After an attempt at upgrading, my Bravo now shows only a black screen with the small white bar at the top. I can receive calls, but that's it. I thought there was a discussion of this problem here, but I can't find it. Any way to get back to normal without losing home screen setup?
View 2 RepliesI am at the 2.2.1 level.When I "power-up" my BRAVO from a standby state, the "contacts" or "dialer" screen appears without any request from me. When I touch the "revert" button, the screen goes black except for the notification bar.I then need to hit the HOME button to get started.Is there some parameter that controls what "starts up" on wake-up?
View 2 Replies View RelatedI just download software upgrade for my bravo and now all I get is a blank screen. I have taken out the battery several times, yet I can't do anything.
View 1 Replies View RelatedJust recently my pc began having a problem recognizing my Bravo as a phone. Until then everything was fine.Now when I plug my Bravo into a USB port, I hear a chime, but no window opens.When I go to My Computer, the phone is shown as Removeable Disk (X:).When I double click on it, a small window opens with this message: "Insert Disk.Please insert a disk into drive X:." Under properties, it appears as Motorola MB520 USB Device, a disk drive.After plenty of research, I have tried changing the assigned letter of the drive twice.Every other USB device I own works just fine on my PC. The only way I can access the phone on my PC is to turn off the pc, connect the phone, power on the pc, and then the phone appears as a phone. When I connect the phone to another pc, the phone appears as it should.Some research shows this problem may be related to Acronis on my pc, but another pc with Acronis on it can recognize my phone. Could this be the result of disconnecting the phone without "preparing" the disconnect?
View 5 Replies View Relatedsetting up a Bravo MB520 to work correctly with Consumer Cellular Service. Which fields have to be set up to make the Data work? Is there a good guide to explain all the software in setup for instance? Or how do I get an unlock code to get the phone away from other networks?
View 1 Replies View RelatedI can't get my Bravo to work with an FM transmitter. I have tried several transmitters and all I get is silence.
View 8 Replies View RelatedI'm not getting my hopes up, given the short life of the Bravo, but the Atrix just got upgraded to Gingerbread (Android 2.3.4)/Blur_Version.4.5.91.
View 2 Replies View RelatedScreen sleeps when i have it at certain angles. like its equalibrium is jacked up? xprt? no major damage i know about, but fustrating sometimes
View 2 Replies View RelatedMy Bravo got stuck at the Motorola Screen. I tried to VOL/POW button at the same time but that leads me to no where. Every 60 seconds, the Motorola logo flashes.
View 3 Replies View RelatedAfter I updated the software, my phone will randomly restart itself. It will go to a black screen, then reboot on its own. I have tried two refurb phones from ATT and a new battery, and it still does it. I even got a new SD card, thinking that maybe it was a memory issue. Still restarting.Is there a solution (besides just buying a new phone)?
View 5 Replies View RelatedAfter the update to 2.2 I can no longer disable the screen lock "slider". Has any been able to get it to work like it did in previous versions? I do not want to have to use the slider everytime the phone sleeps.
View 8 Replies View RelatedI upgrade my firmware but when i was finish the phone was black.The only thing that happens when i press the start button is that is vibrates a little.Otherwise is "dead"
View 8 Replies View RelatedSo basically. I soft reset my phone and the screen went black (normal), but the led light just kept blinking. I thought maybe because of the upgrade it needed more time or something. So I decided to leave my phone and go get ready for work thinking by the time I'm ready to jet, it would be up and running. 45 minutes later, Nothing. Still black. Still blinking. So I did a hard reset which worked just fine. But I had to soft reset my phone again (why? the alerts sounds stopped working...resetting it makes them work again)....but same deal: black screen, blinking led. Is soft reset just dead now with the new upgrade?
View 1 Replies View RelatedSo I recently have been having problems with my phone and its screen not turning on. Its the original droid and I guess alot have people have had this problem. But I am at a fork in the road:(this is the thrid time the screen has done this)Last night I went to check my phone and it appeared to be off, my power button does not work so I have to plug it in to turn it on. But the charger light was on so that meant the phone was already on. the buttons lit up still as well. Being this is not the first time I took the battery out for about an hour and put it back in, plugged it in, and still nothing. The M sign that comes up when you first turn it on doesen't appear and neither does anything else on the screen. But when i recieved a call I could answer the call like the screen was working but still was not on. I left the battery out all night from 8pm-6am and still nothing but i can still answer the calls. Left it out until 2 this afternoon and still nothing. I have no idea what to do.
View 5 Replies View RelatedI've discovered a really annoying bug with the text messaging app where I'll find that it will have scrolled all the way up to the top of the thread at times which is really annoying.
I have been trying to recreate the problem and the last time it was doing it was when I came out of being locked straight to an SMS thread and it will be at the top. I could scroll all the way back down and if I angle the phone so that it switches to landscape, then back to portrait it will then go back up to the top of the thread.
Has anyone else ran into the annoying problem of ending up at the top of an SMS thread when you didn't want to?
after update on my bravo i had a lot of issues, so i did a factory reset and seems to run fairly well now. My android system is running at 100% and im not quite sure what to do?
