I got my neo v can't connect to any wifi spot..if it was connected, but it will state that connection limited and can't connect to internet and then after few second it will terminated and continue obtaining IP address. This problem will continuously repeated..its happened not only at my home, but also at other wifi spot. So I am stuck using this smartphone.
View 4 Replies
I'm new to the sony franchise and I'm very impressed with the Z2. The only problem I have is that my wifi keeps dropping on my phone and then it gets stuck at "obtaining ip address". What I've done is: reset my router, "forget" the network on my phone, reconnected the wifi. I've also rebooted my phone, this connected to the wifi successfully, but disconnects after a while again. I disabled stamina mode and all other power saving options, but nothing worked.
View 10 Replies View RelatedWhy can't I access to WIFI? It always shows "Obtaining IP Address". I was using it in the morning then when I come home, the problem occur.
View 1 Replies View RelatedTo turn my wifi on i use widgets, it gets stuck mainly on obtaining ip address. For it to connect quick I must go into settings to wifi for it to work. Why is this happining? I have a solid wifi connection. Is anyone else having this problem. Just to refer my knowledge to others classify me as a hacker.
View 4 Replies View RelatedI bought a Nexus 5 about 15 days back. I am very happy with the phone - except for the fact that I face difficulty connecting to my Home Network in particular. My Windows Laptop, My wife's iPhone and iPAD connect to the same WIFI almost instantaneously. However, my Nexus 5 phone keeps saying "Obtaining IP Address" endlessly. At times, it says "Weak Signal - Cannot Reconnect" and gives up. However, all other mobile devices show that the signal strength is good. the phone does connect to the WiFi after sometime by itself.
I do not have this problem when I am at my office. It connects immediately to the WiFi in my office.
The Router setting at home is as follows :
Mode : AP
Band : 2.4GHz (B+G+N)
Channel Width : 20/40 Mhz Auto
Channel Number : 11 - 2462Mhz
Broadcast SSID - Enabled
WMM - Enabled
Authentication - WPA-PSK
Cipher Suie - CCMP
Can you create a hot spot with one phone then connect WiFi with another phone if so does any one konw step by step how to do this. the reason I ask is I have 2 electrifys and if I could do this then when there is updates I could make a hot spot with one phone and connect wifi with thother and do the update then swicth and do the same with the other phone instide of going and looking for a wifi somewhere.
View 2 Replies View RelatedIts been 2 weeks since I bought my NEO V and not once have I been able to see ANY wifi spot on my device let alone connecting. When I press SCAN it does nothing. Theres been no improvement even after upgrading to ICS through PCC.
View 1 Replies View RelatedAfter 4.0.4 release installed I'm having problems using the hotspot function. my laptop connects as usual but I can't surf the web. there is no problem with my wireless connection (I use it with my home wireless router without further problems) but I can't open any website when it's connected using the hotspot (data option is also enable in the phone). How can I fix it??
View 3 Replies View RelatedI have several wifi devices (laptops / tablets) that connect without a problem to my home WPA2 secured wifi network.The photon detects this network and will connect to my home network, BUT ----Implied Profanity Removed---- there are many occassions when it will try to locate the router and try to connect but always loops with "obtaining IP address" -The only solution I have for the photon to connect is by manually rebooting or turning off/on the router, disabling photon wifi > re-enable photon wifi > select my home network and it will connectI have a static IP address for my main router connection and have assigned a DHCP range from : 192.168.31 - 192.168.254 with a lease expiry of 24 hours.
The router and my bandwidth (24mb down / 1.5mb up) has been going strong for a few years.What setting am I missing here or need to modify? I never had to reboot or reset my other wifi devices to ever connect, and I just changed the DHCP range to the above again today. I had a channel setting of "6" and changed it to "11" now also...Once the wifi is connected to the photon, it will stay connected for the most part, but if I leave the home or perhaps overnight the wifi gets disconnected resulting in me having to reboot the router, disable photon wifi, re-enable photon wifi for it to connect
I haven't had any problems with my blackberry torch when I first got it having set up all my email accounts fine. Now however, I received a message asking my to verify my email address, so in setup, email accounts, there is a list of my accounts. When I type in the password and type verify - I get a message "sorry, unable to continue your session."
Looking online, I've read that I need to register my phone with 02 my service provider. So, when I go to the correct page and enter my pin and IMEI for my phone I receive another message "Your account is not accessible via the HTML browser..." Again, looking online this is due to my phone automatically registering.
I have seen that you can change this in the same email account option where you add emails, but, when I click on the email account option like mentioned before, it presents me with a list on my emails to verify but no other options. I don't know what I need to do now to start my emails coming through again.
I got an unlocked blackberry curve 8520 in February. I did get it from Poland but everything is the same. I don't have a data package, but about a two weeks ago I found out I could connect to wifi anyways. I did this and it worked at my house all day that day. Then I left and when I came back it wouldn't connect to the router it was previously connected to or any others. After searching forums I've tried changing all kinds of settings but they all seem to be where they were supposed to be. I did notice though when I'm in 'options> wifi> menu> wifi tools> wifi diagnostics the status bar says "IP address no loner valid" for all the routers I try to connect to.
View 1 Replies View RelatedSo my roommate thought it would be a good idea to try and connect itself. He ended up with some weird setting that made the wifi disconnect from the devices if they were dormant for more than 5 minutes. My phone went off line. I guess the setting was changed back because our other laptops connect and his iPhone connects but my unrooted HTC One on AT&T keeps giving that DNS error when I attempt to connect through Chrome or the stock browser. Nothing works...It says I am connected. It says I have an excellent signal but nothing will connect.
