Samsung :: Intensity / MEID To ESN
Mar 8, 2010can a samsung intensity be change the meid to esn
View 2 Repliescan a samsung intensity be change the meid to esn
View 2 RepliesI've tried Samsung PC Studio 7 with no luck - it will not recognize my phone. Have changed USB phone settings to Modem as I read in a thread somewhere, still no luck.
I don't have texting, don't use internet on the phone, so I can't email them to the phone.
I was able to transfer mp3's via. the USB cable & sync with Windows Media player, that works great, but I can't get them to set as a ringtone...
Is the only "free" way to put ringtones on this phone is to use a SD card? If so, how is that accomplished?
Just got new Intensity. After activating and playing around with it for awhile, I updated the software through the "Phone Info" menu. This appears to have worked, everything on the phone still works fine, however there is now an "AA" on the middle left side of the home screen. It even rotates to middle left with the screen when you slide out the keyboard. When bringing up Menu's it disappears, but is always back on the home screen when you return. Have tried changing wallpapers, verified that no banners were turned on. Have tried power cycling the phone several times, no luck getting rid of it.
View 2 Replies View RelatedHas anyone figured out how to get stereo sound out of the 2.5 mm jack on a Samsung Intensity? I have obtained several different "stereo" adapters for 3.5 mm headphones, and I still get either mono sound or sound out of only one channel.
View 1 Replies View RelatedI would like to know if there's a way to put ringtones on my samsung intensity with a micro sd card. i've tried to create a folder called : my_ringtones and it didn't work! also, i'm with telus.
View 6 Replies View RelatedI got a samsung intensity and I was wondering how to transfer a image(to be a wallpaper) from the pc to the phone? I tried to use the data cable it came with (the usb cord), and also the samsung pc studio. But I guess I can't figure it out. Also, can I set seperate ringstones for my contacts? I tried, but they are still all the same.
View 1 Replies View RelatedIm trying to bluetooth from my computer to my phone (samsung intensity ) but it always says transfer failed!
View 2 Replies View RelatedI formatted, then put a couple of songs on it to test it out. The phone recognized and played them, so then I added the rest of my music to the memory card. There's about 14 gb on the card now, so it's almost full. The phone also accurately tells me that there's about 14gb of the memory card that's occupied. BUT The music player now only puts a small portion of all those songs into its playlist, I would say it only plays about 2 gb out of the total 14 gb. I also cannot choose which songs get put on the playlist. I am on Telus, NOT Verizon, by the way. Why can't I access ALL my music in the music player?
Is there a maximum to the number of songs in the mp3 playlist that I wasn't aware of? Did I buy the wrong memory card?
Have tried holding various keys in an attempt to access a BIOS screen or some such thing to no avail (why aren't cell phones more like computers?). As for how my phone got to this state...
-I wanted to add custom ring tones to my recently purchased Samsung Intensity but found that texting them to myself via vzwpix.com led to a significant decrease in quality and the costs would quickly add up as I attempted to fix the issue by editing the sound files in Audacity and texting newer versions to my phone
-To get around using vzwpix.com, I found a method of putting the files directly on the phone by installing the phones drivers to my computer using Samsung PC Studio 3 and moving them directly to the phone using Qualcomm Product Support Tools. The method is copy+pasted below for reference
-After a while I got the ring tone to how I wanted it and went to delete the experimentation files on the phone. I had done this in the past through the phone's interface without issue (though an attempted file rename had caused a quick freeze which was solved by removing and replacing the battery), but this time it froze when attempting to delete the final file
-The phone would not respond to any keypad presses including the power button, so I chose to restart the phone by removing and putting back in the battery
-The phone will no longer pass the "Verizon Wireless" screen and reboots after hanging on that screen for ~7 seconds
Pasted below is the complete method I used to transfer the files for reference. Other smarter methods may exist, but given the issue I had with vzwpix.com, my lack of a mircoSD card, and my desire to avoid media messaging charges I elected to go with this method. Credit goes to ch from the Mobiledia forums for figuring this out and typing this up. It works beautifully aside from the issue I have had. I suggest that anyone who chooses to use it remove sound files from the phone only through QPST and not through the phone's interface.
