buttons D 2 side buttons of BB Curve 8520 have come off. I enquired about a new cover and was shocked to find that it cost Rs. 330, more than 1/3rd d price of a new Curve 8520. I have read on various forums that a lot ppl have faced d same issue and that its a manufacturing defect.
Okay, Blackberry Curve 8350 Sprint and uh, it's black.I just got it in the mail and activated it today, but, I can't get my volume buttons on the side to change the volume.But, when it's in sleep mode, it lights up if I press the volume buttons, but, it doesn't actually change the volume.
the keyboard and buttons on the side and top on my 8900 simply stopped working, in that they will no longer activate the phone even though I know the phone to be on.The phone is a PAYG handset on Orange, whom I have contacted and was told that because the unit is over 12 months old (18months) I must contact Blackberry. There are unfortunately no support telephone numbers apparent on the site, so this seems to be my only option! This is incredibly annoying as I need to use the phone on a daily basis for email, etc!
I have an Blackberry Curve 8520 and I would like to know that my phone left portion of the screen got white lines and then slowly half of the screen has gone white. I bought this phone on march 2011. So phone is under warranty and what should be done?
On my blackberry 8330 i had the icons where the weree on left side from top to bottom also on my 8330 in the menu were everything else was my instant messengers were just in there on my 8530 they are in a folder called instant messengers how do i take em out of there?
So I've had my Blackberry Curve 8520 since around October 2010 so my warranty has run out a long time ago. Basically, the problem is that every single button on the phone does not work. When I say every single button I mean keyboard, the green and red phone button, the back button, the menu button, the audio, camera and side buttons, the music control buttons, literally just every single button. I doubt it is water damage because this happened back in March or so and I just gave up trying to fix it and I tried it again today to see if maybe it finally got dry after a few months. Is it possible for the buttons to just stop working? Before all the buttons broke, I had problems with the O button. It was sometimes working and sometimes not working, then every button just broke. Also when all the buttons were broken, I was sometimes able to just button spam and it would work for a few seconds then just not work again.
So, today I pulled out my phone and the screen was black. I took out the battery, put it back in and the LED just kept blinking. I pulled the battery out again and left it for a bit. It turned on, when it turned on my phone was locked. I couldn't press any buttons. No matter what it was, the four buttons on the top row, the trackpad or any of the keys weren't working. My phone still turns on normally but none of the buttons work.
Just updated my BB desk top manager with the update version 5.0..1. Now I am not able to use the left side convenience key button to lock the keyboard. Just curious to see if anyone else has had the problem and if so, how did you fix it.
I have an old Curve 8520 which I only just recently updated to OS 5. Like the title says, my device "locks up" after a while of not pressing any buttons, even when I'm using the scroll pad. The thing is, I would still be able to scroll around the screen with the scroll pad but will not be able to select anything or type any letters. The phone doesn't totally freeze though as I can "unlock" it by pressing and holding the power button for about a second in which case it goes to the home screen and interrupts whatever I was doing.
I dust discovered pressing and holding ANY button "unlocks" the phone.
I've tried removing the battery and this doesnt work, there is no water damage, when the phone just turns on I could move with the trackpad but I cannot click Ok on the message. None of the buttons work.
My recently purchased Iphone 5 works great with one annoying issue. The volume buttons on the side are reversed. The button with the minus sign increases the volume and is directly underneath the mute toggle. The button with the plus sing decreases the volume.Â
Was wondering if anyone else had this problem and how they fixed it. I had my phone in my pocket today for about 30 minutes and when I went to take it out none of the buttons were responsive the only thing that worked was the track pad. I tried pulling the battery and restarting but still the same outcome only the trackpad was functional. I have the blackberry 8530.
Battery in my bb expanded by charging and two buttons on side popped off. I got the phone by contract from T-mobile. They want me to pay for the repairing even though the phone is still in the guaranty time. There is no Blackberry or RIM agent in Czech republic, what should I do now?
when I unlock my phone I have to press the * key and the green cann button, I was wondering if there's a way to change it so I can press the mute button ontop of my phone to lock and unlock it, I know it sounds weird but I'm used to doing it that way on my old phones.
I am new to BB and am learning my way through it. Hopefully this is just a setting, but there are 3 buttons on the right side of the phone. The one near the bottom is for the camera, and there are a couple above that that the user guide says are the volume buttons. When I press the them to increase or drecrease the volume, nothing happens.
I have reset all settings. Sometimes when I press the volume up button the ringer symbol shows up. When I double tap the home button a slide to the left the volume is completely none. I cannot slide or use the buttons to change.
my blackberry curve usually works perfectly fine but in this last week its been crashing a lot.. & for hours on end! The only thing I can do is scroll, I can't press the trackpad in, use the keyboard, or any other buttons just scroll.
Every once in a while the lock key and camera buttons all stop working, they just don't do anything. After a time they all start working again. I've taken the phone in for repair twice, but I suppose with it being an intermittent problem they've had trouble tracking down what's going on. Anyone any ideas why this is happening? Is it a software problem as it happens to buttons on both sides at the same time?
My volume buttons on the side recently quit working and it won't let me turn the ringer up and my keyboard doesn't click and my home screen doesn't click
I've bought my 5800 XM yesterday. Today I was playing some music and noticed that the sidevolume buttons don't work when keypad is locked! It's very difficult to take out the phone from your pocket and then adjust the volume or change the track unless you have put on the handsfree. Please let me know if there is any fix for this.
I have had the Bold 9700 since like the end of May 2010. This is actually my 2nd one because the first one I got was defective (the 3/R button didn't work)..so I got a new Bold 9700 via DOA. Two days ago, I noticed that my phone would restart when i press the two volume buttons at the same time. If I press one of them, it still works perfectly. However, I use a case so sometimes I accidentally hit the two volume buttons together and my phone reboots.I'm not too sure if this problem just started to occur like recently because I never noticed if I ever hit the volume keys together at the same times before. I don't think it's a software problem but I'm running on the original Rogers OS 5.0.0.351. I never bothered to upgrade because .351 seems to work pretty well already.
All of a sudden I have a problem with the volume on my phone. I know it isn't a problem with the speakers as all my videos play normally with sounds, and when I try to change the ringtone, it plays. However, I cannot adjust the volume using the volume buttons on the side, and the silence switch doesn't work...when I press any of them, there is no on screen confirmation of a change. The ohphone also doesn't play any noise when I have an incoming call or text. But I like I said, I can play videos with sound, I can go to settings and sound and hear the ringtones. I have reset, and restored the phone but nothing has made any difference.
the option to have the side buttons control screen rotation is Massively Useful. It would be so much easier to do that as a shortcut, rather than having to go to settings etc every time to turn it on and then back again to turn rotation off.requently I want the screen to rotate for just a couple of images, and then flip it back to static. We can make this happen
I've had this problem for a while and now I'm getting work I don't want to miss my phone because I've put it on dead mode. Before I factory reset my phone, I was able to change my volume using the side buttons to go from different levels of sound, then vibrate only, then dead mode (complete silent and no vibrations). Now I only have different levels of sound and dead mode. I read about changing an option in sounds to vibrate only in silent mode, which will fix this but I can't find that either (my suspicians are that this option was taken out in ICS or moved to a secret location to foil my plans).
I took this shot after updating both my iPhone 4 and iPad with the latest SW releases today... If the signal bar cacluation Apple is recommending is appropriate for the iPhone, why not the iPad 3g as well?...and which is correct?