my nokia 3120 shows the error "No valid certificate on phone or sim" or no valid certificate when i am trying to download software from website, so how to avoid this error?
Does the Nokia E6 show the time sent of the message? or just the Time received? This is whenever your turn off then someone sends an SMS. After turning on, what does the time indicate in the message details?
I seem to be having problems with my PC suite not recognizing my E 71 phone. When i first connect the cable to my usb port on my pc i get this error message - connection between pc and phone failed, error code ox80040154 switch mobile off and on again and try again but still gives me the same error message.
Since the launch of Symbian Anna last Thursday, I have been trying to download it via Ovi Suite. My phone shows the update but tells me to download via PC.Ovi Suite shows the new software being available, but everytime I try to download (about 20 times since last week), I get the following; Checking for latest updates . ThenChecking if device support software is up to date...... ThenSomething has gone wrong. There was a problem. Retsart Ovi Suite and start again. Error code 12017.I have uninstalled and re-installed Ovi Suite (V 3.1.1.85) on my PC (Windows 7 64-Bit). When I call Nokia I just get told that their servers are down and to keep trying, however on one of the discussions it states error code 12017 is due to the software not reaching the phone intact.
I am trying to install some apps (eg Opera mini) on my E51. I have made sure that the apps are compatible with E51. When I try to install them, I get an error saying the certificate is expired. I have read some forums and have made sure that under Apps manager/software installation is set to 'All' and online cert check is 'off'. I am still not able to install any of the apps.
I have E71 and E72 with latest firmwares, but when I go to web site using HTTPS, I got certificate warning (not trusted) if the certificate is signed by: "verisign class 3 international server ca - g3" How this can be happened?
I have a Nokia2730c mobile phone. I have tried to download some software (like facebook, uc browser etc) fm ur nokia mobi store (with loging in my registered acct) but result always 'no valid certificate' or 'certificate not on ur sim' nd also ovi store is shown connection failed.
After upgrading the firmware to 071 from 054, my E72 can't read sms if the sms comes from BlackBerry 9780 (Onyx 2). My E72 can receive and read other sms from other devices, but if the sms is sent from BB 9780, it will say error message: "The message format is not supported".I haven't try to soft or hard reset yet since there're a lot of applications on my E72 and I don't have the time to reinstall and resetting all of them.
How can i install valid certificate on my cp nokia 2220?cuz everytime i tried to upload facebook mobile it always appear no valid certificate on phone or sim.
I'm working on rolling my own MDM service, and I'm trying to combine the SCEP and MDM payloads as the MDM protocol document from Apple suggests. I created my own SCEP web service in C# .Net and I know that the device can get a valid certificate when I just send the SCEP payload. However when I also include an MDM payload that points to the SCEP payload's UUID via the IdentityCertificateUUID key, I get the following error, "The enrollment server did not provision a valid identity certificate." This configuration is the one that is sent after the user chooses to install the initial enrollment configuration (step 1 of phase 2 in this diagram).The device doesn't appear to even make an attempt at connecting to my server, and thanks to server side logging I know that it never reaches my SCEP web service page. This seems to indicate that there's something wrong with the certificate I use to sign the payload. I've separately tried signing it with my SSL certificate (from a pre trusted root authority), my customer MDM push certificate (chained from our vendor cert), and my self-signed root certificate authority certificate (created via makecert.exe) that the SCEP service uses to issue new certificates (i.e. device identity certificates).I've looked at the output from the iPCU (iPhone Configuration Utility) when I create a profile with both the MDM and SCEP payloads, and it isn't a valid profile (I've even tried copying it nearly wholesale). However when I install the profile via the iPCU the error doesn't come up and it begins the SCEP enrollment process without issue.A side note - using a preexisting MDM vendor is not an option here.Below is the profile I'm using:
I am not able to change the message storage memory from phone memory to memory card. getting into offline mode and then trying to change, did hard reset of the phone memory etc etc..Still i am not able to get through. earlier I used to get message : Server Busy. Now i dont get that message either. It simply refuses to change to Memory card.
I am getting error messages that the phone memory is full, and I should move data to the SD card. However, as far as I can tell, there is practically nothing on the phone memory. I have no apps installed, everything I can is set to use the SD card, SD card is the default memory.I have a few emails, but nothing in sent items, or deleted items. There are a couple of hundered contacts, but I can't image that uses much.Viewing details using OVI it tells me 3.8MB of 256MB free.The software version is 054.005, and according to OVI that is the latest.I have seen lots of other threads with the same problem, but have not been able to find any solution in the threads. I have tried everything I have read (re-installing the software, rebooting, etc. etc.). Can I view what is in the phone memory (I cannot find a way, only to view what is on the SD card) if I could view it then memory I would know how to free memory up.
I tried installing a new email client and ever since the phone is not booting its giving above error any clues how to install the OS again on E5 I ok with data loss
i use E75. PC suite installed on my laptop with windows 7. i was using the phone as a modem with PC internet access. nowadays i am unable to connect to the net. when i click on pc internet access, it opens the window asking me to press connect. when i press connect, within seconds it shows "no valid connections". what to do?
Ever since I've upgraded my E72 to version 51, phone tends to crash almost every time I turn on WLAN scanning, displaying a System Error message, forcing me to lose all my data, including applications I've paid for.From what I've read here on the forums, I understand that reverting to factory settings might fix this issue, but I don't that I should not be forced to lose everything on my device due to Nokia's incompetence, especially since I have no guarantee that this issue will not show up again.
For the second time in 2 months my E6 gave me a "Connection error" message when trying to make a call. Switching off and then on again appears to have fixed it. "Not the network," says Telenor. I am using 3G and was 325 metres from the mast.
Many people perhaps knows about a popular application named BlueFTP by Medieval. When i try to install it after downloading it from the official website, on my phone, i get an error "certificate not on phone or SIM". However, it works fine if i download it's unofficial built from various forums (e.g mobile9).
I've tried to do a master radio reset it was unable to be done. I tried calling boost mobile to get puk code which i got but mssg stated unable to change pin. i cant for the life of me get the mobile network to come on. I even tried to go to the sprint site and enter my imei and sim card and it said it was suspended or deactivated does anybody have any ideas?
when somebody calls me, phone shows who is calling and everything that it should show ,but when i answer it moves callers name, picture, time and everything that goes with call and it shows on the top of the screen that i have active call but i can not see anything about that call unless i press menu button for multitasking and than change to phone. i had three e71's but i never had this problem. i tried with removing active desktop
Having problems with the E7 caller ID? Randomly the phone doesn't show the callers name, even if he/she is listed on my phonebook. This is not related to duplicate entries, because it works right after phone restart, but fails randomly. The SMS list is also affected, but not all the time. Few times a have seen a call come in and not show the name of the caller. After I have missed that call, I'll go to the missed calls list and there is the name of the caller?!
My E7 sometimes does simply nothing when someone is trying to call me. Doesn´t ring or vibrate or anything. Not even the display changes or shows a missed call after.
I called my phone with another phone and got the normal call connected signal. Outgoing calls are possible but when dialing some numbers it shows a "not allowed" error message...After a restart it works fine again.
Have set up e-mail access on my E72-1 (updated with the latest Sofware and e-mail program) again after trying different methods to correct various imperfections). And now register that the e-mail program simply cuts sentences and words in e-mails I send from my PC. Sometimes the text is not displayed at all.
I send email from Thunderbird (v.17.0, released: November 20, 2012). And I've tried different settings for the format I send e-mails without success. When I send from a hotmail account or gmail account from the internet, there are no problems.