Software required:
1.Samsung PC Studio
2. QPST (Or other software to allow you to browse the phone's file system)
1. Install Samsung PC Studio (Will only be used to install drivers for the intensity)
2. Change USB Port Map to "Modem" on your phone
a. Go to Settings & Tools > Phone Info > and then press the # button.
b. Enter 000000 for the lock code.
c. Select option 2 "Port Map"
d. Select option 4 "USB"
e. Select option 4 "Modem"
3. Plug phone into usb port.
4. Go to device manager and install drivers for the unidentified devices
a. The drivers will be located in C:Program Files SamsungSamsung PC Studio 3
5. Start QPST EFS Explorer
6. Browse to brewmodmr on the phone
7. Delete MrInfo.db
8. Drag and drop your mp3 ringtone files into this directory
9. Restart the phone.
10. A new MrInfo.db file will be created. Copy it to your desktop.
11. Edit the file with notepad. You should see an entry for each sound file in the directory, followed by |0|0 or something like that. For the first file change the second 0 to a 2. For the next file change that same zero to a 3, and so on. I guess the second zero just needs to be a 2, 3, or 4.
12. Copy MrInfo.db back to the phone in same directory.
13. Reboot the phone and your mp3 will show up under the "My Ringtones" menu.
This phone is so slippery! I can't seem to use it without throwing it on the floor, which I have done about a dozen times now. My other phone was a Motorola with a soft grip rubber built into the case, very easy to hold on to.
What is a solution here? Any recommendations on how to gold on to it? I was thinking of some type of case, maybe a neoprene rubber type that would allow easy access to the buttons/functions, but thought I would ask some folks who may have already experienced this problem.
I just got the Samsung Intensity for Verizon. Everything is great except for one critical thing. I download audibooks from my local library which come as DRM protected WMA files. They play just fine BUT if I exit the music player (to make a call, or just put it away for a while) when I bring it up again, it does not remember its place and goes back to the beginning of the file. This is crippling when you have 72 minute "songs" since you can't be scanning to find your old place every time. With non-protected WMA's even of the same length,it remembers it's place just fine. Also, on my old Samsung Juke it was not a problem. I asked Verizon tech support and they are forwarding my issue to Samsung. I am hoping they will come out with a fix, but they easily could just ignore a complaint from one lone user. Is this a problem that other people have seen? What are the chances that Samsung will actually produce a fix? Is there a workaround to get it to remember its place in a protected WMA?
View 1 Replies View RelatedI had a boot-looping Chocolate 3, so then I emergency flashed it and did an MEID repair using tonycortes' method. I got everything working, but now MMS doesn't work. I tried copying the MMS server settings off of a known good phone of the same model and firmware version but still, failing to send every time.Anyone have any really good ideas as to how to get MMS working again? Still on VZW, not cross-carrier flashed or anything.
View 3 Replies View RelatedDoes the XPRT phone need to be activated by Sprint to get a HEX MEID? I have been using the XPRT off Sprint's network since purchase. It doesn't appear that I can activate the device from Sprint Zone while not on their network. Can I phone them to activate the XPRT?
View 4 Replies View RelatedI had my LG Rumor(unflashed) plugged into uniCDMA to get my security code and I clicked "read all" and my phone's info showed up. I saw the phones ESN # and I clicked "write" (assuming it would just rewrite the original ESN) & it said ESN write failed followed by my phone restarting. Once I plugged it back in, my ESN, MEID, and other codes where zeroed out.Is there anyway to restore it, because my ESN is showing up as zeros in my phone's settings and I'm trying to activate it with cricket. Thanks in advance!
View 8 Replies View RelatedI have lost iPhone 4S, hence deactivate or lock lost iPhone 4S using MEID of device?
Info:
iPhone 4S, iOS 5.1.1
if as a result of Android 4.3 upgrade to HTC One if they have made the vibration intensity less than before. The reason I ask is because I have been given a new model of HTC One (original one broke) but this new one's vibration intensity is rubbish!! Wasn't too sure if it was the phone or whether HTC had pulled down the notification intensity as it was really strong before.
View 1 Replies View RelatedI plugged my 4gs into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes...
Info:
iPhone 4
Locating the serial number, IMEI, ICCID, or MEID
Info:
iPhone 3G
So I just got the factory unlocked HTC One M8 from the website and so far I'm loving it. The only thing with me though is that I REALLY think the vibration intensity on this device is too high (or is it just me?).
