When creating a Custom Trigger and selecting "Wi-Fi network" I find the following Actions greyed out: Does this mean you cannot select them or are they enabled by default? IF they are enabled by default, why can't you save the Custom Trigger without selecting an additional Action.
View 3 RepliesWhy do we have to constantly keep our Wifi connection on thoughout the day for Locational Smart actions to work properly? Why cant we have Location in Trigger and Wifi(on) in Actions since its also using our GPS location to location us and Wifi for more accurate location?
View 2 Replies View Relatedprovide the ability to create a trigger based upon the presence of a secure network SSID (i.e. not one you are connected connected to )? I need to trigger an action when a secure network, for which I do not have the password, is detected.
View 1 Replies View RelatedAfter upgrading to ICS and being forced to do a FDR, I eventuallly realized my Smart Actions were no longer woking properly. I deleted them and was adding them back one by one. The ones that are not location-based work okay but I cannot actually get a location trigger to save. I press on Location, it shows me my one location I have set up right now, I select that one, press done to go back out to the smart action page, but the location value is not set. I tried clearing the cache, system and app, already but nothing changed.
I just realized I can set a location if I am not editing a sample action. Starting with a blank rule, it works but I still hae so save the action and then save the trigger.
I've just updated my Razr Maxx to ICS several days ago and ever since then the Location trigger I use for work is completely unreliable. It's constantly turning on and off all day long. I mainly use the smart action here to make sure my phone is automatically on vibrate throughout the day at work and I can't really rely on it at this point. Prior to updating to ICS it worked perfectly.I noticed you do not need to leave WIFI on anymore for location triggers to work, but at the same time I see wifi in my battery usage while wifi has toggled off. Is this new version manually turning on WIFI to determine location? I've tried leaving WIFI on and it doesn't seem to make a difference, it's still inconsistent.Also, I've already tried resetting Smart Actions to default and wiping out all smart actions and starting from scratch.
View 2 Replies View RelatedI was googling around the interwebs to find out more recommendations for smart actions rule settings, and I noticed some references to a motion sensor trigger (for example, in the BGR review of the Droid Razr Maxx). I don't seem to have that trigger in the version of smart actions on my new Droid 4, though? Is that a hardware sensor limitation? Or do I need to change a setting somewhere to make that trigger come up in the list?
View 4 Replies View RelatedSince the .893 update has come out and the smart actions app from the RAZR was not in it. Does anyone think we will ever be getting this app in an OTA? This is one app that seems like it is useful.This would at least be a little bright spot in my rather abysmal Bionic "experience".
View 6 Replies View RelatedI saw that there was an update to Smart Actions yesterday in the Google Play Store. When I tried to apply the update, I received a message that there was an error downloading the update. I could not get this message to clear, so I tried uninstalling the previous updates and then re-applying the updates. Now, I get the message "Your order is pocessing, your item will be available in a few minutes." I have cleared cache and data for the play store and rebooted my Droid Razr several times, but I cannot cleare this message. Anyone else experiencing issues with applying the latest Smart Actions update?
View 11 Replies View RelatedI have SmartActions set up to trigger when my location is home to turn on WiFi and turn off data. Similarly, I have a trigger when I connect to my Bluetooth in the car to turn off WiFi and turn on data.
The problem is when I am leaving the house but not going to the car. Is there a way I can determine that I am leaving my house or disconnected from my home Wifi so that I can turn WiFi off and data on?
I just noticed my SAs were wiped out with the update. Not a biggie but also not expected. I do see where they added some SAs and UI changes with the update.
View 7 Replies View RelatedI am trying to setup a rule with smart actions to look at the wireless i connect to as a trigger then change the volumes of the phone when it detects my work wirelessProblem is smart actions only allows me to change the ringtone volume i need to turn down the notification volume as weel but there is no option for this WHY?
View 1 Replies View RelatedHave just bought a new UK RAZR XT910. Have set up smart actions and have them enabled, but no matter what I do, disable, re-enable, delete, re-create, reboot, check DST time settings, nothing works.Can someone please tell me where I am going wrong.
View 4 Replies View Relatedi have the motorola razr uk version but my smart cations app wont activate / deactivate the profile when it should, im having to do it manually. its version 1.0
View 1 Replies View Relatedif you set something to happen on a certain Day between a certain time the phone just ignores the fact that it's the wrong day to perform that action and just looks at the time ?
View 4 Replies View RelatedBeen trying to set up some rules based on recomendations from this vid url...where they suggest using the Smart Action trigger for "Motion Detector" to save battery, and which looks pretty useful!However, I have a UK version of the RAZR and the Motion Detector feature does not seem to be enabled! Why is that? Is there a way of enabling it? Whilst I am on this topic I was also wondering if there is a way to restore the Smart Action Samples, as I managed to delete a couple of them accidentally.
