Is there a tool which can change the ESN via software on an E815? I am replacing mine and I have some working main boards and lots of parts. I want to set the ESN to the same as the original one so I can swap boards at will without going to Verizon. My phones get rough service and 815s are still pretty good and really easy to work on once properly flashed and seemd, except when they wear out or otherwise break.
I used the Verizon update (*228) today on my E815 done this many times prior with no trouble. After the phone rebooted, I tried making a call.Signal bars all went away and the call would not connect.I then tried power-cycling the phone; same problem.Tried enabling Test Mode, forcing CDMA mode, still won't place calls.I'm limping along on my old LG VX4600 good thing I kept it. Is there anything I can do to fix my E815 (change firmware/PRL manually)?
I am unable to charge my E815 (supposedly charge port bad). They say if I get a new battery, it has to be charged first, so that's no good. How about using a usb cable or is that thru the same port and wouldn't work either?
I have an E815 that if set on Vibrate or Silent, when the charger is plugged in, it will change to LOUD. Is there a way to have it retain whatever ring style it is set at when the charger is plugged in?
Several flashing attempts failed. Now i'm stuck in the "bootloader usb init" screen.(but thats another problem i'm trying to get help with in another thread.)I started with a fully charged good battery, but after hours of trying to get this thing back into verizon by flashing it with VRZ_E815_01.1E.0R_PRIii09574_MONSTER_01.shx , i believe i'm outa juice, well the battery is.So I plugged it in the charger, it's still in the bootloader mode and on! Now.It's been about 4 hrs, but the phone still turns off after displaying 'hello moto' for 1 second(when charger is unplugged), which make it impossible to try fixing the flashing problem.
QUESTION: How do i know that/if the battery is charging while in the bootloader state?.. or is this phone turning it self off, not a battery problem at all, but has something to do with the failed flashing... a dead phone?
I have a Motorola E815 CDMA phone that was originally a Verizon postpaid (not mine) which my son then used for a while as a PagePlus prepay. It currently has no service, and I'd like to do a Master Reset but I never knew the security code. I thought that when it was activated on PagePlus the security code would revert to 0000 or 1111 but it didn't.Before I invest in a data cable, I would like to know if I can get this using BitPim.
i am new to the forum and do not know if my question is relevant to this forum I have a motorola Iusacell e815/e816 the problem is that I have no light on the phone screens, the outer window has all the data but no light, and in the main window, it stays locked hellomoto logo, receive calls, I make calls, send SMS, MMS, etc. but I can not configure anything, that could be happening.
it seems as though the edit avatar function will.well..not let me upload my own avatar. LOL, and when I go to search for a picture of the Milestone there are like 476 pictures for Motorola, and it would take a LONG time to scroll though those..So, how do I upload my own avatar?(Or what Page # is the Milestone/Droid avatar picture on?)
I just got this phone, and the ringtone won't change. I went to 'Sound' 'Phone ringtone' and I select the one I want, and it selects it okay.. but when someone actually calls, it has this annoying voice saying 'Home is calling' or something like that. It's kind of hard to make out what it's saying, so I find it really annoying. I also put my own music on, and they're not coming up on the list of ringtones.
PS. Does this phone take a while to dial out and recieve calls? I tried calling myself and it took about 10-15 secs to actually hear it ringing.
I want to change my screen name on the MotoActv website. How do I do this? When I go into settings, it doesn't allow for this, only things like height, weight, password, etc..
I'm having a devil of a time trying to figure out how to change the way Electrify vibrates.I would like to set a different vibrate in silent mode for calls versus text.I thought there was a way to do this, but I'm not finding it.
I got my atrix 2 yesterday and it was set up in Erie PA at the Best Buy and when I post things to FB or my weather widget, it says I'm in Wesleyville PA which is not too far away but far enough to make a difference. How do I change this? I've trashed the widget and now just use accuweather but the FB posts are irritating me.
I have had my Atrix 2 for two weeks now. But ever since I have been at work. Now im actually getting a chance to play with it. So far only a couple of questions. On every font I have (widgets, text, email, home screen), It shows up as a cursive type. I thought when you purchase a phone it is bold normal type. change this font back to regular bold style. How do you have defualt or normal font? This cursive style is way to hard on the eyes for enjoyment.
I am from Canada and purchased a USA Verizon Xoom 3G. Bell and Telus seem to run on the exact same network, but I am unable to get things up and running with them as the Xoom just cant "activate". The neetwork providers are asking if there is a way to change the APN setting in the Xoom as it appears to be searching for the Verizon Network.How can you do this as my Xoom only has a Home/Automatic setting under Mobile. There does not appear to be any manual setting
I have a Atrix HD. The app used to mostly work, now I'm having major issues. Everytime I try to change any setting, the app crashes and I just get a message "Unforunately, SmartActions has stopped."
There a fix for this so that I can make changes or this app is no longer supported?
When I go to change wallpapers (using the stock ones, not the gallery or live) only the Stock X one shows up, when I scroll through the default ones it doesn't change to the one selected. The stock X one always displays in the preview, even if I scroll to another. If I select one other than the other and click "set" it won't show until I reboot the phone
I live in South Korea, and when the phone installs MOTOCAST, it is in Korean. When I download the MOTOCAST client from the web, it does an IP autodetect and installs the Korean client. As far as I can tell, and I have done a lot of probing, I cannot change the language of the program in the system. There doesn't seem to be a primary options menu at all. My Korean is pretty bad, and this makes this valuable program difficult to use.
I'm struggling trying to figure out how or if it is possible to change the application permissions on the Motorola VA76r. I use the GMail app, and each time I press refresh it asks me for permission, and gives instructions on how to change them however when I try to change them I'm unable to. The only options I have are to ask, or not allow access at all, the rest are greyed out.
I just picked up an android balze. I was wondering if anybody knows how to change the keyboard to the number pad? The current keyboard makes it very hard to text message.
I'm using a Motorola W385 and need to know how to change the way you answer a call.Right now when it rings the phone number shows up on the front, (when closed). When I open the phone it automatically answers the call. I want to change it so I can open the phone and then push "any button" before answering. I thought I read it in the users manual but now I can't find it.
1. How do you change the personalization on the lock screen. It says, "This Phone Belongs to." How can my wife put in her name?
2. When my wife has her phone plugged into her laptop, a green light comes on, and the phone does not turn on when she hits the button, nor does it charge. Can anyone explain this to me?