While attempting to update to 2.1 through SEUS, the installation failed, telling me that my battery was too low. The phone is now stuck in flash mode, the SE logo flashes for a brief moment, then I am met by a screen with a phone and an Exclamation Point in a triangle for awhile, then the phone restarts and does it again.
I have obviously tried removing the battery and trying again. SEUS has the same result every time I attempt this. I have also installed PC Companion, and one of two things happen 1) PC Companion completely hangs my Win7 (32bit) machine, or 2) Prepares to repair the phone, and while 'preparing', an error pops up and directs me to the webpage.
My Z2 wont turn on , and i tryed to turn it by presing pow + v UP But nothing have.. and tried charge it but it not charging and i try to repair it with pc companion and when they told my to pres pow + V down i do it but Pc companion cannot recognize my phone ..
i can't update my xperia mini to ICS.I can not connect to the computer as flash mode, the program asks. I tried several computers but do not go: (. Simply start charging.Why not put the program in the previous update, the flash mode, as it did?
in the update phase 2: after i press the back buton and connect the usb cable it lights green and i waited for more than 20 sec to boot in fkash mode but it doesnt happen and the phone turned back on automatically..
Here's my probelem and as i have read around the problem never has been helped out. Oke after i have flashed my phone from 1.6 to 2.1 i never had any problems. but when i updated my phone from 2.1 using PC Companion to 2.3.3. the phone just died. It keeps hagging in flash mode and after like 10 sec it vibrates and won't stop until the bat is dead. What i have done: I have tried to flashing it using the flash tools with many firmwares nothing worked, then i have used the SEUS repair function but when i use that it only wants to flash it to 2.3.3 and doesn't repair it, unless the repair is only reflashing and without whipe user data then it didn't work. Oke anyone with ideas? There are like 3 other people with the same problem and i think we all have an X10i So? The unbrickable phone has a weakness...
My phone seems to have reverted to Airplane Mode without me touching this and i am unable to get this off. Whenever i select the Airplane Mode to OFF, it does state it is OFF, however, the actual phone still remains in this mode, therefore, i cannot make calls/send messages/emails etc.
I bought my xperia play about a year ago. All of a sudden it has been acting up . I first noticed that my menu button wasn't working, so i switched it off and on again, it turned on in safe mode (still with the menu button still not working) with all of my downloaded apps greyed out. I thought it might have been an app acting up so i uninstalled them all. Alas no luck, now even if i am to download an app, and install it it doesn't even appear anywhere on my phone.
I'm having lots of trouble with my Xperia x10 mini pro. It is somehow stuck in a reset loop, it starts in safe mode, is locked and won't allow me to press any buttons at all. Once it is turned on i have to remove the battery to turn it off. My warranty has run out for this phone now but I do like it and don't currently have the money to get a new one really.
Last night my wife noticed that it wouldn't turn on. There was nothing else unusual. Figuring the battery had completely drained, I placed it on the charger and went to bed. This morning, the phone still won't start (nothing on the screen at all); but the weird thing is the LED flash is constantly on. Of course, it's warm to the touch. I had to run to work, so I haven't had a chance to plug it into iTunes yet. I have repeatedly tried holding wake/power and home buttons together for 10 - 20 seconds.
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005).. File analysis.. SetupConnection.. Initialzation.. Get PIT for mapping.. Firmware update start.. SingleDownload. sboot.bin NAND Write Start!! FAIL!
I am trying to flash 4.4.3 to my N5, but fashboot flash command is stuck at "sending.." and the fastboot screen is stuck at "downloading..." If I hold the power button to reboot the phone then it boots fine.
I searched and thought for sure this would've been answered elsewhere, but couldn't find anything.Anyway, when I'm in the camera app in camera mode, the flash toggle is set to "auto". When I switch it to "on", nothing happens. However when I go to video mode and press, "on", it works fine. Am I missing something?
I Just reflashed my N900 to RX-51_2009SE_10.2010.19-1.203.1_PR_COMBINED_203_ARM and wanted to clear it completely by flashing RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM Though the first 1 flashes just fine, but the vanilla file wont flash. I entered this command flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_ MR0_ ARM.bin -f -R. It detects the device, then it says "booting device into flash mode" But then nothing happens anymore, phone does not show usb icon anymore And i just see flasher v2.5.2 <sep 24 2009> Image 'mmc', size 255947 kB version RX-51_2009SE _10.2010.13-2.VANILLA USB device found found at bus bus-0, device address \.libusb0-0001--0x0421-0x0105. Found device RX-51, hardware revision 2101 NOLO version 1.4.14 Version of 'sw-release': RX-51_2008SE _10.2010.19-1.203.1_PR_203 Booting device into flash mode Suitable USB device not found, waiting. Can anybody explain me why it wont do this? EDIT: Tried a few times to start over. Sometimes it reboots, and i see the low power mode 5fots moving. Then after a few seconds, it freezes on the 2nd dot.
