IPhone :: Sending Contact Via Bluetooth To Sony Car Stereo
Mar 12, 2012
I have iPhone 4s iOS 5 and have successfully paired (bluetooth) with my new Sony DSX-s310BTX car head unit. When I search for a contact through the head unit, it will load the entire (huge) list of contacts and allow me to navigate through the headunit to a contact to make a call (very clunky - SOny's poor design). So, it sees the contact list successfully. The head unit allows for me to enter six presets contacts into a list of popular numbers for easy access, but after the head unit is set to accept an addition to this presets list (it displays "waiting" prompt on the display), I need to know how to "Send the phonebook data by operating the cellular phone" as the SOny instruction manual says to do. I've contacted Sony support, and reviewed the pdf iPhone 4s manual (as well as these discussions), with no luck. It seems it should be under Contacts > select individual contact > Share Contact, but that only gives the option to share via Email or Message (sms), not Bluetooth.
Here are details of my "chat" with SOny support (there is not such "Send Contact" or "Sync Contact" option in iOS): 3:28 PM Austin - (C6QB): After selecting the contact, use the option on how to send it to other devices.3:29 PM Austin - (C6QB): On selecting the contact, use the Send Contact option.3:30 PM Austin - (C6QB): On the next screen, select Via Bluetooth.3:32 PM Austin - (C6QB): It might also have an option of Sync Contact instead of Send Contact.3:32 PM Austin - (C6QB): Please refer to the Manual of the iPhone to check the exact steps on how to send a contact via Bluetooth.
I just upgraded to lollipop on my turbo. Overall, I like it quite a bit. However, I noticed this morning that when my phone connects via Bluetooth to my car, it no longer displaying the contact photos on the car display. It was working fine immediately before the installation.
I just marked and sent all my contacts from my old phone to my new satio via bluetooth, but my Satio kept coming up with messages saying please save to folder and thats it. How can I mark all the contacts sent to save to contacts on Satio.
I have too many numbers to fit on my SIM to move to the Aino, so is there a way I can bluetooth them from my C905 onto the Aino? I cannot remember for the life of me how I did it last time, but yesterday lost everything after doing a software update from Sony! Luckily still have numbers on old phone!
I own a 2014 Chevy Equinox. The car's auxiliary connector does not work with the G4, so I connect with a stand alone Bluetooth device plugged into my cigarette lighter. The problem is the volume is about 50% lower via this method. I'm thinking it's the Bluetooth device I'm using. I tried about a dozen vol u me apps and none of them work
I have been trying to use a Motorokr s9-HD bluetooth stereo headset to listen to music in the gym but my connection gets very choppy. Is this kind of interference a limitation of bluetooth in general or do I need a different headset?
Since upgrading to ICS, connecting to my car stereo via bluetooth causes the phone to reboot itself. At first i thought it was just whilst streaming music was causing it as i could play 3 or 4 tracks before the phone just shuts down and reboots.
However, today i just had it connected for the phone function only and the same thing happened after 5 - 6 minutes.
The stereo is a Sony MEX-BT3900U which worked perfectly prior to the upgrade.
Carried out the upgrade using Odin3 v1.85 and flashed following one of the guides on the forum. Everthing else appears to be working fine and i quite like the new look etc, but if i can't find a solution to the phone rebooting itself think i will go back to GB.
Having a problem with calls over bluetooth through a Pioneer car stereo with a Galaxy S2. I can make and receive calls ok, and the stereo mutes whenever a call comes in. Call audio is directed through the stereo speakers, but the person at the other end cannot hear me. If I switch the call to the phones speaker they can hear me ok, but this means I have no audio through the stereo. Pressing the privacy button on the stereo appears to have the same effect. I saw one suggestion to try disabling media over bluetooth, and have tried this but the problem persists. I have tested the connection using an iphone and it worked perfectly.
I purchased a pair of S10-HD (allegedly) stereo headphones yesterday. I paired them with my iMac/OS10.6.8, but they only play in mono. My other bluetooth headphones from Creative play stereo just fine, so why does my S10-HD only play in mono?
I have a stereo with no bluetooth, but would like to stream Pandora or other music from my phone to the stereo. Now, I use an aux. cable from the headphone jack to the aux on the stereo, but I hate having the cable running from the phone to the stereo. Anybody know of a bluetooth adapter that plugs into a stereo to do this?
Since Nokia maps became free to use for driving with spoken directions, I've decided to use it again on my 5800 rather than another piece of Nav software that I had. Whilst it seems to work great, my only problem seems to be that it announces the directions over Bluetooth. As my phone is connected to my car via a built in Bluetooth kit (parrot), whenever I activate routing with spoken directions, the phone takes over the audio and mutes the stereo (with "PHONE" displayed on my factory head unit). The stereo is then muted for the whole journey or until I exit from Nokia maps. So it seems my only options are driving without music, or mute the 5800 and route without spoken directions ?
I just purchased and tested the Miccus Bluetooth Audio receiver.The setup and syncing of the device was easy and successful.However, as soon as I began playing back any media on the phone and outputting the sound via the wireless Bluetooth protocol, I heard very bad static and distorted sound on the stereo, which is connected to the Miccus receiver.I then tested the Miccus receiver on my roommate's 8530 blackberry and the sound was crystal clear! What gives? And could this be a software or hardware issue with the 9650?(phone calls via separate bluetooth headset work fine)
I recently switched from a BlackBerry Z30 to the unlocked Lumia 950 Dual-SIM. I have been slowly moving things over and so far it has been working out OK until last night. That's when I tried to pair my 950 with my 2010 Toyota Prius. No matter what I do, it only reports "Connected Voice" but no music.
I was able to Bluetooth connect and stream music on my Z30, Z10, and my wife's iPhone 4 and 6, so I don't think this is an issue with my car. I looked around online and in the forums and saw others reporting issues with 8.1 and a couple with 10, but there really wasn't a fix that I could see that applied to my situation.
My Photon must be having Apple envy and has decided to refuse to cooperate. Unlocking can still be an occasional two minute ordeal with many whispered metaphorical condemnations of it's heritage and habits. However, my main complaint is the bluetooth audio stutter I hear on a stereo headset.
I have no problems pairing and listinening to audio on a set of bluetooth stereo headphones via my MacBookPro (or my friend's iPhone), but the Photon makes me want to kick something very hard and repeatedly. The audio stutter-pop every 1/3 second (approximatly) is beyond frustrating.
The only thing that reduces the stuttering is if I hold the phone within 3 inches (yes, 3"!) of the headset. Oddly, my mono canal-style headset has a range of about 36 feet. Both of the headsets are less than two months old, and I know that the stereo headset is up to version 3.x of the bluetooth spec. (the Photon is using bluetooth v. 2.1).
I have an iPhone 4 and want to use it to hook up to an aftermarket Pioneer stereo via USB. I was wondering if anyone has already done this and if anyone has had any issues. I don't have the stereo yet because I am a little wary of incompatibility because I have heard that iOS 4 has some issues with car stereos. Let me know if you have done this or if you have gotten it to work.