Google Nexus 5 :: Black Patch On Screen - Visible When Phone Is In Locked State
Sep 22, 2014
I recently bought a Nexus 5 and it has a dark patch on the screen. This is visible only when the phone is in a locked state. Initially i thought it was dust but the patch stayed on. I have attached the image...
Just got my 5.1.1 patch over air and next time I reboot the device, only Google and Android logos greet me, after that only black screen (but OS boots, because I can take screen shots of the black screen. Only option is to press power long and shut the device down. Cache wipe did not work.
So i dropped my phone today, literally no exterior damage whatsoever, the software (from what i can tell) is fine as well. The problem is that everytime i turn on the screen and then unlock it the screen goes black and it's locked up again. I've tried reflashing the sofrware and wiping it clean, the problem persists.
My Nexus 5 screen while plugged in has gone completely black, like it's off.
I've tried holding the power button, holding power+volume up, and power+both volumes.
All that happens is a mini vibrate every 10 seconds or so (like the vibrate that occurs when the word Google normally appears) but absolutely no light on the screen...it remains black.
About a month ago the screen/digitizer was replaced because the thing had a mind of its own, clicking everywhere randomly. Until today it was working flawlessly. Twice today it started lagging, forcing me to power off/power on. That worked both times, but now this has happened.
I have a rooted N5 and im running 6.0 build MRA58K and continue to get prompted to install a security update.My question is, is it safe to install this update, will i lose root or have to reroot? If i "unroot" the system with supersu and then install it after, would that work too? Also i would like to update my kernel to the newest version. Im running blu_spark build #30. Would i just reflash the kernel or do i have to jump through hoops by reflashing the rom first? I dont remember how it works.
I want to receive pop up notifications while my phone is locked. Right now the notifications do arrive when the phone is locked but I have to press the side lock button to view them. I would like them to appear on the screen itself so that i do not have to press the button again and again.
So here is the deal: I have a nexus 5 that fell into water 1 month ago, i did all the procedures, rice + brushed all the circuits with isopropilic alcohol (100%) (oh, it stayed like 2 hours under water!). After doing that amazingly the cell phone was working perfectly, until after one month the screen started going black:
1- turn the cellphone on
2 - everything works fine, i get to the unlock phone screen
3 - while at the unlock phone screen i can see notifications for exemple, turn the cell phone to airplane mode, etc.
4- once i click on a notification or i unlock the screen, the screen goes black. and it happens every time that i unlock the screen
Sometimes i turn the cellphone on and it works normally for a couple of seconds or a couple of minutes and then the problem comes back. First i tought it could be a software problem, so i cleaned the cache, it didn't work. Then i did a factory reset, the problem was still there, so the only guess left for me is that something is malfunctioning because of the water damage. But, it only turns black once i unlock the phone.
So I wanted to get some free hearthstone card back and free packs, which were only given out to people with Samsung Galaxy S6. Apparently there was a way to get this on any device by editing "ro.product.brand" and "ro.product.model" in build.prop.
I did this, restarted my device and got my stuffs pretty easily. After this, I replaced the build.prop with my backup copy and restarted my phone. But, this time the phone is not booting. After google logo, it's stuck with black screen.
So far I have tried clearing cache but didn't work. Also, I tried to use adb to pull the build.prop but unfortunately I get "error:Closed" even though "adb devices" does show up my phone.
I cannot dial or initiate an outgoing call using my Car's Bluetooth system, if the screen is locked. If I try to dial out using my car's system, i.e either using numbers stored in car's speed dial or voice dialing feature. it simply doe not work. But when I look at the phone and unlock the screen, phone starts dialing out.
This totally defeats the purpose of hand free Bluetooth system, in the car. I never has this issue with any other phone, including Nexus 4, Galaxy Nexus and Galaxy S3 or various versions of iphone.
The past week my phone has started not responding and just having a black/blank screen. I can tell it's running, I get notification sounds and stuff, but it just won't respond. I can reset it by holding the power and volume up button, and that seems to fix it for some random amount of time, but eventually the screen will die again.
My Nexus 6 worked for months, but now when the phone is on the screen stays black.
When you start the Nexus 6, the Google logo shows up, the starting animation plays, then the Android text shows.. then the screen goes black. If I hold the power key the "Power Off" dialog opens, I can also take screenshots (of a completely black screen), otherwise nothing shows on the screen.
I took the phone into T-Mobile and they sent me a replacement. After walking through this new phone's setup (adding my Google account, setting up a lock screen) the phone screen went black! Just like the old phone.
Wiping the cache didn't fix anything, but if I factory reset the phone (on either phone), the screen works as it should and goes through the setup process before the screen blacks out again.
I tried not setting a lock screen and the phone still blacks out so I don't think it's lock screen related. I'm starting over again and trying to set the phone up without importing any of my Apps to see if that will change anything.
I've always done system updates when prompted and the phone is not rooted or have custom settings or anything like that.
I just wiped and started over without installing the list of old apps and it still does has this same issue..
Looks almost like a bruise on the screen, only when the screen itself is showing black (i.e., screen is on). I must have dropped the phone at some point... any way to fix this?
