the phone numbers are all jamed together in one line, rather than listing them one by one. any idea how to fix it? by the way, the contacts are maitained in my google mail/contacts already.
2. how to add a voice tag to a name/contact? i found my atrix had hard time recognizing a name and always messed it up with other contacts. so i want to find a way to make it easier for the phone to recognize it when i say "Call xxx" (some especially for some non english names).
On 1.83, a Contact will show as many phone numbers as I entered for it.But on 2.3.4, if one of the numbers is non-standard, like "*82-1-800-555-1212" (entered without the hyphens, of course), it doesn't show up under that contact. It still stores it, but I can't use it, can't dial with it, etc...Is there any way around this bugEdit: It shows up okay, if it's the *only* number for that Contact. But if there's another one (formatted normally), the non standard one doesn't show.
Communications Authorities in Egypt changed Mobile networks numbers for all three providers by adding a number to each provider, for instance mine starts with 010 it will be 0100 and so on for other two providers adding 1 and 2.Now I have more than one thousands (1000) contacts in my phone book, how can I add this new digit to multiple contacts instead of editing one by one.
My iPhone keeps deleting numbers. I don't synch it to anything. This morning I was texting a friend on the bus and 10 minutes later her name disappeared. I am constantly having to re-input names and numbers.
I've had my Atrix since May 2011 and 3 times now it has completely wiped my calendar.I've looked through the forums on here but all I can find is the suggestion that syncing to gmail may be the problem. However, I am fairly certain that I have set everything to NOT sync with googlemail etc, as I do not use calendars anywhere but on my phone. Could I have missed something which means my phone is trying to sync with an empty calendar somewhere - but if so I would have expected it to do this more than 3 times in as many months?
i've owned an Atrix now for about a month and very time i save events and appointments to the calender within a couple of days they all dissapear the data gone.
I just purchased my Atrix phone yesterday. I am a complete newbie. At the store, the sales person moved my phone contacts from my old phone to the Atrix. When I got home I added my Facebook account and the app sync'ed my facebook friends to my contacts. Now I don't see any of the original contacts that were transfered when I purchased the phone.Is this a bug with the Facebook app, have the numbers been deleted or is there a setting that will display them?
I regularly lose song files on the 32GB MicroSDHC card (Class 10) in my Atrix 2. They disappear without a trace, and without notice of any kind. I've been checking my music directory regularly with a file explorer app, and I've noticed that they tend to disappear whenever minor changes are made to the SD card (mounting/unmounting the card, connecting to my PC, adding new files to the card, revising existing files, etc.). I've tried using different SD cards, different PC connection methods (MotoHelper and USB Mass Storage), but nothing seems to work.
Is Android 2.3.5 not reading the card properly? I don't see the point of using an SD card with this phone if I can't guarantee that the files will stay accessible.
I have a Microcell in my office. The 3G and EDGE signal is -100 or worse, so there's no conflict there. The wifi signal in my office is low, ~-80db, and often disconnects/reconnects. Every once in a while my Atrix (stock gingerbread) loses the microcell connection completely and continues to have no network connection. The wifi connection stays connected though. I have to enable and then disable airplane mode to get the connection back up.
So after upgrading OTA to 2.3.6 and performing a factory reset on my Atrix 4G, I've noticed that stock google talk app loses connection with the server after a few minutes while the phone is asleep. As soon as I wake up the phone, The network status icon is gray and within 30 seconds or so, the phone reconnects with the google servers and the icon turns blue again.
I've never had this issue before while on 2.2 and 2.3.4. I've made sure the app is always open and background data is enabled. Also my battery mode is set to performance mode so it should sync all day.
I purchased a silicone jelly case for my Atrix 2 phone. However, when I put it on my wi-fi signal strength decreases. Is there a way to prevent this from happening?
My wife and I both have Atrix 4G phones. I frequently get a Popup window when I unplug the charger reminding me to unplug the charger. This happens both with my 12V to USB adapter plugged into my motorcycle and with the home charger from Motorola. Also, I lose the settings for my home wireless and have to re-enter everything. I've gotten notifications that I'm using up my data plan because I lose my wireless and emails then start downloading over the cell network without my knowing it. I'm about ready to get rid of the so called smart phone and go back to my basic cell phone.
