I have the .464, and everything was smooth, i have 35mb memory after rebooting, and the only apps i have is berryweather...today i havent done anything on the phone but he started to reboot himself...one time he reboot himself continuasly 4 times !is this normal?now after recivieng an email he did a reboot again....what can i do ?
When I put my bold on charge it almost instantly reboots itself. Sometimes it will be reboot itself again and again whilst still booting up. This can happens 5 or 6 times in a row.When not on charge my phone is totally fine.I have been charging my phone at night and in the morning it is usually charged up (even if it does reboot constantly) however the other morning it had not charged.It also does this when I have tried to charge over USB (connected to my iPod usb mains adaptor) so it's not the charge.I'm running 188.8.131.521.
After downloading an upgrade to Bold 9000 device received "App error 202 reset" message. Tried to reset and even removed the battery for a hard reset (about 4 times) with no success. Same error message. Any ideas anyone? Cannot reset.
This is the second BB Bold 9000 I have had this problem with.My phone will not reboot. I get the endless loop of:
red light white screen with black clock
The first time, ATT told me that I needed a new phone. Didn't cost me anything but is a pain in the **bleep** since I have no other phone and I have to walk 4 miles to find a working payphone. Had to do w/o a phone for a week.I have tried removing and reinserting the battery, to no avail.It is now 712 EDT (GMT -5). I will check back later this evening.
I'm using blackerry bold 9000.every time I reboot my phone (tried a few Alt/Shift/Deletes and a battery pull) I get the error after the security check on startup."Uncaught Exception: Java.Lang.NullPointerException" this always appears everytime i restart my phone. - the SMS and MMS icon is lost. - i cannot find my sms outbox messages.
My phone is stuck in some sort of loop and keeps appearing to restart, then it just flashes the startup screen repeatedly until it dies. The battery is draining at a rate of 3-5% a minute. Started when the auto-push update happened about a week ago. I was able to get to the Factory Reset option screen, but I do not want to perform that because don't want to lose my data. There was no option for clearing cache partition.
I upgraded my bold 9000 to os 5.0.0 last night and it is now in constant reboot cycle. I let it do all it needed to do whilst connected to pc blah blah blah and it now it just reboots all the time. Gets past the loading bar and then goes to the vodafone screen, then screen turns black, red light comes on, over and over and over again. However, when I plug it in to either my mains charger or the pc, it will boot up OK. Any help would be appreciated as it will soon be going out the window!! Or back to the shop.
After installing 184.108.40.2062 update, I did a reboot (alt+right shift+del).Usually, the Bold take about 3mins to reboot, however, it only took about 20 seconds. I saw the Blackberry status bar flash for only a second.I felt the phone did not really reboot. I was also noticing some funny errors when accessing pics or ringtones.I checked the memory and saw the Device Memory as "device memory cannot be read."
2 "fixes" I found: 1. reformat device memory 2. reboot again, either alt+shift+del or battery pull
Have you noticed this problem as well? I found another thread of this happening on .681 without much help either.. Device Memory cannot be read
I have fully wiped the Bold and reinstalled 3 times. I can reproduce the error everytime.I guess I can avoid the problem by doing a battery pull every time instead of alt+shift+del...but that's a hassle.Suggestions? Maybe this is just an inherit flaw for OS 5.0 since .681 and .822 are both showing the same symptoms.
my phone gets the spinning clock all the time....so i am trying to prevent it from as many apps from running at the same time...so apps you just can't stop.....but i noticed that "Documents To Go Files" automatically starts when i reboot my phone....i went to their site...but could not find the answer....anyway to prevent it from starting in the beg, instead of having to turn it off everytime?
I was currently on a mod and it keeps on freezing so i decided to revert to stock. Now, when i wiped phone using recovery tool, it is stuck on SONY logo and will not continue to boot. I have also tried to go recovery but it won't.
I tried plugging it into a wall charger for a day, i tried leaving it unplugged for a day, i tried leaving it plugged into the wall without the battery in for a day. I do not think it is the battery or charging related. Oh, and i have 2 batteries, neither let it boot.
So, i tried all the suggestions about App loader. The PIN is not recognized UNLESS, i plug it in without a battery (after i see the charging icon with red X on the screen). If i try to continue, nothing happens until i put in the battery, which immediately removes my PIN to PIN Unknown or whatever. So, it will continue and loader will freeze at step 2, device initialization.
Anyone had this exact issue or know how to get passed this point?
For reference, i never dropped it or damaged it. Actually i haven;t been using this phone, i decided to update it, all went well. Took the battery out and left it for a couple weeks. Went back to use it and this is what i got. Oh, and I tried JL_CMNDR and nothing happens.
Like i said, no error screen, i get a red LED, it attempts to boot up, but it barely moves and then I get black screen and red LED again and it just loops this process.
* I do have the extra ATT Insurance. However, I've had it for 1.5 years and it has been externally modded to ****. I could easily change it back to stock parts, but the "sticker" is gone. 1. Would ATT let me exchange it? 2. Does it have all my info on it?
I recently did a software update on my Blackberry Bold 9000 when prompted by my desktop manager to do so. After the update the phone began running slowly. I then delete a couple applications off the phone such as Myspace and Facebook to free some memory. Then phone had to be rebooted to complete deletion. After reboot, the phone screen turned white and froze. To unfreeze I had to remove the battery. When I put the battery back in, it would not turn on anymore. Could the update have fried the phone altogether?
