BB Bold 9700 :: Application Loader Stalled During Upgrade
Mar 4, 2010
Downloaded and installed latest OS for my 9700.On the very last stage "Restore Device Data", my loader stalled and I'm afraid may not complete. Any information on how I can protect my data and the phone's data and how I can restart the loader?
I am trying to upgrade my OS through DM. I went to click upgrade after connecting my 9700, and it pops up "application uploader needs to be upgraded." I tried installing it as it advised, 5 times already and it still pops up the same message. I tried uninstalling and installing DM again with the latest version but it is still happening. Any clues on how to fix this?
Your BlackBerry Application Loader needs to be updated before your can continue. Do you want to update now? [Yes / No]
When I click YES, the Desktop Managers starts to download the Application Loader update. Then I am instructed to close the Desktop Manager so the setup can continue. After the setup is complete, the Desktop Manager starts on its own again and directly tries to open Application Loader. And OOPPS !! it tells you again that it needs to be updated !!! I kept doing that for over 5 times! and I am still getting this wierd messages !
Here are some usefully details:
Device: BlackBerry 9700 OS: OS 5 Desktop Manager: 5.0.1 Windows: Windows 7 Ultimate
I'm trying to update my BB bold 9700 to 6.0 bundle 1879 (v6.0.0.448 platform 6.6.0.124), when it reaches the modules backup 156 of 660 it says: Application Loader was unable to backup data on your device.
So last week or so, my phone took a bit of a swim. I did the usual, put it in rice and let it dry out. Then I turned it on to find it continously rebooting itself. Seeing as how I had no idea what was happening, I brought it to a shop to get it fixed. A week later I got it back and basically it was doing the same thing, only at the end of the reboot cycle the white screen would come up, then repeat. I googled this and saw that my blackberry was "nuked." There was an issue though; my phone had been totally wiped of handheld software. So I redownloaded it, then followed the steps to repairing it. But it would always stop at the second step saying "application loader was unable to connect to the device" when reconnecting to the jvc. Is there anything I can do or is my phone totally done?
Desktop Software V6 application loader for new software for Bold 9000 won't allow the "apply" button to be clicked. Says "exceeded available storage" (124.5 mb), which is unchaged even after I deleted several large apps from the BB and rebooted. How do I get the application loader to work?
I just updated my BB 9700 for the first time (511 updates to be exact). The upgrade is currently at 11 out of 12 upgrades and it is taking about 45 minutes to initialize before it gives me the message: "The desktop loader is unable to connect to the device, you may need to enter a password on the device."
The BB is not asking for password and I do not have any password protection on it. I have unplugged the USB from computer and the phone, reconnected and clicked retry and it continues to give me the same message 45 minutes later. I am freaking out a bit because it cleared all my contacts off and I believe the process it is trying to do is to restore that information.
I am trying to upgrade to 5.0 os and I downloaded the .419 from MTS and I downloaded the .419 and its recognizing old os such as 4.7 os, why isn't it recoginizing my 5.0 .419 os? It wont let me put on the new os it doesnt recognize it in the app loader.
When I start the "BlackBerry® Desktop Manager" the "BlackBerry® Application Loader" is run automatically. It's a problem if my PC is not connected to INTERNET, since I can't stop it clicking on "Cancel" and the "BlackBerry® Desktop Manager" become hanged. Therefore, I can't use my device as an External Modem.
It is happening since I updated the "BlackBerry® Desktop Manager" to Version 5.0.1.37.I want to configure the "BlackBerry® Desktop Manager" to ask me if I want to run the "BlackBerry® Application Loader", in a manual way. But I have not found how to do it.
when i plug my blackberry torch on the computer, the DM recognize it but when i go in the application section it starts loading (verifying all the stuff)but then the application loader appears to crash an i get message saying "Handheld Application Loader Wizard has stopped working" and i really dont know what to do.
i am having a problem whuile operating the blackberry desktop manager after connecting my handheld. it says "handheld application loader wizard has encountered a problem and needs to close.we are sorry for the inconvenience". im unable 2 do anything on my device except take a back-up.
I have been trying for a VERY long time to download an operating system. Every time the Application Loader Wizard does not detect the blackberry. It also does not let me check the box to detect it automatically. The Blackberry Desktop Manager recognizes the BB and its pin but the app loader wizard does not.
