Xperia Pro/Neo/V/L :: How To Switch Back To Gb After An Ics Update
Jun 5, 2012
after an ics update many games not working as was in gb and their is not much of difference between the two.
hence i decided to install the gb but doesnt know the steps.
I left it on charge all night last night, and this morning - I noticed it was switching to "low battery mode", which I found strange as I had charged it overnight and noticed it was showing as 50%.... it kept going in to "low battery mode", which I thought was unusual as it doesn't go in to that mode until its much lower.
I noticed then that occassionally the battery icon was flicking between 50% and 7%, and then 4% etc.... so not sure why it was showing 50% as it looks like perhaps it hadn't charged at all and that it was actually low on battery? But I'm not sure.
So I plugged the phone in to my Mac, and opened Sony Bridge, and tried to go through the steps of Repairing the phone in case that would work - but as I got to the stage where I am meant to unplug the USB and then plug it back in to the computer whilst holding down the volume down button, the phone stopped responding. No LED lights, no switch on.
Presumably the battery has run dead - but after an hour of charging it in the wall socket, it's not showing any signs of life. The phone is running Lollipop by the way.
At the time of writing this im a awaiting yet another problem with power to this unit. I was talked into by a sales rep into buying another Xperia after experiencing the exact same problem with the older version as im now experiencing with my current model. I rely heavily on my phone and this is a massive inconvenience to me. The problem running out of power/charger not charging/ not being able to switch back on. Then the problem resolves itself only to happen again... And again... And again. This is not good enough. Funnily enough both models ive had problems with just after the warranty runs out. Leaving me with using my phone insurance not only making my phone insurance more expensive the following year but having to pay an excess charge.
I got some issues while switching on my phone. Today my phone has automatically downloaded system update, after completion i installed that update and few minutes after installation, phone restarted and shows this massage "The software update failed. Make sure that your phone is connected to computer and try again."
I connected my phone to the computer but still shows the same message and shuts down automatically and im not using any custom recovery.
Trying to update my phone and backup and restore contacts, msgs etc before, but when i press backup it keeps telling me to insert memory card. Mine is already in the phone, always has been, tried taking out n put back in again, turning phone on n off etc. still saying to insert a memory card!
Is there a way to switch back to 4.7 from 5.0? It takes forever to get on the net, then I can not click on anything reguardless of how many times I click on it. Im gonna switch back till they work these bugs out.
My phone was on 2.1 and I wanted to update it to 2.3, so i connected it to my computer and followed every step including the back-up and restore, the site recomended that I download the new back up and restore app, so I did.
I updated my ray to ics after 2 hours of successful updating, while installing an application mobile got switched off and never turned on again. What could be the problem?
I just got my BB bold 9930 yesterday, and when I open amail, cannot return back to the inbox. The return button open an overlay like the Swicth app button. I have to press the BB key and scroll down to close before I can get out of anything I open. If there is no close option, then I have to shut down but removing the battery to get rid of it and have the return key working for a while.
I bought a Verizon Bold 9900 and it's been working wonderfully well for the first 4 months. A few days ago I connected my phone to my laptop and did a sync on blackberry desktop manager. I think I might have also updated the software of the phone. But the basic intention was to backup my data (which hung half way). I woke up the next morning and my phone was switched off. Whatever I try, the phone only blinks red every few seconds but does not switch back on. I have tried using my friends bold 9900 battery but that didnt work either (so battery is not the problem). I am afraid this might be a software problem. Now I can't get this phone replaced from Verizon and need a fix because I really can't afford to purchase another phone like it!
After I switched an new iPhone 4S ( because the old iPhone 4S' screen was broken), those photes I took in China were gone. I've backuped all things to iCloud. How can I get those photos back from iCloud?
My Lumia 1020 screen went black earlier and the phone switched off. It won't switch back on and soft resets are having no effect. The Windows light isn't coming on when I connect it to the charger or a computer.
The phone was charging and in use when it switched off. I've had some problems with it recently (mainly it freezing and needing a soft restart) but nothing like this.
