HTC One M7 :: Why Isn't Phone Being Recognized On PC
Oct 29, 2014
When I used to connect my HTC One to my PC by USB, it would pop up under 'My Computer' and 'Internal Storage', and I'd be blissfully free to drag and drop pictures and music back and forth between the two.
NOW when I do the same, under 'My Computer' I'm left with an E drive which asks me to insert and disc and a 'HTC One' option that is treated as a camera by the computer and shows me nothing.
I accidently used blackra1n on a 3.0.1 iPhone 3G and it put the phone in recovery mode and that's all the iPhone is doing now... The phone is NOT recognizing that anything is plugged into it now... Before doing this the computer did recognize the phone.Also, the power button is broken.
So I'm working on my XPeria Z2 when 2 weeks ago the headphones stopted working. I have tried everything but nothing works. So I have just installed an app so I have to select the audio output myself all the time. I tried this morning a last solution => repair with the Companion software from Sony itself (I wish I had never done that!!!!)  After the companion software downloaded the files, shutdown my phone he asked the plug it back it while holding the volume btn down (Flashmode). When I tried this nothing happend, phone didn't turn on and setup on the pc did not continue. So I just hit cancel. Than thinks get from bad to worse. Now no pc on earth is detecting my phone anymore when plugged in. As well, I do not get the charge symbol anymore. It's like the phone is not connected to anything.  I aswell tried to boot into flashmode myself but I just get a rapid RED and GREEN led and then nothing. The only think that is working is to start in Bootloader modus (Yes, I have unlocked the bootloader modus because of the error with the headphone jack
My Galaxy S6 SM-G920F with lollipop 5.1.1 AP : G920FXXU2BOG8 CSC : G920FOJV2BOG8
Has stop being recongnized by pc, i almost tries anything i know and find on net. The pc doesn't recongnise it on device manager (i have a win 7 pc), the phone however react as pluged in a charger. Their is no mtp or mass storage switch on notification.
I have reinstall the driver of samsung several times with smart switch & also made it manual by suppressing directrly the samsung usb driver from programs on control panel then reinstall it but no hope. I can't figure out eitheir its hard or soft. I had change my cable & also test my pc with another Galaxy s6 it works fine, but mine no.
i have made wipe cache / factory reset also made an initialisation from parameters the phone is formated but not recognised by the pc also test it on another pc but the same behaviour windows pcs doesn't recognise my phone.
However, i figure out that when its on the restore mode (volume down + lock + home) the pc recognise it by Odin and smart switch. I install the same rom on it also made an emergency restore with S/N and model and the process completes fine with smart switch and i saw the donwload progress bar completing on my phone. But still i m stuck its not recognised...
I tries to use *#0808# and its on AP / MTP + ADB but no hope
I plug it on ADB android studio but the device list is empty ....
When I connect my phone to my PC as media device (MTP), it is showing a camera icon just like when I connected as camera (PTP) device. The same is happening when I connect my phone as a camera device (PTP), which is not a problem. How to make my computer recognise my phone as MTP device and transfer files?
I am using windows XP, and this started to happen when installed Sidesync 3.0 (a samsung app)
I follow all the steps to make my iPhone recognized on iTunes.But it is not recognized on Windows 7. It don't appears on My Computer, and it does not ask for install driver when I plug it in.
Only charges when plugged in, slow charging notification pops up. No new hardware "ding" sound. No new devices in device manager. No devices with exclamation mark in device manager. No unknown or unrecognized devices in device manager. No devices listed in usb-view
Background : I was on Windows 10 build 10581. Upgraded to 10586. All fine.
Phone showed up and everything. However I wanted to go back to 8.1, so I started up the Windows Device Recovery Tool. It asked for a mandatory update. Updated. It recognized my phone (which was on). Started downloading server side software. I ran out of battery (the laptop), and it shut down. After starting up again, the phone is unrecognizable.
I unintsalled Windows Device Recovery Tool and tried to install again. Error. Several times. Finally after cleaning up everything related to it (RevoUninstaller), I managed to install it again. However, my phone still never is recognized. Uninstalled all Nokia/Microsoft drivers (no luck).
