I bought this 16gb nexus 5 D820 a little over 2 months ago and had no problems with it whatsoever until this noon, when i was just browsing the 'net as usual, my phone became warm, i thought it was normal since i checked cpu-z it said it was 45 degrees and normal, cool..i kept on browsing till it rebooted by itself twice, still no problem,cool. since it was running low on battery i charged it and upon finishing the screen looks like this now, apart from it, everything else still works though.
I thought it was software issue since i didn't crack the screen, nor did i drop it, i was on purity + hellscore then. i flashed google factory image, unroot it and locked the bootloader again making it look as if it was just taken out of the box, but to no avail, it still looks like this up until now. I guess the heat somehow broke the lcd's component..
I have an X10 that I've had for over a year. I recently updated it and since then the screen has split in half and only blinks on and off on the bottom part of it. I can re-install the software and sometimes it helps, but I'm not too sure what else to do.And since the update I've been having problems with Mediascape, it comes on by itself and plays music. I stop it, shut it off and it opens again and plays music. I was wondering if there is something wrong with the Mediascape on these phones. Could it be buggering up the phone?
My iphone 2g fell out of my pocket last night while I was washing hands into the wash bowl and although I wiped it dry immediately, there was some issue after a while. I didn't realise it could cause some issues. But when I received a call, the touch screen didn't function at all and I was unable to answer the call.
After spending sleepless night yesterday to fix this issue, nothing seemed to work. I rebooted, restarted, restored to factory setting, many times, nothing is working. This is a 2g phone with 3.1.2 firmware, jail broken with blackrain. But I still receive the call and the iphone is not completely dead yet. I was able to restore it back. But the "Slide to Unlock" is not functioning, In other words the bottom part of the touchscreen is not responding. But the upper part of the touch screen works, where I can power off.
I almost gave up. Any one having any suggestions. This is very frustrating. I put the iphone in a rice bag, hoping it will take away the moisture, but that didn't work either. I also tried using the hair dryer to remove the mositure, but no success either.
My touchpad is sensitive and scrolls to the bottom of the list even though I have changed the sensitivity. I have done the soft and the hard boot and the test still same condition. Also I bought this phone from someone and no warranty. What are my options, as I have spent a lot on the phone to buy it. The phone has version 6 software.
i just need an advise or explanation regarding my c6-01..the upper touch screen of my c6-01 suddenly dont respond for a reason..i dont know what might be wrong but when i reset it (3 button trick)the part of screen(upper part) partially work..but not the whole screen.. i dont know if this might be a software problem or hardware problem
lately i hve been noticing that the bottom part (a few millimeters above capacitive buttons) of my defy's touchscreen is not working like i can't close the notification panel using touch (hve to press back button) , select settings button in camera360, delete icon in quickpic etc..!
I even tested it using touch test app nd there also screen wasn't responding in the bottom part!!
way to correct this or would I have to take the phone for warranty??
My iPhone 5s touch screen has a problem where it can be hyper sensitive.
In certain screens like iMessage, when I tap lightly in one area, the screen will continually to scroll upwards even when I am NOT doing the swiping up motion.Â
Sometimes worse is when I tap on a message to try to read it, it automatically swipe left on the message thread and delete the whole message thread and that is very frustrating and means I lose entire conversations. Â
OTher times, when I am typing out a message or email, the cursor for the next character jumps to the middle of the last typed sentence even if I did not do it.Â
Again, just to summarize, without my wanting it, my touch screen creed with one tap sometimes makes the phone scrolls upwards or leftwards on message threads automatically.
I dropped my iPhone, cracked the screen and LCD, replaced both, as well as the inner plastic bezel holding them together. Now, the LCD doesnt turn on and the touch screen will not respond. The backlight wont even turn on .It is still on, responds when I plug it into USB, it still vibrates and has its files and will be picked up by iTunes, but the screen is black with no display, no backlight and as far as I can tell the touchscreen is not working.And the kicker is that it was working for a few seconds, when I first put everything together, I just took it apart to get the home button to be seated properly, and bam, all of a sudden everything stops working.Frustrating indeed ! Would anyone be able to help me out please ? I am sick that it seems I will have to buy another part, but, if it will fix it then it's worth it !
so my iphone 2g cracked. I tried replacing the glass, but it just cracked a second layer of glass underneath it. I guess that was the touch screen glass? Anyway, they both ended up falling out. Now it just has this final "screen" like thing, which is just a white light. What is this? What parts would I need to repair the iphone, given what I have now?
past one week my E75 screen has decided to start playing up. The light on the keyboard lights up fine but the screen backlight only comes on when I push down hard on a certain part of the screen or give it a good whack. Anyone experienced this before and know how I might be able to fix it?
The screen on my Z5 has become over sensitive and when scrolling it keeps opening pages or links even when I hardly touch the screen. Indeed while typing this sort paragraph it's taking longer because the keyboard is entering letters for me. I have already rebooted the phone reinstalled software and was OK for a while. But now it's back. Impossible to go on to Facebook as I can't scroll down without opening every link.
I have constantly had a problem of the touch screen on my Torch being way too sensitive during phone calls. I frequently put people on hold or speaker phone accidentally during calls. Is there any way to eliminate the touch screen menu function while I am on the phone or make it less sensitive?
I notice this while trying to put it on my desk or one hand typing texts, it seems the auto rotate sensitivity is too high. Is there some way to "turn it down" so you can turn the phone more before it auto rotates? I know I can turn it off, but I use it in Chrome and YouTube and probably couple more apps.
I have a Nokia 2760 device. I broke it today and can see nothing on the screen except from a tiny part of the screen. I can still switch it on, and it seems to work fine apart from the screen. What I want to do is navigate to the settings and switch on Bluetooth (make myself visible) so I can get all my pictures of with my computer. What are the exact keys I would have to press to do this. These pictures are really important to me
I did not like the .320 screen calibration because the clicking was a bit on the hard side and the bottom buttons were hard to press sometimes. After switching to .428, the screen seems to be too soft. I get the double click effect on the bottom buttons although they are much easier to click now. While typing it just feels too soft. Yes, its easier to click but sort of makes the phone feel a bit cheap. So .320 was a bit too hard and .428 is a bit too soft. I really hope the next leak will put it right in the middle or at least give us an option to change it ourselves.
It seems strange, but I like the version 2.1 and the standard launcher, adapt perfectly to the x10 mini pro. So I have a question: The standard Launcher is very sensitive to touch, that is, when I change screen, it just goes to the editing widgets. I'm not getting much time with his finger on the screen.
I've had my Defy for almost a year and avoid sending text because the screen is not touch sensitive. It is pretty constant. I have to just about bash the screen to get any response when trying to input text. It also happens when trying to answer the phone or select apps.
every1,On potrait mode, the top part of my blackberry touch screen is glitchy i.e it is not functioning properly. Which ever way I rotate the screen, that particular problem persists on that part of the screen.The problem is regardless of slide or screen position.
For the past week i've been facing issue with my touch screen. As in, one column of the screen is unresponsive. I've tried my best to solve it using factory reset through phone and sony pc companion, but went it vein.