I can not connect my new iPhone 4S to my home WiFi network, whereas other networks are OK. A possbile explanation - the password contains 26 characters, and I haven't tracked don't how to change that password.
I currently have the blackberry bold 9700 for tmobile.I can connect to my home network but i cant use apps such as the facebook app or the IM+ app or any social networking apps of that sort.Whenever i do try, it says you need a mobile carrier internet connection or a wifi connection. I have a white signal(showing im connected) to my home network but nothing will work.
I still have to wait for full-functionality on my X10 when the service provider gets updated to a new contract in a few weeks.However, I cant get it to connect to my home wi-fi network.It recognises the network and remembers it. The Network Key is good. Ive tried both with and without 'data traffic enabled', and of course the phones Wi-Fi is turned on- Ive tried that both through the main screen and through the Wi-Fi Settings screen.I got a shock bill last week because the phone was using dial-up connection instead of Wi-Fi without me realising it!Also, how can I ensure it chooses unsecured or 'FreeZones' when on the move over dial-up? I want to be able to use the Navigation function, but worry about the phone being connected too much, even with the internet bundle I am subscribing to.
i am now living in singapore and i need to tell you that i cannot connect to the wifi network although my uncle's nokia n96 can or even my psp. i am using my home wireless network. and sometimes when the wifi is connected the Internet page does not open. but my internet page opens.
I've got data traffic, and Wi-Fi ticked and I can see my network on the Wi-Fi Networks list but when I click on it and enter the password beneath Wi-Fi it says "disconnected".What's even weirder is that I managed to connect the phone to the internet the first time I booted it up for five minutes, but since then I haven't been able to recreate that success . What should I do?
my droid X2 will not connect to my home Wifi network. I have to reboot my router to get it to connect. It tries to connect but displays a message that it is "Getting an IP address" but never connects without a router reboot. This is a big pain.
I keep getting 'Out of range' from my aino while trying to connect to my home wifi (2wire 2701HGV-E). Need help on how to solve this! Also my phone is not detected during the update service via usb-to-computer. It is stuck at the 'connect' page and doesn't move onto 'confirm'.
While in random wifi zones, no problems. However, while i'm at home using my own network, all of a sudden i can't access the play store. says 'No Connection, Retry'.... Problem started months ago, i google it and see people with similar issue but none of their fixes worked for me.
I recently changed to EE and wanted to add my new number to iMesssage, so I looked on apple support and found the solution so i did it and reset my network settings but now when I try connect to my home WiFi it wont work?
I've been trying to get my phone to connect to my existing home Internet connection, which is wireless. I gave this thought because my husband's IPhone connects to our home network so easily. How do I get my C901 to do this? Or is it not possible?
When I tried to set up the My Presence section within the phone I entered in my username, password and then it asked me for server information so I entered in what I thought was the right info, but now it keeps giving me a network error failure message.
Basically I was streaming a video on you tube the other night, until my Nexus 5 froze up. My phone was taking way too long to respond, so I decided to hold the power button until the device shut off, and I held the power button again to turn it back on. (duh) As soon as it turned back on, I was no longer able to connect to my home WIFI. So now whenever I try to connect to our home WiFi, I get an "authentication error" and the WiFi network status just comes up as 'saved" instead of "connected". My mobile Data works fine, it's just my WiFi that isn't working anymore. Did I accidentally fry a component within my Device that allowed me to connect to a WiFi network?
I have just purchased a used Satin phone and I am having problems trying to connect to the INTERNET using the WI-if. I can go to websites but when i try to log-in it goes back to the menu screen. Is there something i need to change in the settings? I have downloaded the latest update but this hasn't made any difference. It may be something simple, i know but as its a new phone for me i am not sure what to do.
My vivaz can't connect to internet via WiFi (router tp-link) when connection is secured I already checked all possible combinations. When I take off the password from the router there is no problem at all. Another weird thing is I can access router webpage whilst connection is secured but that is it. My router is showing all the time that connection is associated and authorized. Didn't test this phone on other WiFi points.
