I am unable to charge my E815 (supposedly charge port bad). They say if I get a new battery, it has to be charged first, so that's no good. How about using a usb cable or is that thru the same port and wouldn't work either?
View 2 Repliesleft charger plugged in airport at start of int'l trip. Is it possible to charge a Xoom using the USB port on a laptop?
View 3 Replies View Relatedconfirm if I am meant to be able to charge my Razr Maxx from a computer usb port?I have tried an HP laptop (4 different ports), a Macbook Pro (2 ports) and an Imac (3 ports).When the phone is on, it says its charging but does not seem to increase charge. When out of battery I just get white led light.
View 12 Replies View RelatedIs there a tool which can change the ESN via software on an E815? I am replacing mine and I have some working main boards and lots of parts. I want to set the ESN to the same as the original one so I can swap boards at will without going to Verizon. My phones get rough service and 815s are still pretty good and really easy to work on once properly flashed and seemd, except when they wear out or otherwise break.
View 10 Replies View Relatedoffloading pictures from my Motorola E815. I have been searching for solutions to remove photos stored on my phone.
View 1 Replies View RelatedI cannot charge my x6 through USB port.
View 1 Replies View RelatedMy Storm 2 stopped charging with the wall and car adapter, but will charge with the computer using the USB port. I replaced the battery, but still no change.
View 7 Replies View RelatedFor the past month or so i have been having to charge my iPhone 4 from my USB port in my computer. I have bought new wall chargers and car chargers, and even tried a few friends chargers and they will not work on my phone what so ever. I can use the same cord from the wall adapter that will not work, and plug it into my computer and it works perfectly.
Info:
iPhone 4, iOS 5.1.1
I used the Verizon update (*228) today on my E815 done this many times prior with no trouble. After the phone rebooted, I tried making a call.Signal bars all went away and the call would not connect.I then tried power-cycling the phone; same problem.Tried enabling Test Mode, forcing CDMA mode, still won't place calls.I'm limping along on my old LG VX4600 good thing I kept it. Is there anything I can do to fix my E815 (change firmware/PRL manually)?
View 3 Replies View RelatedI have an E815 that if set on Vibrate or Silent, when the charger is plugged in, it will change to LOUD. Is there a way to have it retain whatever ring style it is set at when the charger is plugged in?
View 1 Replies View RelatedI have a Motocaddy golf trolley with a USB port for charging devises but my Blackberry 9860 will not charge.Message is that battery source will not charge the devise.
View 1 Replies View RelatedI got my S6 the week it came out, so I've had it for a decent amount of time, without any problems until last week. One day I experienced a sharp battery drain, and plugged it in my PC to charge. To my surprise it wouldn't charge! It shows that it's charging, but it wont go up in charge. The only way to charge it now is with its own fast charger. I fiddled with it a bit, (cleared cache, uninstalled apps, etc. ) and I can say the battery drain problem seems to be fixed for now. But I'm still unable to charge it up via the PC (or a laptop) USB port.
View 6 Replies View RelatedI was able to charge my lumia 900 with my car (Toyota Prius 2010) USB until the latest firmware upgrade. Only catch was to use original cable came along with phone. It didn't accept any other micro USB cables. But after the latest update even the original cable doesn't work! All the cables works well to charge the phone when connected to laptop. I am having hard time using it as i frequently travel.Ideally i should be able to charge with any micro USB cable in the car. Could you guys suggest any workarounds or fixes?Not to mention my iPhone was perfect in USB recharge though it is a slow recharge.
View 8 Replies View RelatedPhone still under 1 yr warranty, Bell store was less than accomodating when asked to fix or replace.
View 2 Replies View RelatedSeveral flashing attempts failed. Now i'm stuck in the "bootloader usb init" screen.(but thats another problem i'm trying to get help with in another thread.)I started with a fully charged good battery, but after hours of trying to get this thing back into verizon by flashing it with VRZ_E815_01.1E.0R_PRIii09574_MONSTER_01.shx , i believe i'm outa juice, well the battery is.So I plugged it in the charger, it's still in the bootloader mode and on! Now.It's been about 4 hrs, but the phone still turns off after displaying 'hello moto' for 1 second(when charger is unplugged), which make it impossible to try fixing the flashing problem.
QUESTION:
How do i know that/if the battery is charging while in the bootloader state?.. or is this phone turning it self off, not a battery problem at all, but has something to do with the failed flashing... a dead phone?
I have a Motorola E815 CDMA phone that was originally a Verizon postpaid (not mine) which my son then used for a while as a PagePlus prepay. It currently has no service, and I'd like to do a Master Reset but I never knew the security code. I thought that when it was activated on PagePlus the security code would revert to 0000 or 1111 but it didn't.Before I invest in a data cable, I would like to know if I can get this using BitPim.
View 1 Replies View RelatedSo, the inevitable has happened and my Bold won't charge through the usb port anymore. I don't have a warranty, and I'd like to attempt to fix it on my own. I'm planning on ordering it form sw-box.Thing is though, I don't know how to replace the port.Do I have to desolder? has anyone ever done this before? Any help/feedback will be appreciated.
