I accidently used blackra1n on a 3.0.1 iPhone 3G and it put the phone in recovery mode and that's all the iPhone is doing now... The phone is NOT recognizing that anything is plugged into it now... Before doing this the computer did recognize the phone.Also, the power button is broken.
View 4 Repliesmy iphone 3gs was previously 3.1.2 firmware and i used my brother laptop that already had blackra1n installed so i used it and it looked fine then it just got bricked? it just doesnt turn on and when i plug it in computer it just says its in recovery mode and needs to be recovered.
so i thought i would just recover it to 3.1.3 but i wanted to avoid that step and go straight to 3.1.2 so that i can instantly jailbreak it correctly this time. i search around Internet and find a download for 3.1.2 firmware and i follow the steps and im supposed to do shift+and click restore on itunes and browse the download all looks swell until when it says preparing for recovery and it just comes with the (1600) error code.
I tried to upgrade the iphone to ios 5.1.1 when the download was complete, phone went to recovery mode and the upgrade process failed, the phone never came back to normal mode.
Info:
iPhone 4S, iOS 5.0.1
I'm having a LOT of trouble with my iPhone (5c). A couple of days ago a vertical black line appeared on the right side of my screen. I hadn't dropped it or damaged it in any way, so I was a bit puzzled by it. A friend at work suggested I restored to factory settings to see if that worked (I didn't think it would, but what would be the harm to try?). Everything else was working just fine. Midway through the restore, iTunes says it can't finish because it can't detect my iPhone any longer. Meanwhile, my iPhone is now displaying the "connect to iTunes image". But now, when I plug it in, Windows does not recognize it. Tried with two different PCs, neither is working.Â
I'm currently on a Windows 8.1 PC and using iOS 8.1.1 on my phone. I tried all the stuff on iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support, but there's no way.
Info:
iPhone 5c, iOS 8.1.1
So my problem started yesterday when my phone got wet, not fell on water but water fell on it. I opened it up and dried it up, but when i connected it it wouldnt turn back on. So this morning i tried turning it on and it did.So my problem is that the phone is stuck in recovery mode, before that it just got stuck in the apple logo till i tried restoring it.
Itunes gives me error 6 and sometimes 13.i dont care what i have to do i just want my phone to work, i have att so i dont care about the baseband.
I have iphone 3gs in recovery mode and i wish to kick it out of recovery mode. I tried recboot and ireb but still in recovery mode. Can anyone help me out?
View 24 Replies View RelatedMy iphone5 has gone into recovery mode. It says I must restart my phone, but is there any way I can keep my 3,000 pictures?
View 3 Replies View Relatedmy phone is in recovery mode and iTunes shows error 17
Info:
iPhone 5s, iOS 7.0.4
i'm not able to use Recovery Mode on My HTC ONE M7.
Android System Recovery <3e>
LRX22G Release-Keys
volume up/down to move highlights;
enter button to select.
E:missing bitmap oem_unlock_bg (code -1)
E:missing bitmap oem_unlock_bg_yes (code -1)
E:missing bitmap oem_unlock_bg_no (code -1)
E:missing bitmap icon_ruu (code-1)
write host_mode_success
handle_cota_install: can't mount /sdcard , 1 times
handle_cota_install: can't mount /sdcard , 2 times
handle_cota_install: can't mount /sdcard , 3 times
handle_cota_install: can't mount /sdcard , 4 times
handle_cota_install: can't mount /sdcard , 5 times
My friend's z5 got set password by his friend but he doesn't want to tell my friend....... what should he does?
View 6 Replies View Relatedi was trying to downgrade back to kitkat from lolipop so i flashed a Nk2_kernel.tar.md5 and now my phone will only go to recovery mode and nothing else why is this happening?
View 14 Replies View RelatedTrying to get a new theme on my Tour, but when I plug my phone in it is not recognized by my computer. Anyone have any suggestions?
View 9 Replies View RelatedOkay I have tried both A2 Uploader and JDFlasher to flash my W995 but it's not working the phone is not recognized at all by the computer.
Every time it enters memory transfer mode I have installed the Gordon's Gate Setup and I make sure of turning the phone off and holding C then the application will search for the phone nothing will happen
Then the application will give up looking for the phone and then the phone enters USB transfer mode.