I'm really hoping someone can help me. My phone will not connect to my pc when trying to update using sony ericsson pc companion.I have been unable to update it with the last two updates and in my desperation last night to make my phone work I have backed up using my backup after reading that the sony ericsson backup app won't work after the update, and then restored factory settings. It hasn't fixed it. It still won't work.
I should also add that I have tried this on 3 computers and they have all said the usb device is not recognized. It is clearly my phone. It has very recently been having problems charging in all chargers however this problem has been going on for a lot longer!This is driving me insane. Before this I loved my phone, despite the many faults!!
2 days ago i did the 2.3 update on my phone, since the upgrade my phone refuses to recognise the sim card in my phone. Also if i try to connect my phone to pc vis usb cable it says 'please insert memory card and reinsert usb' tried this maybe 10 times nothing. So my question is how the **** do i get the phone to recognise that there is a memory card in it? I don't need the SD card for contacts etc as they've all been synced just really want my photos/music back & be able to use my camera again.
I have a Lumia 1020 and like two months ago it just stopped being recognized by my pc for syncing it. I tried connecting it to a mac and another pc and it is not recognized. I reset my phone but that didn't work. I'm using the original cable but it does not work.
After update to wp 8.1 Prev my phone didn't recognized by my laptop (windows 7), Its been more than 9 months now. I thought its a bug in preview so I dont really care and use to move data by Remote device manager. Than I got the denim update....then wp 8.1 Update 2.... now windows 10 Technical Preview but my phone didn't recognized. Change many data cables and tried on 3 different laptops with different OS but not get luck. Than I took my laptop and all the data cables I have to the Mobile Phone Market I searched for Lumia 1020. And surprisingly I found 3 devices having update wp 8.1 not any developers preview or windows insider app. They all connected with my laptop instantly with my data cables. The 3 difference I found in my device and other devices are:
My Device:
Software: Windows 10 Mobile Technical Preview OS version: 10.012534.56 Firmware revision Number: 3051.50009.1451.1001
All other Devices:
Software: Windows Phone 8.1 Update OS version: 8.10.14219.341 Firmware revision Number: 3051.50009.1451.1002
After new update, my phone doesn't seem to have a mobile network. I tried calling at&t we did some troubleshooting, they recommended a back up and restore to undo any updates but that didn't work. I have a galaxy s5... I can't go on the Internet or social media unless on WiFi. If I receive picture messages it won't let me download them/view them even on wifi....
so i just got 8900 and inserted 2gb media card but i can only add stuff on it using desktop manager and i ditched my iphone just because i was so controlled by itunes, cant i just copy/paste into folders on the phone?
Today i moved my motherboard from iPhone from 1 phone to other and now, the screen is blank. I tryed with 2 differenent LCDs but the screen is blank.iPhone is recognized by iTunes and it does output the sound. But there is no picture. Tryed with HOME+POWER button, but it did not work.Is the problem in motherboard now?
I am having a trouble with my Zylo phone. When I get the sms the phone does not recognize the number and display the sender's name. I was not having this issue from the beginning. From about a week's time I'm facing this issue. Also it is not happening for all the numbers. Only for few numbers the phone is not recognizing the contact. (I have checked the contact and both the name and number are present). When I clock the options and select Use Number and when I select the Call option, the phone recognizes the number and displays the name of the person when calling. However the SMS is not recognizing the number.
Okay I have tried both A2 Uploader and JDFlasher to flash my W995 but it's not working the phone is not recognized at all by the computer.
Every time it enters memory transfer mode I have installed the Gordon's Gate Setup and I make sure of turning the phone off and holding C then the application will search for the phone nothing will happen
Then the application will give up looking for the phone and then the phone enters USB transfer mode.
I have been having this problem for a while, have to get all creative when trying to dump pics n videos from my phone.
What works: I can hook to my wifes laptop and she runs windows 8
I run windows 8.1 and it doesn't recognize. I cannot quite remember if I was having this issue just before going to 8.1...or if it was immediately after.
