I want to permanently disable this feature and can't find where to do so. When using a bluetooth headset, if I press the button in a call, it hangs up. However, if the other end hangs up first, my phone calls a random number from the phone book when I try to hang up myself. The same happens if the headset gets touched accidentally.
I have a Bold 9700 through AT&T.Twice now, I have accidentally pressed the call button on my bluetooth, and afterwards, I am unable to have sounds played through my phone after disconnecting the bluetooth.My alarm will not play in the morning, the phone will not ring/alert, and I am unable to play music.When I try, I get the following message: "Cannot play media while Voice Activated Dialing is active."How do I turn off the VAD? I do not wish to use it in the future, either
My bluetooth keeps disengaging especially after transferring between a phone call and listening to music. Voice activated dialing takes forever to boot up on my Atrix.
I have a curve 8330 and the voice activated dialing initializes on its own and loops in 3 second intervals until i do a battery pull. While the VAD is looping I am unable to make or recieve calls, it either disconnects me or mutes the phone and i am unable to unmute it. I removed the VAD all together using a program called MAXMEM, but the phone is still malfunctioning. now when i try to make an outgoing call it attempts to connect me for about 3 seconds then disconnects me. When trying to answer incoming calls it mutes the phone. I cant hear anything and the person calling me cant either. I went into settings and did a factory restore but it did not fix the problem. Is there any way to completely un-install the OS/software and re-install it? Im hoping that that will fix it. i have tried doing it via the BB website but was unable to.
Whenever my 5800 Xpress Music connects to a wired or bluetooth headset it starts 'Speak now' voice dialling which sometimes accidentally starts a call to one of my contacts and I'm unaware of dialling out until the recipient answers the call. I've checked the forums and instruction manual but switching voice dialling (or commands) off doesn't seem to appear anywhere.
I have a Bold 9000, and sometimes the bugger just drives me nuts.This has only happened to me twice now, but it's a pretty costly issue..My voice dialing seems to randomly turn on, I have no idea what is leading up to it, I hadn't had my headphone jack in it for a couple of hours.But then, the next morning, my alarm doesn't go off because the stupid voice dialing was activated [as you can see, this is a costly issue because it has lead to me missing a shift].Anyways, all the posts that I have read the solution has been to disable the side key.. Which I did a long time ago, and I double checked today, yes, it is turned to video camera, not voice dialing.How do I disable my voice dialing?
I seem to remember seeing this somewhere before, is there a way to disable the annoying auto-suggest feature during voice dialing? You know, when you voice dials and the automated voice comes off saying "next time say name... "
I update my Sony Z3 at 5.0 Lollipop and I don't know if have or can get from market google play the voice dialing? I connect my Phone via Bluetooth at car navigation but don t find Voice Dialing like have before at Samsung S4. I try many application but don t find.
Voice Adaptation "Adapt your voice to improve recognition results of voice dialing."I keep getting half way through it and it tells me "Time Expired!"i have tried several times and can't get to the end.It is not as if I am taking a long time.
This is for a 32GB One, (AT&T carrier). I use the phone to listen to music on a motorcycle, specifically to stream Pandora and I plug the phone into the sound system of the bike. Not sure how important it is but the only time this happens is when it is plugged into the bike so it seems odd that Voice search would do anything- I assumed the built in mic would be inactive since the phone thinks it is connected to a headset but I haven't tested that (just a thought).
The problem is that the phone will launch Google's voice-driven search application for no apparent reason. I have tried turning Google Now off and went into the "Voice" settings and disabled hotword detection but the app still randomly launches.
When the app self launches, the phone goes nuts cutting out Pandora, tries to dial various numbers (but typically is a re-dial of the last number). I am too new to Android to realize what is launching this and can't figure out how to kill or disable Voice Search. I have tried going to Settings-->Apps and all apps but I could not specifically find the Voice Search app.
I am new to this forum and have been quite pleased with my 9700 until recently. For some reason my voice dialing has changed so that now it looks up contacts in last name first order i.e. if I say john smith it looks for a last name "john" This is a new phenomenon that seemingly has been initiated by the device without intervention from me and I can't seem to get it corrected. the contacts folder is sorted by first name.
How do you turn off the voice dialing? It keeps popping in when I am listening to an audio book with the headphones on, and I am unable to turn it off. It can also come in when I am listening to the radio. It is a real pain in the neck.
I am having a problem with my voice dialing function. I connect with my bluetooth, the application does start and prompts me for a voice command, and after I give it, the application will pull up a name that is not EVEN close. I have unpaired my device and re-paired it. No help. For general information - previously had the Palm Treo 800W running Windows Mobile 6.1 and the voice command/dialing worked just fine with the same blue tooth device.
Does anyone else find voice dialing useless on their Tour? My previous phones' voice-dialing functions worked smashingly well (99% success over four years), but the Tour I just want to smash. (100% failure)
I read the threads suggested for my subject entry, and some people seem to have great luck, while others don't. I've tried the voice adaption in a silent room, I've tried turning off prompts, etc... It remains literally TOTALLY useless.
"Call Pete" results in "Please try again". I try again, and I get, "Sorry, command not recognized."
"Call Home" yields "Did you say, Call ATT Customer Service?" What?
Thinking maybe I have a bad mic element in the phone, I tried my BT headset. With that, "Call Pete" results in "Calling Ford Dealer Work 1" and then to add insult to injury, "she" says, "Next time, just say "call Ford dealer work 1".
I really used the heck out of voice dialing on my previous phones, and find it hard to believe that a much newer phone won't work at all. I hate regressing with technology.
I'm still in my 30-days "satisfaction guarantee" and I may just have to try something else. I can't believe this function is so totally useless.
My Blackberry Curve 8330 is having a problem with the voice dialing spontaneously turning on. Occasionally (about 1/4 of the time) when I try placing a call, the sound is muted-- as in I cannot hear ringing on the other end. When I hang up, the phone initializes the voice dialing feature. It continues to pop up up at 3 second intervals, at which point I can no longer receive or place calls. I can write texts and receive them, but because the voice dialing keeps popping up, texting isn't an easy task! This continues all day and I must restart the phone for it to stop (does not work all the time).
Bit of a numpty with my BB right now , how do I get the BB to dial a contact when i have the BB clipped to my belt using the wired handsfree kit or via a bluetooth headset ? Is it possible to dial without having to touch the BB and also the ringtone never plays thru the headset which is strange.
I have looked everywhere I can tink of but can't find anywhere that shows how to set up and use voice dialing. Can someone point me in the right direction please.
I have a moto droid on VZW. I have it connected to my BT, but voice dial doesn't seem to function. Once I start a call I can then talk on the BT and that works very good.
Previously I was using the original firmware which was current as of December 2009 and didn't have any real issues with my phone. Now I have the latest firmware, I cannot seem to use voice dialling effectively anymore. It either says "No match found" or dials the wrong person. I think I remember doing a voice training exercise when I had the old firmware in which I said lots of different people's names but can't seem to find that on the new firmware. Has this feature been removed or relocated with the latest firmware update?