So I think something on my USB port has malfunctioned... it won't show up in the device manager when I plug it in.I have tried the sticky thread on Diagnosing USB Driver and ADB issues in Windows. I have searched the forums and internet and tried lots of driver installs and restart this and that.
Recently this started when I wanted to flash Android 6.0 to my phone. During the install with NRT after each erase and flash it would say Waiting for device, and the only way I would get it to proceed was to plug the USB and plug it back in... Now running Android 6.0 it won`t even recognize my device and won`t pop up the menu to choose your usb connection setting.I have two Nexus 7, one Nexus 7 (2013), and another Nexus 5... and they all work fine and get recognized by the computer.
I tried to use an app on the google play store with positive reviews (app is called (D855) LG G3 AutoRec-Lollipop), after I rooted the phone I used this app and it turned off my phone and now it won't even power up.
View 1 Replies View RelatedMy wife’s HTC One M8 somehow messed up during her attempt to update to Lollipop. How to restore her phone if I provide enough detail about what happened/current state.
The sequence of events is as such. My wife bought her phone brand new in Budapest, Hungary while on her way to where we live now (New Caledonia, South Pacific). She had the phone unlocked there (at the store in Budapest) and it had worked splendidly here for six months. We never altered the phone in anyway – stock operating system, one or two minor OTA updates to get the phone to Android 4.4.2 and Sense to 5.0 or 6.0 (I think it was) but nothing like rooting or flashing another ROM. She was checking daily to see when Lollipop was available and, while I was away on duty travel unfortunately, it was suddenly there. She did the download, told the phone to go ahead and update and that was where things went completely south.
By the time she emailed me to tell me her phone no longer worked, she had tried several things such as Recovery and Factory reset, etc. If the phone is put into Recovery mode (from the Bootloader screen – the one with three android figures at the bottom) it just cycles non stop from the red triangle to white screens and back to the red triangle and the only thing you can do to then phone is press Volume up and Power button to get the “Android System Recovery” screen. I have tried to execute all five of commands on that screen – “apply from sd card”, “apply from phone storage” … “wipe cache partition” but the end result is always the same – just an endless red triangle to white screen non stop until the battery dies.
On the Android system Recovery screen, there is a consistent error message “Mount SDCARD failed 1 times” (and then … failed 2/3/4/5 times), followed by “Can not mount SD Card (No such file or directory). So, to recap, anything I try to do from the Bootloader screen leads to the Red Triangle/white screen cycling which can be interrupted ONLY by Volume Up/Power buttons (not by Volume Down/Power buttons) which gives the Android System Recovery screen and all of those options also lead to the Red Triangle/White screen loop. Also, and probably very importantly, it doesn’t seem that my computer can “see” the HTC when plugged in .. at least it doesn’t show up in the traditional way it used to when plugged in via USB cable.
I bought my xperia z3 Â a few months ago and I decided I want to root it. I got as far as unlocking the bootloader but now that I need to put it into recovery mode I found out I can't. I have tried multiple methods, the power off then power on while pressing the volume bottons and other variations of that. I also tried usind android-sdk the "adb reboot recovery", and it took awhile to figure that out and once i got it to work all it did was reboot the device. It did not go into reovery mode, I don't get an LED light when i power the phone on like most of the guides say I should be getting. I'm getting really frustrated, I've searched far and wide on the internet for a similar problem and all of the instances i have found have been on rooted phones so the fix is easy, this phone has never been rooted, only the bootloader has been unlocked.
View 5 Replies View RelatedI got the S6 Edge from t-mobile (g925st). I believe the OS crashed, the phone won't boot up. If I turn it on it will display the Samsung galaxy s6 edge logo and reboot again. I tried to go into recovery mode but it just reboots itself. The only mode I can go into is download mode.
View 2 Replies View RelatedMy GS5 was working just fine this morning. Out of nowhere I picked up my phone and it was on a black screen with green, white, red, then white again, then grey, blue and red words. It reads as follows;
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
sbli partition doesn't exist
ODIN MODE
PRODUCT NAME: SW-G900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I have tried everything from removing battery, removing SD CARD, SIM CARD, connecting to charger, connecting to USB cable on my laptop, holding volume up, home, and power button. My biggest fear is losing all my data. I have 100's of photos of my 3 month old newborn on my phone memory because I was running low on my SD CARD. I can't fathom losing all her newborn pictures.
