For the last few weeks, my workout overview no longer includes my custom zones. Each time I check my settings, the custom HR zones that I programmed are marked as currently active, but all my workouts are showing as the default zones set by Motoactv. These are not the zones that I desire to use in my training.
View 8 RepliesI have a question about using heart rate zones int he workout summaries. I went to "Set my Heart Rate Zones" and manually entered the five zones that I've been using for a while now, into a Heart Rate Zone Template.Then, when looking at a workout summary, on the left side I clicked the section for Zones-->Heart Rate. It displays five HR zones.. but they're not the HR Zones I entered myself. They're the stock/default zones. Therefore, when I look at the workout summary, when it shows how much of my running was done in each HR zone, the summary is incorrect.In the image below, where the arrow is pointing, how can I get it to show my custom HR Zones from the template I filled out?
View 6 Replies View RelatedHow do you remove custom pace zone and heart rate zones? I've created several that I want to remove.
View 8 Replies View RelatedI have attempted to set up custom pace zones, as well as edit exising. However, the numbers I put in change and do not reflect anything close to what I put in.
View 2 Replies View RelatedI noticed that after recent update I can not see heartrate zones summary on the portal anymore - the muticolored bar that indicates heartrate zone.
[url]...
I checked my OLD workouts on the portal and these DO have heartrate zones - which is strange since I would expect data processing to be on the page regardless of data used... here is link to OLD workout -[url]...
I've been using the custom workouts feature on Moto since the weekend. I have noticed that the custom workouts do not show up as the latest workout (my elliptical workout from Sunday is still showing as the latest). My custom workouts are also not showing up in the workout tab, neither in bar view nor table view. The only way I can access custom workouts on the portal is up top on the days of the week in the schedule. Is this a glitch with the new portal that is going to be ironed out?
View 1 Replies View RelatedI tried to set my pace zones and save it as a template but when i select the template it marks "10:00" in every zone (lower and upper) Is this a bug? How do I set my pace zones?
View 14 Replies View Relatedwhen I create a Workout my Heart Rate Zones are incorrect. I'm using the Custom Zones and have them set as Active. I created a workout and downloaded it to my MotoActv, but when I started the workout, it did the intervals correctly however the Heart Rate Zones were way too high. i.e., it had my Zone2 starting at 200 which is higher than my max heart rate of 189 so it wasn't effective in telling me when I was in the right zones. However, when I quick start a workout, it uses my correct zones.
View 1 Replies View RelatedI like the running Pace Zone Feature! It worked for me on the day I did a fit test. I ran 6 miles after the fit test and was able to take a glance at my watch and see the zone I was in. Very cool. I went to the website and tweaked my zones and saved a new template.I can't get the pace zones function to work since then. I'm sure it is operator error.
View 6 Replies View RelatedI see people posting workarounds on how to create pace zones (as an example) so settings will stick....I can't figure out how to create them in the first place....where would I input the data? The drop down only has "my zone templates" - and is not selectable. Am I in the wrong place?
View 11 Replies View RelatedAfter taking the Fittest i'm unable to select the Carmichael Training Zones as my default.
View 9 Replies View RelatedFirst, I'm unable to save a zone template. If I edit the Carmichael zones and hit save, it tells me that's it has saved the template. But alas, it's nowhere to be found. Also, after I hit save the zone resets back to the default (which is incorrect as it has the first two zones overlapping significantly). Take a look at the attachment. I'm no heart rate expert by any means, but are "Recovery" and "Foundation" supposed to overlap as much as they do (why are both of their lower number 87?)? Just looking at this now I realize how little sense it makes. Why does the "Foundation" zone go all the way into "Steady State" I tried changing this and it just reverts back to the original everytime. I'm sure you'll guess my next gripe... yep, my zones are incorrect on my MotoACTV as well.
View 10 Replies View RelatedI have 4 zones setup in my pace zones: rest, walk, run, sprint.
I am trying to setup walk / run intervals at 2 minutes at my "walk" pace zone and 2 minutes at my "run" pace zone.
In the workout planner I am able to select the appropriate pace zone when setting up my interval workout, but the pace zone that I selected is not saved. I click save and re-enter the workout plan and the zones are defaulted back to my first zone of "rest."
After using the coached interval feature a couple of times, I have noticed a problem. Once my other workouts are synced, the table in the heart rate zones tab shows the total number of minutes spent in each individual heart rate zone. This is not happening with the programmed interval workouts. I know my zones are being recorded because of the feedback I get during the workout and the color coded graph portion seems to be accurate. The table on my recent 25 minute interval workout reads 1:55 in Z2, 2:32 in Z3, 0:36 in Z4, and 0:00 in both Z1 and Z5. Clearly these durations do not add up.
View 14 Replies View Relatedfind it hard that you can't create custom playlists from the watch! Plus when pushing the fitness icon it shouldn't only allow one song! That's just pointless! It should be where you choose a set of music as your fitness music!