View 3 Replies View RelatedI installed the drivers from motohelper but when I enable the tethering function on my phone the motorola usb networking driver changes to motorola usb RNDIS device and it shows not working (the motorola usb modem disappears from my device list) . my network notification shows I'm connected but internet explorer doesn't find any pages. my system is dell lattitude d600 running windows xp
View 1 Replies View RelatedI would like to set my screen to not time out/go black while I am connected to a charger.
View 2 Replies View Relatedthe lock screen is almost all black. i want to see my wallpaper not hide it.
View 1 Replies View RelatedIt does it when I am working out listening to music through Bluetooth headset.
View 2 Replies View RelatedToday suddenly my motorola droid razr screen went black. i can see the notifications tray on the top and am able to slide it down. the 4 button on the bottom also don't seem to work except the back button. if i press them longer then they seem to respond. i have restarted twice already and even reinserted the microsim but no change. i got the device 4 days back.
View 3 Replies View RelatedBought new Android Bionic on Sep 8. On Sep 9 on two occasions, screen went black. I had to remove and reinstall battery and boot to restore service.
View 15 Replies View Relatedi bought Motorola Razr XT910 from local reseller. though i am very satisfied from this great handset but i have a manufacturing defects. i have black spots on my display in black background which only show up when watched closely in very dark environment ie in night. i obeserved them almost after 5 days of my purchase and are very rare in daliy use. i researched on web and it is a common poblem with this handset and others with amoled screen but my spot decresed and have changed there position. i am big motorola fan and i have used cellphones from different make and build which include iPhone HTC Hero etc and witnessed various issues and defects in each of them.
View 1 Replies View RelatedIs it possible to export bookmarks saved on my Motorola Bravo to my PC
View 1 Replies View RelatedI am trying to upgrade my bravo manually by checking system updates.But the process is sticked in the "checking for available update...." screen.
View 3 Replies View RelatedThis is getting very annoying. I've been able to silence Notifications in email, and some other apps.
But there seems no way to silence Notifications in the general menu. That is, Notifications in Settings. "Silent" is not a choice.
My droid A855 shows a lit up black screen when powered on. When it finishes powering on, its still black. The Motorola logo and the droid eye don't appear while its powering on either. Now I can raise the volume, receive messages and phone calls, I just can't see the images at all; its all black. The back, home, menu, and search buttons at the bottom of the screen still light up white and work as well as the keypad. I turned it off and on and took out the battery about 8 times. I never dropped it or got it wet. I've had it for two years already so I guess the warranty is up. It just randomly froze and went black while i was texting my friend.
View 1 Replies View RelatedAfter unlocking and entering my password, the top drop down menu jumped to the bottom. The menu accessability was still functioning from the top, however the entire screen shifted up. When I try to tap an app in the new, offset position, it will select the app below the one I am going for, suggesting that the digitizer is okay. When this shift happens, I press the lock button twice, swipe to unlock and it is good as new.....at least for a while. Now, there are times that, when I press the unlock button, there is only a black screen that lights up. I then press the lock button until my unlock screen appears.
I am running 2.1 and this was a replacement cliq, as my original took a swim in the terlit
I haven't used my original Droid in about 2 months. The last time I used it, no problems. Booted up, used it, shut it down. I go to turn it on, and nothing... to be expected, dead battery. So I think I charged the battery. The charging light turns on. The backlight turns on, and that's it. It just stays like that. It either automatically does that when I plug it into a charger (car, home, or usb on computer), or if its unplugged, when I push the power button. Other than a black screen with the backlight turning on, I get nothing.This is not a stock rom on this phone. It's been a WiFi/Bluetooth toy for about a year now.I've tried powering it on while holding the "X" key, and it doesn't get me into the boot loader, just the black screen.
View 4 Replies View RelatedGot My Defy 2 days back. Last night it rained heavily and I had to walk from my office to home. It was a 30-35 minute walk. I put my Defy in my pocket and started walking thinking its a water proof phone. When I reached home, first the phone's screen didn't respond to any touch. After a minute it went completely black and I could see heavy moisture under the glass. Only sensors were throwing some colored lights. I tried to call from my friend's phone on my number, and I could listen to the ringtone only. I could not pick up the call since there was nothing at all on screen. Today I put the phone in rice for around 8 hours still the condition is same. Its very unfortunate that I could use and explore my phone properly even for 2-3 days.
View 4 Replies View RelatedMy phone used to keep a charge for THREE days...it was wonderful! Now since the update, I have to charge it every day even if it's just standby. Plus, if I'm on a call with the screen turned off, when an incoming call comes in, I am unable to turn the screen back on in order to answer. Plus, sometimes the phone is so sensitive that when the face is pressed up against it, it goes haywire and cancels out a call. The sensitivity is way too high. I am using Straight Talk as my provider so is there a way, I can remove all the AT&T stuff? And which ones do I not need? I don't like a lot of bloatware on my phone.
View 1 Replies View Related