I broke my phone during flashing a rom, because the rom was faulty (actually my browser crashed during the download and i tried to install half a rom). And the point is I forgot to make a backup and I had moved my previous backups to my pc, because they were so many, and I thought, i'll make anther before flashing but i forgot. No my phone is broken and has no OS. I however can still access recovery mode. MY question is, is it in any way possible to access my phone from my computer during recovery mode.
View 9 Replies View RelatedI upgraded my Z3 dual using PC companian and I am getting worst of worst battery life which lasts hardly 8 hours with a average 2 hours on screen by using only one sim....Don't recommend me to turn off my mobile data, live wallpaper etc etc...I don't need two days of back up as advertise, I only need atleast one day...
Â
And my question is can I downgrade it to KitKat without rooting my phone??? When I used Sony Emma software to connect my phone with PC it showed that your phone is locked and to enable the functions you have to unlock your phone....
Â
And the other doubt is how can I enter into recovery mode to hard reset my phone??? I tried with a lot of button combinations and all are resulted in normal boot up..And tell me any othere ways to regain my battery back up without downgrading if there is any ( even I don't think so )
So I've had lollipop since the Dev preview was released and I had less bugs on the preview than the final release. After side loading lollipop my phone randomly restarts itself and goes into loop. It gets to the point that when I try to get into recovery mode I can't make it to the restart boot loader screen without my phone constantly restarting.
Eventually it stops after a few minutes or up to a few hours. When this cycle occurs and I plug it into the charger the cycle gets even worse. My phone was unusable for over 5 hours yesterday. I've tried restoring it but no luck. What do I do !?
I just bought a N97 mini and it seems that when it is in power saver mode, the battery went from 4 bars to 0? I was shocked that I couldn't even turn it on in the morning. It's a real bummer when I have to leave the house and I realise my phone died overnight. Is this normal? Is there any way to save energy when I leave the phone in that mode at night? I'm very sure I have turned off all Wifi and Wlan and Bluetooth settings. Also, I believe my wall charger is faulty. There is no white light when plugged in. (Another bummer, when I returned home and realise my phone has not been charging the whole time I was out.) However, when I use the usb on my computer it works just fine.
View 4 Replies View RelatedI have synced the music from my PC's itunes library to my iphone. When I try to do the same with the apps I get a warning that the statistics in the apps/games on my phone will be lost. Can I sync my apps without losing my statistics/levels off of the phone?
Info:
iPhone 4S, iOS 5.1.1
Today i moved my motherboard from iPhone from 1 phone to other and now, the screen is blank. I tryed with 2 differenent LCDs but the screen is blank.iPhone is recognized by iTunes and it does output the sound. But there is no picture. Tryed with HOME+POWER button, but it did not work.Is the problem in motherboard now?
View 7 Replies View RelatedI just received my x2 yesterday. When gmail arrives on the phone, as soon as it appears on my computer it disappears from the phone. Is there a setting i need to change?
View 3 Replies View Relatedi cannot get my computer or i tunes to recognize my iphone
Info:
iPhone 4S, Windows 7
Setting up my new iphone i also connected it to my computer (w7). while synching the computer shut down due to emtpy battery. Problem: now my computer does not recognise the iphone anymore nor does itunes. Yet it still recognises my ipad.
Info:iPhone 4S, iOS 5.1
When I used to connect my HTC One to my PC by USB, it would pop up under 'My Computer' and 'Internal Storage', and I'd be blissfully free to drag and drop pictures and music back and forth between the two.
NOW when I do the same, under 'My Computer' I'm left with an E drive which asks me to insert and disc and a 'HTC One' option that is treated as a camera by the computer and shows me nothing.
My iPhone 4 is not being recognized as a USB device by my computer, therefore I can't synch to iTunes. It is also not being recognized when I plug it into the USB port in my car, so it is something with the phone, not my PC. I have the latest iOS on the phone and everything was working fine until today.
Info:
iPhone 4, iOS 5.1
New iPhone 4S. iTunes won't recognize in XP.
Info:
iPhone 4S, Windows XP