View 7 Replies View RelatedI am having trouble with some things that I havent been able to figure out by now and this is my last resort where to find answers. This issue is really bugging me. After literally spending two weeks with my service provider telephoning most time waiting in witing for a call center agent to get connected to and being each time transferred to another division to a last being transferred to the divission where I first started at speak meoving in a cricle and no one being able to help me and this whole theater every day the same for two weeks, I am turning now to the people here hoping I could find some answers
1) My provider in Switzerland is sunrise (BIS), so I went on to the website sunrise.blackberry.com and entered my existing accounts, 4 of them. Additionaly I registered a new blackberry email address to be able to use the true push service which is xx@sunrise.blackberry.com (xx being just a placeholder for my real name). The problem is though that I haven't been able to find out the mail settings I have to enter into my Mail Programm on my PC so I can access the emails on my computer. I dont know if it's a pop server, an IMAP server and not to speak of the mail settings of the server settings for incoming and outgoing email. Since it's actually a BlackBerry server I figured that the servers are BB managed (no one at Sunrise Switzerland even knew what BIS is or that you could receive PUSH mail with the Blackberry email).
2) I tried to register a new email address at https://bis.na.blackberry.com/html for a direct xx@blackberry.com email address thinking that maybe with this, it would easier to find infos about the settings. The problem here is that I have to enter my PIN (no problem) and ESN/MEID number. The Problem is that I haven't been able to find those numbers now mather how hard I tried; they are not even listed in options>status.
After completing a workout, you have an opportunity to rate the intensity level from very easy, easy, difficult and very difficult. However, this does not get transferred to the [URL]dashboard.
View 4 Replies View Related1. While an SMS is received, is there anyway to make the phone vibrate more than two times? Let's say 4 times?
2. Make the phone vibrator to vibrate more strongly so that the incoming call is never missed.
I have just got a reconditioned iphone as my original one broke. It has got an apple ID email address on it which isn't my own. How do I delete that account and add my own account to the phone.
Info:
iPhone 3GS, iOS 5.1.1
My husband has smashed my iphone 3gs in temper the screen is totally shattered can I do anything with it
Info:
iPhone 3GS
Is it possible to change the color or intensity of the color of the directions in the Maps app on an iPhone 4S?
View 4 Replies View RelatedSamsung Focus won't boot past "Samsung" logo after it show the red bettery low sign. And i have charged it for more than 3 hours. And tried for so many times including held back&search while starting, but it still do not work. Just show the Samsung. What i need to do? Its there better way if i want to keep my information in the phone?
View 1 Replies View RelatedI've lost the 4 digit user selected security lock code which is required to reset the phone.Virgin says Samsung should help recover the code and Samsung says Virgin should help recover the code.A while back, I found a code on the web that allowed me to go into a service menu which listed among other things the lock code. I can't find any information on how to get back into that menu.
By the way, yes, I tried the last 4 digits of the phone number, 0000, 9999, 1234.If anyone knows how to get into the service menu on this phone
The only codes I've found so far are:##786# which gets into an info menu but doesn't have the lock code.##33284# which requires a 6-digit security code which I don't know.
I have a display problem with one of my two phone. When you power on the phone the Samsung logo appear and off after that but the phone boot up OK just don't have any on the screen, I can make call or receive OK. I disassemble both phones and swap the main board and find out that nothing wrong with the LCD Screen but the Main board. The phone have BK03 bin and I loaded with CB23 bin and it working good now.
View 1 Replies View Relatedi've been searching all over the internet for the userlock code for the Samsung Freeform III, it's not the one it usually is for MetroPCS. i would like to get into the settings and be able to download mp3's and images via the web browser, and even possibly tether via USB or Bluetooth. If anyone knows this code, or can help me figure out what it is. That would be great.
View 12 Replies View RelatedJust updated via Samsung Apps the camera firmware to a CDE11 or something version. Took 4 minutes to update and flash this firmware. I wonder what exactly it changed in the camera firmware? Hopefully improved things or bug fixes.I will test a few videos and see if the bitrate has changed or not.
View 8 Replies View RelatedIs there a way to program a shortcut or widget for the Record Audio feature in the Samsung Solstice? I have tried to no avail to find a way to do this. I want to take advantage of the feature, but as it is, I have to click menu, tools, record audio just to get started. Ideally I would love to have it available in the multi task button but I'm not hopeful this is possible.
View 1 Replies View Related