So I think something on my USB port has malfunctioned... it won't show up in the device manager when I plug it in.I have tried the sticky thread on Diagnosing USB Driver and ADB issues in Windows. I have searched the forums and internet and tried lots of driver installs and restart this and that.
Recently this started when I wanted to flash Android 6.0 to my phone. During the install with NRT after each erase and flash it would say Waiting for device, and the only way I would get it to proceed was to plug the USB and plug it back in... Now running Android 6.0 it won`t even recognize my device and won`t pop up the menu to choose your usb connection setting.I have two Nexus 7, one Nexus 7 (2013), and another Nexus 5... and they all work fine and get recognized by the computer.
I tried many different chargers. Finally got it to charge very slowly by taking out the sim then charging.I don't wanna have to remove my sim every time I want to charge my phone. Galaxy S5.
I have a US TMO 5230, got a "Generic" 32gb MicroSDHC for it. Looks like an Adata or Kingston except for the lack of logo.When I installed it out of the package the phone said the card was corrupted, so I reformatted on PC.Took it out of PC, put it in the phone, phone said the card was unformatted, and gave me the option of formatting it.Ran the phone's formatting option , and the card is not recognized on the phone or the PC.when installed in the phone and I go to "memory" in the filemanager, the cardslot shows as empty, no card in place. when I put the card into the slot on my notebook, it doesn't even recognize the mSDcard.does this mean the card is defective.
Opened email on a Iphone 4G and now phone is not recognized on Itunes and says at first, "activation required" but now it just says connect to Itunes but Itunes does not recognize and it cannot be restored.
I bought a new Macbook Pro and copied over my user account from my old mac using Migration Assistant. When I plug my iPhone 3GS into my old mac, both iTunes and XCode know it's plugged in. When I plug my iPhone 3GS into my new mac, iTunes and XCode have no idea that it is there. No response whatsoever.Is there any sort of plist file I can reset?I would prefer not to erase my iPhone if I can help it.
I have just switched to a new bold and transferred by desktop manager, when I try to log into app world or blackberry protect it is saying my username and password not recognised, I can see the e mail address is .con instead of .com and think this may be the problem when I set up the done with a typo error, can I change this ? I have created a new bb ID but the fine keeps asking for the username associated to the phone, I have tried to change the password on my original login and have the same problem
i have just switch from one cellular provider to another. when i entered my new SIM, i was asked to fill in my blackberry ID password. I did not know it, so i entered this web-site and chose a new one, but it still rejects me. how much time it takes the system to identify my new password, or whether i should do anything to 'tell' my machine that I changed password?
My lg3 phone is not responding to the SIM card in it. I've tried cleaning it and making sure it's in correctly and restarting it with the sim in it. Still not responding to the SIM card.
iphone not recognized by mac,i tried rstarting everything.i tried different cables i tried different iphones and i does recognize them.i have the latest itunes
My iPhone 4 isn't showing up on iTunes for Windows 7. It shows that it's charging, but doesn't show up in devices. I tried the iPhone not recognizing troubleshooting, but it hasn't worked either.
I have always hooked up my iPhone 5 to my Dell PC to transfer pictures onto a folder on my Desktop. Now, all of a sudden, I get a message that says the USB device not recognized. The screen also shows the Generic USB Hub (6 Ports) and one of them says Uknown Device.I went to My Computer and saw the iPhone and attempted to transfer the pictures but it failed. A message said that the iPhone was disconnected meanwhile It is connected in the USB port. I thought maybe a USB port was bad, so I rebooted and switched ports but that didn't work. iTunes won't synch up either. I have over 300 pictures and some videos I took of with my son and wife when we were on vacation. I also tried to upload them to the iCloud but not sure if it worked when I logged on iCloud, I didn't see anything. It was the first time I used iCloud as an option came up to email it which I did, but one of the videos was too long so I had to choose the option to save a portion of it. I hooked it up to my HP Laptop and got the same messages the USB device not recognized. The last photo transfer I did was on 07/08/14 and it worked fine.