View 4 Replies View RelatedFirst let me start by saying I had the RAZR and I used Smart Actions quite a bit to control certain functions. I then got the MAXX because well I wanted it.. and its massive battery. So, I updated to 6.12.173 and went to set up a smart actions and found that I could not find the Incoming Call Trigger.Now I had this bult on the orginal RAZR already, and I had updated the phone so I went back and it is mssing from their as well.
View 7 Replies View Relatedi found this page on the bb website[URL] but its not correct in that 'Message Display and Actions' does not exist under options. I tried to look around but couldnt find anything close.
View 4 Replies View RelatedI believe the switch that detects when the phone is opened / closed is barely working. I have opened the phone up and cleaned it, but the problem still persists. I like the V600 because it is quad, unlocked (im out of contract with t-moile) so I can swap sims and use it when overseas. I could renew the contract and get a free phone but I couldn't find any free flip phones that have quad on t-mobiles upgrade page.Suggestions on what to do? Replace internal parts or bite the bullet and pay for a new phone?
View 1 Replies View Relatedhow do I get the laps to trigger everylap either with GPS or at 4.2 miles?
View 6 Replies View RelatedTwo weeks ago, I was travelling to another country and inserted a different SIM and installed it's settings, but when I came back and installed the orignal SIM, I lost some of the selection options Network Destination for Exchange and OVI Maps only...Previously I could see different options under Network Destinations such as 'Data Package' and access points which I had connected to previously. Now I only see 'Internet' and this has only affected the two applications mentioned above. I also have Hotmail & Gmail which give me the other options so I find it strange why has this happened to Exchange and OVI Maps only (even after updating the maps application).
This is preventing me from using my service provider's Data Package connection for these apps. I've contacted the provider and installed the default configuration settings recieved via SMS but that didn't help
With my volume up anytime I browse or open anything the Xoom speaks what is going on. Seems like help for the blind. How do I turn this off?
View 5 Replies View RelatedI set up a Action in my XT910 with opening the WIFI at 0600 in the morning.It's OK to open the WIFI.But in the same Action, I also set up to start the mail, news and weather service after the WIFI option.It doesn't work for these three services to access/download the related data automatically.How can I modify this Action in order to start the WIFI and download the mails, news and weather service by itself?
View 1 Replies View Relatedi am not seen cellular data network options in my iphone 4s and i am unable to your gprs service from service provider please help and i also did not see the option for 3G?
Info:
iPhone 4S, iOS 5.0.1
I've just realized that the feature to switch / search for other wireless networks (for when I travel) is missing from my BB 8520. I am unable to scan for other Available Networks. Is there a way that I can restore that missing feature, and any other possible missing features?
View 8 Replies View RelatedAnyone know of a web site that lists Smart Actions that folks have created? Seems to me that this would be a great thing to share. I can see where the Smart Actions app could be very useful.
View 1 Replies View RelatedWhen I use my camera in panoramic mode the images that should auto take after the first image are too far apart. (Almost 90 degrees) This mode used to work with an earlier release of Android (2.2) but hasent worked since 2.3.4. Is there some setting I need to fix? Is this a bug with the camera app?
View 1 Replies View RelatedSo I noticed that my moto action (approach) stopped working on my phone.
I know some people hate this feature because it seems to wake up the phone unnecessarily, but in terms of impact to battery it's minuscule to none.
I actually like this feature because using the power button to wake up the phone seems rather inconvenient after having gotten used to the approach feature.
The problem is that it suddenly stopped working for me. I know that people are going to ask if I enabled this in the moto actions menu, it's definitely turned on. I rebooted the phone several times with it on and off. None of those measures have worked.
I have read as many threads as I can find, but I still have this problem. I delete all the Smart Actions and that works for a while, then it comes back again. According to Status, my system is up to date
View 3 Replies View RelatedSince the JB update, I can no longer use Voice Search when the car dock is open. Whenever I try pressing it, it tells me "This App is Unavailable."
View 4 Replies View RelatedI was just reading a press release about features the new Moto Droid Razr will have and they listed "Smart Actions", which is a very very neat feature.What "Smart Actions" does is enable the phone's user to set up certain conditions and situations that would set off specific actions by the phone. Sure, you can probably find a similar app in the Android Market, but isn't it nicer to find this app on your phone right out of the box?internal clock on the handset and the GPS, you can set your screen to lower the brightness by 20% at a certain time of day, or turn off the sound at a certain location. Not only can this function as a saver (increasing battery life by up to 30% according to Motorola) by turning on and off certain features at specific times or places, you can also use "Smart Actions" to make sure that your favorite website is up on the browser, refreshed and up to date when you get up in the morning. You can also set your not to ring while at a meeting. Motorola includes some preloaded and suggested rules to help get you started.
View 2 Replies View RelatedGetting a battery life increase with the smart actions app completely disabled. Before it was constantly running in the background even with no actions on so yesterday I disabled it completely and saw a very noticeable battery increase.does it really happened due to removal of smart actions app ?
View 1 Replies View Related