View 2 Replies View RelatedMy Xoom post upgrade to 4G is now assigning the IP address of 192.168.20.1 to the device usb1 everytime it is rebooted. This apparently hardwired configuration conflicts with my homenetwork's default gateway.Is there anyway to change this with out rooting the device? I would rather not have to re-IP my home network or not be able to connect to any network via Wifi who uses that IP address as a default gateway.
View 15 Replies View RelatedDoes anyone know if Xperia X10 is going to have flash player installed on a up date. i have just updated my phone to 2.1 - update 1 now from 2.1.... also if you do not own a credit card... how can you purchase paid apps?
View 1 Replies View RelatedLike many of you , I'm having WiFi connection problems with my new BB9700.When I am out of the house, I can see my BB finding local WiFI hotspots and I can connect to them immediately.However, when I get home, my BB doesn't connect to my WiFi, returning the following error message:
Unable to Connect
Reason: Failed to obtain an IP address
I have downloaded the latest BB software (now running version 5.0.0.351), cold booted everything in sight (router, phone, coffee table and the cat) but still get the same error. My foot hurts, the cat isn't talking to me and I still cannot connect at home ! Of course my Carrier's connection works perfectly as does their outrageous fee structure... (They are 3G, or Hutchinson Telecom by another name.)My WiFi service provider (PCCW / Netvigator Hong Kong) has checked the setup of my system and reports that everything is working correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the hotline guy can see when I connect each of them to the system.I have tried different combinations of switching the usual options on and off on the BB but still can't get a connection.
When going to a baseball game my phone loses it's signal, however, the Diamondbacks offer AT&T hotspots throughout the building. I have AT&T service so you would think this is a no brainer, my son who has Sprint gets on with no problem, my husband with Verizon has no problem, (both have Android phones), my daughter with A&T service and an iPhone has no problems, however when I go on, it searches for awhile and then I get the following error message and it shuts off my wifi
AT&T Wi-FI Hot Spot Status Unable to confirm eligibility, please call Customer ---and then it fades away, if you click on the error message it completely disappears and there is no phone number to call. This is my second phone because of this issue and it isn't fixed. I would like to be able to use my phone to use MLB at the Ballpark but it's like taking a brick to the ballpark.
In my xperia 8 says "Mac address not available" Is there any way to know what the mac adress? I need the mac address to connect to wifi.
View 2 Replies View RelatedWhen i get to the wifi setup screen (no wifi available) it wont let me continue with setup without selecting a wifi network...there isnt one around so cannot continue with the setup, is there no way around this ?
Info:
iPhone 3GS
I have a huge app collection so normally get quite a few updates every few days. I normally plug my phone in at night for charging and press 'update all'. By morning everything is done as it was done over wifi. For some odd reason, it has not been working for the last few days. When I get up in the morning all the apps are in the exact state of download as when I plugged my phone in for charging. What can be the culprit here? Really need this functionality.
Info:
iPhone 4S, iOS 5.1
I'd just like to point out that the GPS location is absouletly spot on and I for one am dead impressed!
It's a shame the compass is so susceptible to local interference. Doh. I just couldn't stop myself.
I downloaded the recent update, followed all the instructions, did the back up and restore. I've lost all my contacts and I can't connect to wifi.
View 8 Replies View Relatedhow do i connect my neo v to my ps3 via wifi
View 2 Replies View RelatedI had tried a lot of times to connect mi xperia ray to pc companion via wifi, the device's driver is installed correctly but when I select the computer in trusted devices for wireless media transfer , pc-companion says the connection is not done properly, says there was an error. I have the official rom 2.3.3?
View 1 Replies View RelatedI updated my X10 through Sony Update Service. But now my x10 has 2.1 but i am not able to conenct to Wifi. 3G works fine. But WiFi
View 6 Replies View RelatedAfter i updated from 1.6 to 2.1,i couldn't connect to my wifi
View 3 Replies View RelatedThere my x8 wont connect via wifi.it used to when i connect now it connects via wap when im in the house, all settings are correct on fhone the wifi is turned on ect
View 6 Replies View RelatedI can't able to connect Internet using WiFi..I connected to an open connection the status of conn. shows signal strength - good, speed - 54 Mbps, I uncheck the data enabled option in mobile networks menu, But still I can't able to connect thru WiFi.
View 5 Replies View RelatedI am using my xperia Z2 for more than 2 years and I have a small issue with my phone. When the screen is on with black background there are a circle blue spot down in the right of screen and I am sure that it's not a dead pixels only when black background and i didn't think so it's software issue as i update to lollipop
View 4 Replies View Relatedi am getting a message saying "Remove cable or connect a device to continue" although i never connected any device to it. message just keeps popping up. and also sometimes the touch screen becomes unresponsive while am in call.
View 6 Replies View RelatedJust bought X3-02 and and a new problem has surfaced...am getting a message saying "Remove cable or connect a device to continue" although i never connected any device to it. message just keeps popping up. and also sometimes the touch screen becomes unresponsive while am in call.
View 7 Replies View RelatedJust a question regarding the wifi. It works fine but when I am at my brothers house and using his wifi it will only connect to the Internet for a few pages or communications via whatsapp etc., then I have to turn off and on the wifi to go again. He had the same problem with his phone which was also a x10 but he has no problem since he got the new Arc. His wifes iphone also works fine.
View 2 Replies View Related
