BB Curve :: Make A Call And The Speaker Keeps Flicking To Headset?
Dec 20, 2011
I have a curve 8520, it is nearly two years old, I went to make a call and the speaker keeps flicking to headset and back, I have never connected a headset so it cannot be the settings, has anyone else had this problem if so what was the remedy to put it right.
I am using an iPhone 6 Plus (magnificent device) and a Sony MDR-10RBT headset (another killer). But when an incoming call comes, why does not the phone ring? i can hear only from the bluetooth headset speaker. When I was using this very headset with my earlier phone the iPhone 4S, I could hear the incoming call on both the phone ringer and the headset.
Have a Atrix HD, about 6 months old. Today I went to make a call using a headset plugged into the headset jack, and nothing happened. The headset was not recgonized and all sound continued to come out the 'speaker'. (Either in "loud" speaker mode, or normal mode.) Tried another headset, same problem. Researched and went through the "check for debris and clean the jack" process with no improvement. Contacted Motorola support and they ended up offering to have it shipped to service center for repair/replace, but that means 7+ days without the phone. So I thought I'd check and see if anyone else has had such a problem.
Anyone else ever have headset jack "failure" like this on an Atrix unit? Oh, it also fails with a music player, or any other sound source, so it appears to be a general unit failure, not specific to any one app/function. I looked all over for some kind of setting to enable/disable the jack, but found nothing of use.
I can only periodically make calls normally by placing call and then putting phone up to my head and listening to phone ring, and person answer.For whatever reason then the phone will behave erattically. It will only let me make a call using speakerphone.I cannot put phone up to my head and listen through earpiece, and the phone doesn't black out when putting up to my head.I guess the proximity sensor doesn't work or is buggy.Also, sometimes when I double tap on the Home button/key to start voice dialing I should be able to hear the phone ask me what I want to do, but I can't hear anything but I can see on the screen that It is asking me a question - but can't hear anything as I normally should.Then, a few hours later it all works beautifully.I have rebooted the phone, taken out the battery and put it back in, hard reset the phone.I even have just now taken my screen protector off and the phone worked for a few calls as it normally should - i put phone up to my ear and screen blacked out and I could hear other person on earpiece.Then about an hour later none of that worked.I could only use the speaker phone.the phone didn't black out when making a call and putting phone up to my ear, and the double tap home button/key invoked the voice dial interface but i couldn't hear the voice/phone prompt like normal. and confirmation of my commands
The level 2 tech support at moto didn't help with any more troubleshooting than what I have already done.Which is: restart phone...reset phone to factory settings (hard reset) wipe all data off phone...taken off screen protector...none of this worked and produced consistent results to say that any of these procedures produced a positive change in the phone.I am within my 30 day trial period of this phone purchased from Motorola.
I bought bold 9790 four months back during June'12. When i make a call, handset speaker is not working and i am not able to listen to the caller when it is in handset mode. When i opt for speaker mode, i can listen to the caller. Is there any option which would've got changed by mistake OR is it speaker related problem.
I have a weird problem with my new Blackberry.When I answer an incoming call, it is put on the speaker for a very short time (two-three seconds), and then back to normal.Very annoying.It will no doubt be my fault, as I have been playing with the settings but I cannot find how to solve the problem
I have problems with speakers and headset. Even at highest level it's sometimes hard to hear. For example GPS indications in the car. But also with Headset, if people are talking nearby I can't even hear the music!Is there some kind of security switch?
I have currently installed GB (generic) on my X10 which is rooted and have xRecovery installed. Last weekend I installed the "Stutter Fix" and it solved a few problems I had and I love it! The problem now though is that when the phone rings or a notification comes (SMS, email etc), if I have the headset plugged in, no sound comes out of the phone's speaker. It only comes out of the headset and that wasnt the case before. When the headset is not pluged in the speaker works fine, so there is no harware issue or anything like that. I have the headset pluged in 90% of the time so I really need this feature. I looked at the settings and such but I didnt find anything that could change that and put it back as it was. I dont want to flash a new ROM again.
I know this may sound silly, but how do I turn on the screen when talking through the headset or using speakers.It's just the screen goes black after a few seconds after turning on the speakers or plugging in the headset, then I'd like to use the phone, but I just cannot turn it on. Only way it to use the power button, but that disconnects the call.
i've been using my iphone 4s for 3 months now and i don't have any problem in these 3 months. now the headset speaker is very low, whenever i spoke to somebody i turned on the loudspeaker, sound is there but it's too low, this happens after upgrading to a new software IOS 5.1.!
I have had my Storm 2 for 5 months and it has performed flawlessly. Yesterday I plugged in the earbuds that came with the device for the very first time. Immediately after removing them the device began switching between headset and speaker mode. If playing music, it switches to headset mode for just a second or two then back to speaker and the music is paused. It does exactly what happens when you actually plug the headset in and then remove it; the headset icon and volume meter appear for a moment along with the system beep, then it returns to speaker with the music paused. I have wiped the device, blown compressed air into the headphone jack, removed the headset while music was playing, and repeatedly plugged the headset jack in and out with no resolution. The Verizon Wireless Knowledge Base has no information on this problem.
I have a 9700 Bold with ATT and the OS is v5.0.0.405. Alright so a couple of weeks ago my blackberry has started developing an annoying problem. When in a call, most of the time (not all) it starts switching between the headset icon and the normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so i cant hear anyone and they cant hear me. I'm out of my 30 day warranty from ATT but i think im still well within the RIM warranty. I have admittidly dropped it, but this still shouldnt be happening. Nothing like this has happened to any other phone I have owned. Is there anything i can do to get some sort of replacement?
