When I receive a call on my BlackBerry Torch 9800, the Bluetooth connection with my car (Mercedes E class) sometimes crashes and I end up fiddling with the phone to try to retrieve the call. It only does this sometimes and the connection was perfectly OK with other phones. Making calls and downloading the address book all work fine.
Bluetooth connects but whe trying to make a call or answering a call, the bluetooth keeps making a noise and disconnects. Reset buetooth but still don't work. battery is fully charged.
I cannot get a Bluetooth driver for my Torch 9800 so I can pair up with Windows 7. Windows says device driver missing, and I can't find one on the internet...
When I try to connect, it connect after enterying passkey, but when the PC is trying to find driver, it ask for a disk for driver, but I can't find it.
I was configuring bluetooth connection between my laptop and Torch 9800 and windows automatically configured my Torch as bluetooth modem and now I can use my Torch as a modem over bluetooth for internet access. This is a welcomed surprise as I was contemplating whether or not to spend 20 plus dollars to buy the tethered application but apparently there is this free option. This is probably not new to BB experts but I was so happy about this "new discovery" that I thought of sharing.
My fone has no option to send via bluetooth. Can send to facebook whats app etc., no option to send via bluetooth. My battery dies within 3 hours. I bought a new battery thinking it was the battery fault now I am sure its the phone.
I know there are separate posts on this subject on connection consistency problems but I can't seem to get an answer to a fundamental question. Is the problem hardware or software related? Since turning off WiFi improves the connection consistency significantly what does that imply? I want to return my Torch of this is a hardware issue.
Since the last update, my phone disconnects from my car bluetooth after everycall. Â When i get in the car it connects as it should but after a call is received or made it disconnects? Â As i mentioned it worked before the last update.
I just got a Blueant V1 bluetooth headset and everytime the milestone sleeps [screen auto goes off] my bluetooth will disconnect shortly after that. If I keep the screen on the connection seems fine. I don't see a setting that causes bluetooth to go off when on sleep like WIFI does so what's the problem here and how can I fix it?
iphone 5 ios 7.1.2 bluetooth disconnects from headset when receiving or making a call. Happens on multiple headsets. Tried turning bluetooth off and on, re pairing, phone reset with no improvement. Any way to revert to previous ios version?
I just upgrades from a Curve 8330 to the Storm 2 9550. I paired it with my car and it constantly connects then dis connects with the factory hands free. This makes it difficult to answer calls and I drop calls in the middle. The curve worked fine with my car so it's not the car.
My Droil Pro last week worked fine with Sync and Blue Tooth. Then it started to disconnect. After connecting to Sync, in a about 15 seconds it will suddenly disconnect from Sync The Blue Tooth is still connected and it will stream music from my phone to Sync with no problems but the phone will not stay connected.
I am having problems with random and frequent disconnects with the Atrix 4G when on Bluetooth while connected in a car. Initially my setup was using a Motorola Roadster and while playing audio I would randomly not get sound, then shortly after I would get the message that the phone was no longer connected to the Roadster.Usually it would eventually reconnect, sometimes almost immediately after. This would happen sometimes as often as every few minutes, while other times it could play a half hour or more before encountering the problem.
Initially I was unsure whether it was the Atrix itself or the Roadster, but after having recently purchased a Ford F-150 with SYNC bluetooth connect, I am encountering the exact same behavior with random disconnects. Unfortunately with the Ford SYNC, I never get it to automatically reconnect, and I must go into the phone, turn bluetooth off and back on, then manually reconnect from the phone.Most of the time I have the Atrix connected through the Motorola Car Dock, but I think the same behavior has occurred out of the dock.I have never noticed this same behavior with other bluetooth devices I have - Jawbone Icon, Monster iClarity speaker. I don't know if I have enough data to tell definitively or not, but I think I have only observed this when the auto was in motion.