-(When i lock my phone or when it locks itself it reboots) fixed -I can't turn on wifi and bluetooth -(Can't copy files to phone) fixed
I tried this [URL] .... but in the step [URL].....
I don't get any problems. I did the second command but it also didn't solve the issue that I can't copy files. I tried resetting to factory settings twice, didn't do anything. I tried putting it in the refrigerator but didn't do anything.
99% sure it's hardware issue, gonna RMA the phone.
Sometimes there is black screen on my Nexus but I know that phone is working. After some time or after clicking on/off switch couple of times display appear. Sometimes it takes several minutes to put the display on.
So, I turned on my phone and now it goes straight to the bootloader. So, when I select "Start" option, screen turns black (can still see backlight shining though). It was sitting there for hours, but screen stayed black.
I did have a rooted phone, but I hadn't tinkered with it for about 6 months.
Recently i got careless and i accidentally cracked my nexus 5 screen after dropping it on the ground
Currently the touch screen works but there is a problem. I am unable to answer calls as the screen goes black and does not turn on again until the person has hung up or until i reset the phone. Also when i try to call out the screen turns black as well and exhibits the same symptoms as listed above.
From people who have had experience with cracked Nexus 5 screens, do you think replacing the digitizer + lcd will fix this issue or did i screw up something big
So I tried to root my 6P with the Nexus Root toolkit , first I unlocked the bootloader, that went well . After that I tried to root it but my build number wasn't there (MDB08L) So I researched if that would be a problem and a couple of people said they followed the same instructions as with the MDB08K build and it worked just fine on theirs so I proceeded.
I selected the "any build" from the options on the toolkit and it seemed to be going well, I followed the instructions , flashed the files on twrp and from there I rebooted and it got stuck on a bootloop... :/ so then I tried to use the toolkit to fix the bootloop and selected the MDB08K and after it ran and finished it isn't exactly bootlooping but it is now stuck on the black Google logo and does nothing ...
I have a big problem with my phone, there are some days my screen had three vertical white line on certain colors, like this : URLs....But with time the problem is worsened, my screen is totally crazy, i can't explain, juste look the video. URLs....This problem is in bootload too: URL....
I have followed the threads showing the various ways to get the driver correct, but this time, my issue is slightly different. The driver shows as Nexus 5. I have uninstalled and let it reinstall. I have checked to be sure the USB debugging is unchecked. When I try the step of Settings-> Storage -> click on the three dots, I only get "Help & Feedback". Both my Nexus 5 and my Windows updated yesterday. Also, I get an error 10 message when I try to reinstall the MTP USP device and the driver remains "Nexus 5".
When trying to answer a call on my Nexus5 and it is locked . It will let me send text messages ( I am driving , etc) but will not let me answer the phone. Insufficient resources go to theme menu and reset. I cannot find a theme menu anywhere. Not in settings, nor elsewhere, any way other than factory reset?
So, I just bought a JB'en iphone 3g tonight.Went ahead and unlocked it using ultrasn0w.Connected it to my mac/itunes, and it asks "an iphone has been previously synced with this computer. setup as a new iphone -or- restore the backup of ***"So, since I had purchased apps using my *** phone (actually was an ipod touch that i got rid of), I'm thinking that I should restore the backup so that I can get my paid apps back for free.
Questions: -will restoring this backup to the new unlocked phone restore it to its original locked state (i.e. will i have to re-jailbreak/unlock)? or will it simply restore preferences, etc...? -otherwise, if i call this phone a new name, is there a way to transfer my purchased apps to the new phone's account?
Switching from a Google Nexus 5, where I used the Photos app (which i think has ties to Google+) solely. I liked because sync was in place and I could easily go on my photos.google.com and see the pictures there too (and share them).
Now it seems that with the Samsung Galaxy S6, the camera app writes to Gallery. I looked under the Application Settings for Photos and Gallery and neither one has Defaults setup, so I am not sure IF there is a way to force the Camera to use Photos, or force their "Messaging" (not Hangouts) to use Photos. It seems that when you use Messaging and identify a Photo manually from Photos, that it wont attach it, since it isnt ALSO in Gallery.
So I installed Google Messenger to test that vs the Samsung Messages. The Google Messenger, cant see the pics in Photos either! wild.
Just got a brand new Nexus 6P yesterday, camera was working fine. Woke up this morning and the camera produces a black screen. Cleared camera data, cache, updated, tried third party apps, then performed a factory reset. All to no avail.
It is still locked I haven't unlocked the bootloader or even rooted the device yet... literally got it yesterday.
A quick Google search says the Nexus 6 does not support HDMI. I will be taking a couple trips out of the country where I am hoping to access live sports on my phone but would like to watch them on a TV of course.
I broke my screen. the phone is still booting up and giving notification sounds and such but the screen is damaged and won't show anything. wondering if i can view the desktop on my pc with windows 7.
Is it possible to have an unrooted, locked custom ROM? I went back to stock from PA and noticed a drop in performance. However, I need to install Good Enterprise, and it can't be rooted for that.