Have an iPhone6 iOS8 with Company Exchange Account and Complex Passcode. I want to switch back to Simple Passcode without removing Company Exchange Account. But Simple Passcode is greyed out and does not allow me to switch back to Simple Passcode.
today i just upgrade my xperia mini pro SK17i to build number 4.0.2.A.0.58, after this update, my back and menu button begin to be unresponsive or lagged significantly, the backlight of these two button also not turn on.the responsiveness of home button is not affected at all, so I'm not sure what is the source of the problem here.for example, let me demonstrate here:
1. unlock my phone - by slide to right > press the corner shortcut - animation is smooth > press the mail icon - open mail and I can imediately scroll down with no lag > press back button...wait up to 3 second and then it go back to home screen or worse it not registered anything, is it like I didnt press the back button
2. unlock my phone - by slide to right > press the corner shortcut - animation is smooth > press the mail icon - open mail and I can imediately scroll down with no lag > press home button - animated smoothly and goes back to home screen
what can make something like this happen? if this is software related action 1 and action 2 should be the same right? this is like some software component after update didn't detect the capacitive button correctly or something.there is option to repair this phone but it mean that I will loose all things in main memory, I will use this option as the last resort, but for now I would like to hear other opinion about this.other annoying stuff after this update:
- the APN setting was deleted so I must enter it again
- before update there is mcafee viruscan and mcafee wavesecure, after update it change into mcafee viruscan and mcafee security, and the mcafee security is not compatible with viruscan!! so I must delete viruscan, not that im using it tho, but still.
- there is some carrier spesific app that can be deleted but after boot restart showed up again
I recently bought a used N8 to replace my old one that got stolen, although it works perfectly, I've had a couple of occasions where it has switched itself off overnight, & I cannot switch back on until putting on charge, despite the phone being well charged the day before.Is it possible that an app I've downloaded could be causing the battery to discharge overnight?
my daughters fone wasnt sending or recieving texts or calls, contacted o2 they said do factory hard reset, the fone worked for a while after but kept restarting itself, now it will not switch on at all and when tryin to charge it either displays a battery sign with a red cross or the bb light flashes intermitting...
I am just updating my xperia pro to the new update ICS. And when it comes to the stage of "PREPARE" its loading, but then halfway through, the update suddenly stops and go back to the home screen of PC companion, I don't know what to do, I keep on repeating it but doesn't seem to pass by the stage of prepare.
The first indication of something wrong was the issue where my Droid 3 began connecting to my network extender only with 1x. But, the problem was worse than that, because it would then connect to a distant, weak tower for 3G. It would lose signal, then switch back to the network extender, where it would lose 3G once again and fall back to 1x. (How do I know it was swapping to a distant tower?the network extender team diagnosed it while I was on a phone call with them and told me they were seeing it do it live on their screens).
They "did something" (I don't know know what that something was), and it seemed to clear up for a while.Then, it came back. Another call to their network extender group, and they "upped the power" of the extender and the problem went away... for two weeks.Today, it started again. Only this time, it was doing the same behavior between two *actual* cell towers at work! The network extender wasn't in the mix, this time.My original Droid, Droid 2 Global, my son's Droid X and my wife's iPhone 4 all have NO problem with the extender (nor any other aspect of the service). This Droid 3 has failed in this manner three times, now.What's up, Moto? Can anything else fail with this phone? Camera blows, keys repeat, social networking is flaky, and apparently it has issues maintaining 3G in some situations. What a miserable experience.
I am currently operating iOS 5.1.1, bu thte "Enable 3G" swtich is still missing from the network options. I was wondering if anyone else had encountered this problem and how to resolve it.
after update 081.004 torch light doesn't on but the flash light is working.before update i use to switch on by pressing space key, or it has been removed to other way.i tried all way to on but doesn't..
If I try and switch an alarm off when it is rining, I am unable to do so using the touch screen.I have to press the red button, then go into the alarms and physically remove the alarm.This never happened with v30 (the last firmware I had)How can I stop it from happening?
I have an iPhone 4s (Verizon). I had recently purchased what was described as an OEM screen plus LCD after I had cracked my factory screen. After replacing the screen and LCD such features as the side volume controls, vibrate switch, and proximity switch (dimming after accepting a call) have stopped working. I double checked to see that all of the connectors were pushed on correctly and they were. Is it possible this may not be an OEM screen and causing the problem or is there a piece of the hardware that I may have damaged that controls all of these functions (i.e. motherboard)?
So of course there's switch mode from work and "play". I have this issue where when I switch from one the theme changes and if I switch back the theme doesn't change. I thought this would be fix, but I guess I was the only one with this issue. Just updated to .54. I'm of course not going to do anything about it I'll just work with it. Seeing that nothing else is wrong with my phone but that. Which is GOOD. Anyway wanted to see if and one else has this issue. I've had this issue since .52 didn't have it before that.My N8 as current Green running Xeon^4 3.2.1My E72 as backup 1 WhiteMy E63 as backup 2 BLUE (Where's my Icon...?) and..[URL] with the popup notes Nokia sheesh I don't need help from you :/I run Windows 7 Home Premium 64bit/Ubuntu 11.10 64bit on my HP Dv6 1030us (DiViUs)Windows 7 64 bit Pro on my Desktop (Giniro)Green Nokia N8 Current Phone running Xeon^4 3.2.1