I'm having trouble with the phone disconnecting from the car once the phone has docked. The signal bars gradually fall away and the car asks if you want to re-connect. The manufacturers information (jaguar) states that the phone is compatible, but gives the version as 2.1. My phone is running 2.2.2, after updating a couple of months ago. My old Nokia 6300 connects every time and I can upload the contacts to the car's display.
I'm using Xperia Play & having disconnection problems with BOTH Sony Ericsson HBH-DS220 & MW600. Initially I thought it was HBH-DS220 not playing nice with Android, so I bought MW600 Last Saturday, but sadly Problem persists.Problem Description: Simply put, I'd be lucky to finish a phone call over the bluetooth headset without it dropping connection. The MW600 would still display the telephone number, while in fact no sound is coming or going through, and then it takes a few seconds for the "Bluetooth" toggle button on the phone call UI to disappear. Whenever that happens, I'll have to frantically yank off the earbud, take out the phone, and start appologising to the other person for missing the last few seconds of conversation.It would also sometimes lose connection when I'm playing games, the sound would stop coming in from the game, then the game will freeze for a second or two, and suddenly the sound would start coming out from the the built in loud speakers and give everyboy else a heart attack.i'm using stock firmware, never rooted/unlocked:
Model number: R800i Kernel: 2.6.32.9-perf SEMCUser@SEMChost #1 Build Number: 4.0.2.A.0.58
EDIT: On another note, after posting this, I found I have put my email as the displayed username... (I already have an account over at blog.sonymobile, and over there, username means email address. So I put my email address when I log on here, the button says something like "create account"... yes, its a bit weird, yet plausible since I was thinking you're confirming my email before proceeding onto anothe create account screen. There was no warning THAT username is the one going to be displayed.)
I know this has been working before, and I really need to connect my iPad via Bluetooth to my iPhone so that I can then use the Wireless via my iPhone. Unfortunately, every time I connect to the iPhone via Bluetooth the WiFi on the iPhone disconnects.
I'm loving my lumia 800, but this bluetooth problem is driving me crazy! The handset pairs fine with the head unit in my c class Merc, I can make and receive calls and text messages, but it continually disconnect the bluetooth as though the phone is powering bluetooth off and then powering it back up and reconnecting. This sometimes happens every 30-40 seconds other days it can be ever 3-5 minutes. The head unit works fine with my blackberry, htc desire and a mates iphone so I know that's not at fault. I've tried deleting the pairing and restoring my phone prior to the update but all to no avail.
I read one discussion that was discussing the problem of the bt EF isconnecting/connecting when a call ended. The problem I am experiencing is the same, except my EF is doing this during calls. Any idea what can be done to resolve this?
As an avid business crackberry fan (and business manager) for over 3 years, I was appalled to find that I would need to slide the keyboard out to enter my security code, especially when I would do it 50-100 times per day. As every other touchscreen phone on the market has a pattern unlock method, this is the single issue preventing from purchasing this phone(s) PLEASE ISSUE AN UPDATE/APP/PATCH anything to bring this vital security & efficiency issue up to par.
I have already installed the new Desktop Manager 6.0 that I downloaded from the RIM site.
I am thinking the safest way to not have a problem is the just restore my 9800 data from a back up rather than do the Switch Device thing. Anyone worried it might bring erroneous crap into the new 6.0 OS.
Maybe it would be better to redo my settings after the data install to make sure all is clean and working correctly. Some of the 5.0 setting would not be applicable to the new 6.0 software.
i had a blackberry torch 9800 which i backed up to the blackberry desktop then it was sent away for a repair and they replaced it with anew 9800 i have tried to recover everything from the desktop but it says i need the old blackberry first?
On other BB's I've moved pictures from the device to the media card using the "move" function - I can't find this on the Torch. Am I overlooking something or will I have to use Desktop Manager?
does anyone no how to transfer all my contact from my Tour which is cdma with no sim card to my new Torch with sim card. i cant do it using blackberry desktop software.