View 6 Replies View RelatedI damaged my usb port on my Samsung galaxy s5 phone. Before getting it serviced, can I just purchase a wireless charging cover and pad and charge it that way? Since nothing is being plugged into the actual port, it should work right?
View 2 Replies View Relatedi am new to the forum and do not know if my question is relevant to this forum
I have a motorola Iusacell e815/e816 the problem is that I have no light on the phone screens, the outer window has all the data but no light, and in the main window, it stays locked hellomoto logo, receive calls, I make calls, send SMS, MMS, etc. but I can not configure anything, that could be happening.
finally, with USB-2Go, I can find valid reason to upgrade from N70. good pixel camera, ability to browse files from external drive, and HDMI out. Well my question is, is the USB2Go port seperate from the HDMI out port ? If yes, does it mean I can use the N8 to browse my external drive and play video thru my HDTV ? So Nokia N8 can be my full fledged media center, radio player, camera, phone
View 5 Replies View RelatedAccording to my IT guy I need to get my phone to pull emails out either on port 995 for SSL POP3 or on port 993 for SSL IMAP. My phone errors out when I setup the account through the phone. Koodo does not allow setting it up through a browser. They say the server I have used my 8830 on for years is not compatible with my new 9360 and that it is a Blackberry problem!
View 3 Replies View RelatedMy i1 has developed a few issues and has to go in for service. Dude says all HE can do is backup my contacts.... I need to backup my apps, settings, widgets etc .... in other words the WHOLE enchilada. Any suggestions as to Motorola or aftermarket software ?
View 4 Replies View RelatedI have a Canadian Xoom updated to 3.1, When I plug the usb into my laptop I see MZ604Device Storage - no SD Card. I have an SD card in the device which I can see when I access the 'Files' app.
View 5 Replies View RelatedI've had my Defy for a little more than a year...but I'm "stranger in a strange land" here in the forum, mostly because I'm neither techie nor anything close to a power user. But I do not use any of the Motoblur junk...and don't even want it on the phone. The only time I'm aware of it is when I check the list of running apps and see how many of them are Motoblur related. I'd love to be able to delete them, if only to get rid of the power drain they represent. Yet I suspect that Motorola has them all pretty much "hard wired" into the phone. Or is there some sort of less obvious, less intuitive way to get rid of the Motoblur news, weather and other crap?
View 1 Replies View Relatedanyone know a good way to free up some memory and/or stop default stuff from running? when i first boot it load with approx 101mb free, once fully loaded im down to 86mb free. id like to remove/disable some of the stock apps and such that i will NEVER use, but ALWAYS seem to be running.im rooted and have RootExplorer if that helps any?
View 1 Replies View RelatedIve noticed that alot of stuff is running slow, ive pulled the battery and still the same, went into the running apps under settings and over half the ram is free, i thought it was supposed to be dual core, although it wasnt like this before the update
View 1 Replies View RelatedAfter reading about this, I was redirected to down-load a driver so that my PC could charge the EM 330 battery though a USB port. However! There are TWO drivers and the instructions say, choose the one for your phone! There is no indication which driver would be associated or appropriate for my phone! Since I was directed there beginning with questions about the EM330, can I ASSUME that BOTH will work or then which one do I choose to install on my PC ?
View 1 Replies View RelatedHas anyone had trouble inserting the USB lead? I.e. when it catches the socket housing. Was concerned I forced the female socket a little too hard. Then noticed later that the USB socket edge is deeper than the HDMI socket. No longer flush with the edge. Just concerned about internal damage.
View 2 Replies View RelatedFixed other issues, now I need to replace charging port. I have an extra and a soldering gun. Is there any tricks I should know, or just be careful?
View 2 Replies View RelatedMy Motorola V188 will not charge via USB port. It works fine with AC adapter, but I'm going overseas, and my AC adapter is 110v only. The logical way to charge is through the mini-USB port, but the manual says it needs drivers for that.They have two download options for drivers to allow charging. Neither one of those will install -- they do not match the device.Why did they make this so difficult? Does anybody have ideas how to get this phone to charge via USB port?
View 1 Replies View RelatedI find it unacceptable of the undersized 2 mm power port Moto engineered into to Xoom. According to Wikipedia, 2 mm x 0.5 mm size is to be used up to 3.15 v only, pretty sad the Moto refused to comply with EIAJ or DIN standards.http://en.m.wikipedia.org/w/index.php?itle=Coaxial_power_connector&mobileaction=view_normal_site The only reason they did what they did is for selfish reasons, so they are the only ones to sell the overpriced non-standard accessories. According to Wiki, we should be using OD 5.5 mm and ID 3.3 mm plug. Moto should be required to fix any broken port any time. I will not buy their chargers, because of $ and no 90° plugs. It's only 12 v for god sakes, straight from the car port. By the way the nearest standard size plug is 2.35 mm x 0.7 mm, not Moto made plug!
View 11 Replies View Related