I finally broke down and installed the Atrix HD update yesterday. What a mistake. Prior to installing the update, I could drive from home to work and have the battery drop from 100% to 95% in about 20 minutes or so (which, is terrible as well). Today after installing the update my battery went from 100% to 87% in the same 20 minutes. I can't believe that an update that was presented good for battery life actually makes it worse! I can say however, that the performance of the phone is better (touch responses, less laggy, etc, but I am sure that is at the cost of battery life). Other than a hard reset is there anyway to get this update off of the the phone?
Atrix is no doubt fast and an a great contester to any smartphone, I have no issues with it, except being in Australia. We space the dialed numbers differently..how to remove or adjust the dashes between numbers?
I updated ATT software, now my BMW 7 Series only displays contacts' phone numbers (in numerical order) and not contacts' names. I've done all the trouble shooting I could conjure up (already spoke to ATT/Motorola Tech/BMW), all to no avail.
i want to copy my phone numbers from sim to phone.contacts-more-import contacts-sim card.....and when i push import all it says to me contacts partially imported.what to do
I am wondering how do you make all the numbers associated with a contact copy over to the phone? For example, aunt c's numbers are 954... and 305... on the sim card but when I copy all contacts only the 954 number is copied.
The screen on my phone is broken so I can't access any of the information on my phone. I need the phone numbers for work and its very important that I can get them back. The lady at the phone store wasn't able to retrieve the numbers, but told me to get on here and it would work if I hook a cord up to the phone. I never updated my account or had an email account associated with my phone and updates on this site. How can I get the numbers back?
I have read about duplicating contacts, but that is not my main problem. My problem is that instead of one phone number for any given contact, there may be up to 30 of the same phone number! If there is a cell and home, both will be duplicated. What a pain! I do use mobileme but have not started on the cloud yet. Any ideas how this can happen? I showed them my iphone 4 (IOS 5.1.1) at the Verizon store and the rep said she never saw anything like that before. I live two hours from the nearest apple store.
I work for a charity & we want to see if we can move our names & mobile No.s from Access Database &/or Excel Workbook onto the Blackberry Curve 8900 so as to text all of the contacts at once.
When in Greek Display language (not in English) and in Contacts, Phone fields, entering of an '0' number, I get displayed a highlighted 'W' instead.This of course can be stressfully corrected via a copy and pasting an '0'char else use my phone in English Display Language.
Did anyone else, in any other than Greek Display Language have that same problem?
My phone is: BB Torch 9860, OS 7.1 bundle 2061 but I had that same issue with 1149 (as bought)
I have a non-rooted, Galaxy S5 on AT&T which forwards any phone number not in my contacts to voicemail after one short ring sound. I have Android lollipop version 5.0 but this problems has been happening for months even under Kit Kat version 4.4.4 and 4.4.2.
I checked call rejection, interruptions, blocking, and cannot find the root cause or remediation. I am also using tasker but I cannot find anything enabled there either. AT&T insists they are not doing anything on their end.
My wife and I own iPhone 4S phones and will be traveling with them to England for the first time this coming holiday season. We have Verizon service with international calling enabled, and intend to use Verizon's international calling plan for the period while we are to be traveling (no swapping for European telco SIM cards). We each have extensive Contacts lists in our phones, and both are synced to our Address Books on our home iMacs. We have our US contacts memorized in the standard area code + number format, and similarly we have our Brit friends' cell and home phone numbers memorized in the "011" (US exit code) "44" (England country code) + number format. With that we can of course call US numbers as normal and the Brits just fine while here in the US. But when we are overseas I suspect we would need a different number sequence to connect with family back here in the US if needed, and we certainly couldn't call the English phone numbers from within England using the 011-44 prefix before their numbers. Is there anyway to prepare for that situation short of re-entering a bunch of phone numbers for while we are away, and then changing it all back again when we return a few weeks later? How do people who travel overseas frequently, say on business, handle this? Multiple numbers in different formats for each Contact?
Is there any way of getting the actual phone numbers to show when in the "Contacts" screen instead of just the contacts name. If I want to look for a phone number, it means that I have got to click on each contact name to bring up the next screen with the phone number etc on it and then click back to the contacts screen and keep doing it all through the list of contacts.
With my old HTC Desire it used to show both right at the start.
Can't see my contacts phone numbers on the Bluetooth connection to my car now I have updated the Andriod to 2.1. I could see them before on Andriod 1.6.