I connect the blackberry to my laptop (lenovo T400) via USB, then the phone asks me to choose mass storage or not. if I choose mass storage the laptop freezes immediately + black screen and then reboot. it happens no matter if I launch desktop manager or not...
When I use desktop manager, if I DO NOT choose mass storage, then it works till I click on media and sync media, the roxio software launches and then it crashes again with exactly the same symptom as describe above.....
Reboot complete (main screen/carrier logo) First Time and Device Usable Second Time Minutes:Seconds 3:13 - 3:37 Custom Theme 3:11 - 3:25 Default Carrier Theme Theme's have no real effect from what I've noticed. Unless you have a really big gfx intense theme. 3:13 - 3:23 Password 3:13 - 3:25 Password + wallpaper on mem card 7:09 - 7:21 "Memory Clean Turned on" + Theme + password + wallpaper on mem card Re-test (that was way too long) 6:36 - 6:45 "Memory Clean Already On" + Theme + password + wallpaper on mem card. 3:23 - 3:45 "Encrytion Media Card Only" + BerryWeather + Theme + password + wallpaper on mem card + Mem Compression Memory Clean and Encrytion (Device Memory Enabled) either one of those on will increase reboot time by atleast 2-3mins. When enabling Device Memory encryption Memory Clean is automatically turned on and can't be disabled. So in my testing reboot time was between 6-7mins. My current config setup is that last test. Since Password is on, I see no need for Device Memory encryption to be on. Without the password you can't gain access to device files. ZonaSnap , QuickLaunch, Blink all preloaded during each test. 8 Email Accounts, about 80 read emails, and 100+ sms, 41 apps anyone that is getting 1-2min reboot please post your settings.
Why can't RIM develop a Bold 9xxx with the body of the Bold 9000 with larger memory, Trackpad, better camera? They've done it with the Tour and Curve. Plus they've got all the parts available already, just need a little engineering to fit the trackpad and everything else. C'mon RIM. We know you can do it. I'm sure you'd sell millions of them.
"Sorry unable to continue your session. please login again"If I want to verify my e-mail, I am receiving this error since I reseted my BlackBerry bold 9780.I tried to find a solution with the technical supportdesk, but when I entered the error it did not recognize it.
Quick question. I am starting a new Job and they are getting me a superbasic Perl. I need this for work and so I will be forking some dough out of my pocket to get one of the two following phones: Bold 9000 (I'll pay 100$ Canadian, not Us) Curve 8530 (pay 24.99$ Canadian). I am very used to the Iphone and HTC Touch Pro 2 (not trying to start a flaming/argument/anything else , its just what i'm used to). I am very used to browsing with the other phones and I have heard that BB phones are not up to par, so my expectations will be low. Out of the two phones however, does one perform better than the other (Curve 8530 vs Bold 9000)? Out of the two phones, which one do you recommend overall. I have read that the Bold 9000 even though it is older, it still outperforms the 8530...
I dropped my BlackBerry Bold 9000 on the weekend and damaged the LCD screen. The device still works, but two thirds of the LCD is now white and there's what looks like an inkblot on the left side of the screen. I'd like to try to fix it, but don't really want to shell out a lot of $ to do so --- I'm a month away from upgrading.Does anyone have any suggestions, or perhaps a dead BlackBerry with a working screen that you're willing to part with? A DIY repair -- this is out of warranty anyway -- looks straightforward, but I'm not sure I want to spend the $100 or so for a new OEM part to replace the LCD screen.
i upgraded my blackberry software to 6.0 bundle 2921, and im trying to reactivate my email.but when i type in my password and click on 'verify',it will give me a message after that says' unable to continue your session. login again' what do i do?
I recently updated to the new OS version, but when I went to set up my email accounts again, it's says "Sorry, unable able to continue your session. Please log in again." I know for a fact that the passwords are correct because it allows me to see the passwords.
in Email Account Management, I can access my email settings with my BB username and password, a new BB device is detected, and I can select to move my email account, but I get the following error after I enter my email password and choose "activate.":
I have a bold 9000 and I can not connect to the internet. Carrier is AT&T and I live in the North East (NYC area). Worked fine up until yesterday (Jan 25). Now gmail, facebook, browser - none work. I've tried the battery pull, turning on/off the network, run a diagnostic test from mobile network options. In the mobile network test i get the volling anomolies "Blackberry PIN-PIN: No" and it says can't connect to my email (gmail).
A few days ago I pulled my phone out of the holster and It was really hot and when i looked at it i realized it was off, and wouldnt turn back on. just a red light comes on like normal upon a battery pull but after it turns off the red light comes back on again once more then stays off for good. unless i plug it in then it comes on and goes off all the time. I got it powered back up yesterday but then it did it again. Today I plugged it in and I saw a picture of a battery come up on the screen showing it as empty, i was hoping that meant it might charge up. but no such luck. My main objective is just to get the phone up long enough to back up the info on the phone.
I was just wondering. As it turns out that the 9700 and 9000 share the same type of battery, so how is it that the bold has a far superior battery life over the 9000? Some have reported that the 9700 can hold charge upto 2 days even after heavy usage. So i was wondering are the batteries really identical in every way as claimed? and if they arent is it possible to swap the battery of my 9000 and expect a longer battery life? coz the one im having right now only seem to hold charge for about 15hours with fair usage on a 5.0 OS Zain Kuwait.