View 4 Replies View RelatedI wanted to add snowboarding as a custom workout
I would be interested in getting stats on speed and calories burned etc.
The custom workout that I did for weight training does not show up when I look at the "Recent Workouts" view. This still defaults to the original workouts. I have updated my profile to include the custom workout 1 as weight training. How do I get this workout to display in the "Recent Workouts" view?
View 12 Replies View RelatedI plan to use this device for activities other than just the 5 or 6 activity types listed - for example - monitoring heart rate and calories burned during strength training or other types of cardio activities. Is there any way to create a custom activity type - or if not, can you add a few more generic ones? ...perhaps "Other", "Cardio", or "Strength"?
View 4 Replies View RelatedAm I missing something? Is there a method to select custom dates for the Recent Workouts? I'd like to see all of March's runs with total milage, etc...but I can seem to figure that part out.
View 1 Replies View RelatedI synced up my run wirelessly and on the watch it says it successfully completed. I sign on to the website, and I notice the new splash screen (portal update?) and my run is not on it. I can't even view the runs at all. Anytime I click on past runs, it just has those new screens telling me all the cool things portal can do.
Is this because of the updating? I'm on 1.7.3 N8, and new motocast software too.
I like my MOTOACTV, just want some type of clarity on problems. I'd rather see a "site down for a scheduled maintenance" than not being able to do anything on the site.
I recently bricked my Nexus 5 after attempting to load one kernel over another (I know now that what I did was stupid) and I'm now stuck in a bootloop. I believe I'm running on 5.1.1 and have no custom recovery anymore.
View 5 Replies View RelatedI'm having an issue with my workouts not showing up on the website....after the sync, my workouts are erased from the device and don't show up anywhere. The device works great while I workout, but deletes the workouts when I plug the device in to sync.
View 2 Replies View RelatedJust completed a run this morning and went to see the data. The route map does not appear at all. I went back to previous workouts and the maps are all not appearing.
View 15 Replies View RelatedIn the last few days, my Motoactv shows now steps or calories on the watch face. In addition, when I start a walk, the steps remain at 0 even when using the GPS
View 4 Replies View RelatedI'm a little concerned about the calorie counts it's been giving me; they seem too high. Has anyone else had this issue? Could it be my unit, or was I just underestimating my calorie burn before?
View 6 Replies View RelatedI purchased a new bike, and changed the setting default profile for cycle to MTB2, and I changed the tire size 29 after I noted the problem after the first run that the ACTV was set to the default cycle, (I guess) but since I started riding this bike the milage and mph have been off, the first ride was showing I think it was 22 miles, it was on 1 apr 2012, you can check my workouts, but we really rode about 27 miles. Today I rode exactly 22 miles and it was showing a little over 20 miles?
I hope I've missed something in the settings, I can't use this if its not accurate, plus I used it for 1 hour and 45 minutes today and the battery was almost at 0%? This is a problem considering that I will be doing 100 miles rides, which can take several hours.
On my Goals tab, I have the following information: Since February 24 you have run for a distance of 6.32of 12 mi.
View 2 Replies View RelatedI just got my nice new iphone and have found trouble putting custom ringtones on. i can succesfully sync 1 ringtone (yes its 29secs long acc format with .m4r ending). In my itunes ringtone folder i can see the 3 ringtones i have put on there so far yet when i go to settings on my iphone only one shows up, not the multiple copies others have experienced. im using itunes 9.0.3 and have iphone 3gs 16gb version 3.1.2
View 24 Replies View RelatedDid a running fitness test this evening and it gave me the audio prompt that I'd completed it. Its showing on the portal as having been completed, but its still showing on the watch as planned even after I sync'd.
View 1 Replies View RelatedSo basically, for no reason (no update, no restart of the device), my Nexus 5 does not show my music in Google Play Music, and my Ringtones/Alarms/Notifications that I customized do not work too (and they do no show in the list when I try to apply parameters).
No file has disappeared:
- Music is in Nexus5 > Internatl Storage > Music
- The rest of the stuff is still in Nexus 5 > Internal Storage > Ringtones, or Alarms.
Everything is here right at its place. But nothing works as before. I tried to restart the device, but no. I tried to empy cache/clear data/force stop of Google Play Music, but no. I did the same with the Media Storage app, and it did not work too. I got all the files out and back with other names, but no.
Moreover, since I forced stop of Google Music and relaunched it, now my library is polluted my dozens of songs and albums that I suppose are automatically put here as a "try it" thing, but I don't want them appearing at all, even more in my small library (okay, right now, nothing would appear I know).
I have iPhone 4 and I was using the Hot Spot feature for my iPad 2. It was working yesterday and when I tried do to with again this morning the Hot Spot option was not there anymore...I already tried to reset all my setting and it not work.
Info:
iPhone 4, iOS 5.0.1