I've got a clean (wiped to factory reset) BB8800, with a first time installation of BB Desktop Manager on a new PC. The BBDM is 5.0.1.16. Everything is uncluttered with previous detritus.
However, when I connect the BB to the Desktop Manager, it asks me to update the Application Loader. I follow the instructions: OK to upgrade Disconnect BB Click OK to close BBDM Closes Desktop Manager, Downloads 16Mb file Goes to MS Installer Verifies the files Installs the files It reopens the Desktop Manager Then lo and behold, it asks me to UPDATE THE APPLICATION LOADER!!!
I'm on Application Loader 5.0.1.52. Is there any chance of downloading the newer Application Loader directly because everytime I go through the loop, it's downloading the installer files, and I can't find it in the cache.
Just for ref the BBDM components: BBDM 5.0.1.16 DDDevMngr 4.1.0.14 RIM USB Driver 4.1.0.4 RIM Serial USB Driver 2.2.0.3 Application loader 5.0.1.52 RIMProgram 1.0.0.3
My computer keeps saying "Application loader was unable to connect with your device. Please reconnect your device, enter the password, if required, and click retry." when I try to update the phone. The issue before was that the phone kept shutting off and would get stuck on the display loading bar everytime. I went to the AT&T store in town and they told me I needed to update it. I tried that and now it won't even turn on. The red light flashes a few times and then it stops and gives me the above message. What should I do?
my blackberry not booting, it show red led indicator and no life.trying udpating os but it come to the stage reconnecting jvm and message appears "application loader could not connect to your device. Please reconnect your device, enter password if required, and click retry".
OK, I've been reading here for a while but I'm still not really "geeked up" with all the things BlackBerry. I've been reading about the new OS coming tomorrow, and many are suggesting using App Loader to upgrade. App Loader is what? How is it different from DM, and why do I need one/it?
I am upgrade my bb8520 using bd program , but until reconnecting to jvm it come up application loader was unable connect with your device . reconect your device , enter the password , if required , and click retry . but the phone is running at the half way .
1 - Not all n900 applications i find on the net are searchable or listed at all on the n900s built in application downloader. some files i download manually off the net are in gz and deb format. do i need to install the nokia pc software and transfer them to the phone in order to use them, as i cannot find any other way to do it? from using google there are an awful lot of users saying the nokia software does not work very well at the moment and to avoid using it until its fully adapted for the n900, as some features are supposedly unusable?
2 - is there an easy file unzip program for the n900, hopefully easily found within the n900s application downloader? i tried searching for 'zip' and 'unzip' but nothing crops up
I recently upgraded to a 9860 but when I sync to my desktop, i am getting an error message that says" Application Loader Wizard requires blackberry device manager to be installed. Contact customer support"
something is killing my bb battery , it hardly lasts for 8 idle hrs and the same battery on another bb will last for around 2 days if not used too much , I had initially installed quite a few apps and thought maybe this was the reason for the weak battery , so i deleted all the apps and still the same . I dont have any apps other than the normal ones running in the background.
another thing is that my bb keeps hanging , esp while locking and unlocking Its like there is a bug or a virus on the bb I also dont see the name of the person calling when the phone is in the holster but when it is out it shows .....
Cant run/install any application except msn chat. why is that? whenever i try to install (clicking the shortcut on the incoming email from bb) i am getting an error message saying that my bb 9700 is not suitable etc. why is that?
Whenever I restart my phone, the screen has an error message that says there is an error with application (54) and it could not run, how do I know what application (54) is to remove it?
mine has around 120mb free wheb purchased new. is this about right. i thought it had twice that? i assume the system takes a bit of it? but then i saw a Internet video and the guys bb is loaded with apps and still got 130mb free. search in Internet "blackberry 9700(onyx) over review". why is that? makes me wonder. is it cuz his is a tester model?
I keep hearing that you can use the Bold as modem for your desktop. The T Mobile said that I need to download the App but I don't know where to get it.
Am trying to install new facebook application (1.8.0.49) and after i choose the language ( American English) i receive this error { This application requires the following modules,which are not installed: net_rim_bb_universalsearch_lib net_rim_bbapi_unifiedsearch am using blackberry 9700 v5.0.0.442 cryptographic kernel v3.8.5.85 branding version 1.0.88.606L
The app. doen't recognize my blackberry 9700.Also when I connect to the USB only the first time the desktop opens if I try again it will not open untill I reboot the computer.