When I have my headphones plugged in, the music plays both in them and still comes out from the phone. This also happens with conversations... When my headphones are plugged in, the sound from the other person speaking comes out loudly from the phone, so everyone can hear it! This does not happen when the headphones are not connected. Then the sound just comes from the phone, and conversations are more quiet.
I have tried different headsets, earplugs and speakers, the problem is the same with all of them. I have tried looking at the settings, both on my phone and other applications. I have also googled it, and I have tried to restart my phone. And I have checked if they really are inserted correctly. What I can do? I just want to hear my music in piece and keep my conversations for myself.
I also checked this link: [URL] .... but it did not solve my problem ...
I was able to update my 16GB 3GS to iOS4 without a hitch, that is until I paired it up with my Contour Design SurfaceSound Compact Bluetooth handsfree car kit. Upon syncing the device would confirm pairing to the phone by announcing "handset connected". However, after updating to iOS4 the device would continually announce "handset connected" every minute or so (quite annoying). I've tried unpairing it to my iPhone and then repairing it but the problem continued.
However, I did find a workaround to this problem. I noticed that if I left my iPhone on the Bluetooth screen (within the Settings), the pairing takes place but it doesn't force my car kit from announcing "handset connected" every minute. Aside from not being able to switch to another screen or application, pressing the power button (turn off the display) will bring this "bug" back.
At least the iPod functions still work and I can take incoming phone calls...hopefully Apple fixes this annoyance soon.
Since I performed the last software update a couple of days ago I can only hear calls through the speaker or through the plugged in headset. I've tried resetting but the problem persists.
I have a BlackBerry Curve 9300 3G and my Service Provider is O2. When I first got the phone, I had only topped it up 10GBP which meant I didn't have the BlackBerry internet (data) service/pack. My phone could still send & recieve incoming calls and texts but now that I have topped up again 15GBP (the amount at which I can get the Data pack), The top bar has just been saying : 'Searching for Network. even though it was working before. Now I cannot recieve or send a call or even text. The 3G doesn't work but the WiFi does. The Line with the upside-down triangle on it has an 'x' next to it.
I just bought a blackberry curve 9300. I wonder why I can't make a call thru my phone. I can only hear a message saying "your call cannot be connected, please check your phone settings". However, I can receive phone calls. I can also send and receive SMS messages.
Since the update my when I connect to my BT Voyager Pro+ the phone still rings through the speaker. Is there a setting for the phone to mute the speaker when it's connected to the headset?
For some unknown reason, I cannot receive calls and smses as well as make calls and send smses. When I try it keeps saying call failed. When I check for airtime SUPPLEMENTARY SERVICE ERROR - GENERAL ERROR. I have put my sim card into another. Phone and was able to make n receive calls and smses. But when I put my sim into my blackberry I am not allowed to. My blackberry is vodafone I am currently using a cellc sim card in it. The phone has worked fine from the time I bought it in december 2011 till september 2012.
My blackberry has stopped working. When I ring someone it doesn't ring their end but on my phone it says connected and when people ring me they can hear me but I can hear them. I have done a voice recording and played it back and it worked I can still receive bums and texts.
If one were to listen to FM radio on one's Bionic (assuming this is legal. If it is against the rules, then note I would surely never do that!)....how do you plug in your earphones (needed as antenna) AND listen on the regular Bionic speakers? Is there a setting for this, or is it impossible to do?
I recently updated this phone with the 5.0 version via desktop. Installation was successful, kind of. Sending and receiving text, internet, media, etc. all work fine. But whenever I make a call this phone goes off, the little red light blinks and then blackberry logo appears above a loading/buffering bar. Before the update placing calls went on without a hitch.
I am getting a tinging echo type noise when I make or receive calls. You can hear everything fine but it keeps making a funny noise during the calls and is very annoying.
I've been having trouble with my phone. I just got my Bold 9700 two days ago, and I've decided to tweak it a little. Once I connected my phone into my computer via. USB, two autoplay windows (as usual) popped up, one for my SD Card, and one for my Device itself, then Blackberry Desktop Manager popped up, then it froze. I force quit it and closed the program, then upon removing my phone (by ripping it out aside from Safely Removing it) from the USB then connecting it again, my Device Storage did not autoplay, and it did not show up as a device when I opened "My Computer", but my SD Card Storage shows up. I'm using OS 6 (6.0.0.723, Platform 6.6.0.248). I've tried the calfix thing, but I don't think it applies to my phone, as it's PID_8004.
I bought an unlocked Blackberry Curve off of eBay, put my AT&T SIM card in it, and it worked great for about two weeks. Then I ignorantly downloaded a "free theme" and about a week after this, my Blackberry started freezing whenever I would go to make a phone call, the screen just goes black and it freezes until the hourglass comes up and the phone turns back on in about two minutes. Also, if someone tries to call me, my phone will do the exact same thing and they will go straight to voicemail. I have removed all the applications from my phone and done my best to wipe the entire system, but it still freezes whenever I try to make phone calls. It has pretty much stopped freezing at any other times besides when I am attempting to make phonecalls now so there is a slight improvement. Is there any way I can redownload the operating software (even though the phone is unlocked) or what else would be advised that I do?
Lets say I'm on a call and someone texts me or emails me.. Is there a way to get the text message or email to make a sound while the call is in progress? And if so, how do I activate it?