I have a SE, Vivaz mobile phone. I buy it 3 days ago. I liked phone very very much. But I had a problem that When I tried to connect WiFi, phone started to search WiFi, after it waited 5-7 seconds and it restart. I updated firmware via Update Service. but it restarted it again again. What is the possible problems? Is it software problem or hardware problem?
I have been using this phone on the WiFi now for over 6 months - just now unable to connect to the WiFi have fiddled a bit and probably changed the settings now not at all sure what settings it should be on. Can anyone advise the correct settings etc.
I just got a replacement iphone 4s and am having trouble connecting to my home network. When I type in my password it says it cannot connect to the network. Before I got my replacement, my previous 4s was able to connect to the same network.
I have a Sony Ericsson K800i and until two days ago it was working just fine. But then it displayed the "No access to network." message and I couldn't make or receive any calls. I tried to restart the phone, to take off the battery, to reset the settings, to set a network manually etc etc but still nothing.
And while it is searching for a network, it is draining the battery too. It was fully charged this morning, and now it's only 25%. Normally, it should take 3-4 days to reach that power level. I should mention now that I'm in roaming in Munich, Germany since three weeks, and my phone bills are payed on time, so it shouldn't be an mobile operator problem.
My phone (K800i) has displayed no network coverage for almost a month now, I have tried network search auto and manual, and I have tried my SIM in other phones and it works fine. Does anyone have any suggestions because I am fed up of this phone I am having to use while I try and fix my own.
I will try explain my problem and what i`ve done as clear as possible.I bought w995 on orange from ebay and i thought that unlockingdebranding will be a piece of cake.I was wrong, So, after frrustrating news that A2 phones can be unlocked only by a paid service i ordered one myself. Finally i got it unlocked, but still on Orange firmware. Shoved my o2 sim in it and everything was working fine. Next step that i took - debranding. Got A2uploader,FS+main+custom pack from c905 and started to flash it. After flash was successful I turned it on and was kinda amazed - "no network coverage" was written on my screen. Tried different SIMs- same problem.So, now i`m stucked with this pointless brick aka phone. Some info about recent solutions given: -It`s not in flight mode. -Master reset didn`t help. -Tried various FS+main+custom packs -Tried D-ultimate unlocker (Direct Unlock(+Sec. zone rebuild))
I bought the K800i a few months ago. I bought it from eBay, Hong Kong. Now it's been having SOOO MANY PROBLEMS, network, smsing etc.I am using XS++ 3.1,This is what it's telling me: 13:06:54| Baseband ID: 9900 13:06:54| Protocol Version: 3.1 13:06:54| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:K800) 13:06:54| ...using GDFS name 13:06:54| 13:06:54| Profiling SEMC phone... 13:06:54| Platform: DB2020 13:06:54| OTP CID: 51 13:06:54| EROM CID: 53 13:06:54| EROM Color: Red 13:06:54| IMEI: 35258622xxxxxx 13:06:54| Phone ID: K800 13:06:54| Region: EUROPE_1 13:06:54| CDA: CDA102568/101 R12A 13:06:54| Firmware Version: R8BF003 13:06:54| EROM: R3A099 13:06:54| Ready for operation! Can i flash it or something? because Sony Ericsson won't let me update it.If I can flash it, can someone tell me how, and provide me with all the softwares needed please?
I Need Your Help I Have Sony Ericsson Xperia X10 Mini Pro And When I Go To Wi-Fi It Founds My Home Network Name I Put The Code But Dont Let Me Connect Please Help me I Need Download Apps/Games I Need It For Facebook/Twitter And more If You Know Something PlEase Let me Know
Since yesterday (Sunday 18 October) my Z2 hasn't been able to connect to my home network. I've tried resetting the router, rebooted it, rebooted the phone, forgot the network and reconnected. Nothing works. My mobile network still works though. Also, my Vaio laptop and my girlfriend's iPhone don't have any problems connecting to the network.