I downloaded all the necessary tools and followed the steps in that tutorial and I'm now at the step where you have to put the phone into download mode. It's now just sitting here doing nothing -- stuck at 0 % for the past several minutes. After scratching my head I realized that I needed to install the LG G4 drivers on my laptop (Verizon version). It was never mentioned anywhere in the tutorial when the drivers needed to be installed so I didn't know. Anyways, I did that, rebooted my laptop and tried it again. NOTTA. Download mode, still stuck at 0% and phone isn't doing anything at all.
The tutorial says I need to save the 4.6 GB image file in the root of the internal SD card for this work correctly. I'm pretty sure i have the image in the correct location.Just before I started all this rooting business, the phone was nagging me about an "update" so of course I took the update *derp*. (bad move) Before: V98611A. Now it's at 13B
Do I need to find a new image? If that's the case, I'd much prefer to revert back to 11A if possible. I'm new to modding/rooting so I didn't think that the image I downloaded would be incompatible with my new phone post update status.Really irked that I applied that update before rooting because now it seems i night need to find an image specifically for the 13B version.
My phone gets stuck in headset mode whenever I plug in my earphones. I unplug the earphones and the headset icon is still at the top. Tried reinserting the headphones and pulling out and still doesn't disappear. No sound will play through my speakers when the icon is there. The only way to turn it off it seems if when I restart the phone. It happens to this on different types of earphones too. I can't listen to music anymore without having to restart my phone afterwards
i was charging my phone via usb through my laptop and it suddenly went into white/grey screen with weird screen and so i pressed the home + power and went into recovery mode (itunes + usb logo). i tried to restore it and i keep on getting error 1600. after a few hours, the screen just went black and whenever i press home + power button, nothing happens. i went to a repair shop and a guy "shocked" the battery and there it went back to recovery mode. i tried to restore it again on dfu mode and still getting error 1600.
if i try it on restore mode, i will get error 21. what i did is i plug in the device, put it on recovery mode and then put it in dfu then restore and still error 1600 ---- googleed and Internetd so,me videos until i saw a video to change the host file and downloaded it and then boom --- it was fixed! while i was fixing my newly repaired iphone 4 version 5.1 -- all of a sudden it went to restarted then went into recovery mode. after a few hours again, it went to dfu mode and i went to the repair shop to shock the battery but that didn't work until now. i can't get my phone to restore mode even if i press the home + power button. stuck on dfu mode.i have a saved shsh for 5.0.1 and 5.1 -- so i built a custom firmware with snowbreeze and ifaith but i keep on getting error 3014, 1600, 1601, 1608 on restoring it.
When i put the flash on off mode the flash light turns on when the camera is focusing and it is annoying if you try to photo a person , as the light hurts the eye , is there a way of turning it off completly.
My BlackBerry Curve 8520 got wet a few days ago, it's since been left to dry out with all parts removed on top of my Virgin Media box. I checked for damage today & it appears to be working fine, apart from the fact that it's stuck in alt mode.Any suggestions on how I can get it out of alt mode? The button doesn't appear to be stuck. The 'alt' icon in the corner changes to '123' when I select the left shift button, but when deselected it changes back to alt mode.I've done a few battery pulls, removed all third party applications & re-installed its OS. To be able to type normally with letters I have to either hold down the 'return/back' button, 'X' 'V' or 'B' button, or the '$' button. Whilst holding these I can select whether I want 'alt' or not, but then it returns when I let go anyway
I just got my device back from the repair depot. I sent it in b/c I cant charge my battery. Everything else worked great on the device. I was told that it was out of warrenty and it was sent back. (Not a problem, I have a broken screen 9800 that I was using to charge my battery in the first place)When I got my device back, it is stuck on a white screen that gives me an option on testing the camera, LED, FLASH, etc.. But it does not give me the option of exiting or anything. When I plug it into Desktop Manager, I get that it doesnt connect and gives the options of retry or upgrade. So I go and press update, it connects and starts working. It gets upto the JVM and then it states that it can not connect to the device.What can I do here? It was fine (software wise) before I sent it off and the depot screwed it up!!! What steps can I take into getting my Torch back to where it was?