I really like the Lumia, but I am really disappointed that I have been unable to print to my wifi printers at home. For the time being I am emailing my things to print to my iPad and then printing from it. Any way to actually print from the phone to a wifi printer directly?
View 7 Repliesjust upgraded to windows 10. WiFi does not turn on, have cellular signal but no data. so i cant even update if there are any new updates availabe.
View 1 Replies View Relatedtotal smartphone newbie here, seriously considering the 1020 but had a quick question. If I want to use my wifi instead of cell data, is this the correct setting?
Defining Internet Connections:
On the Start screen, swipe left Tap "Settings" Go to "Wi-Fi" Make sure that "Wi-Fi networking" is enabled Select the connection that you wish to use
To use a mobile data connection:
On the Start screen, swipe left and go to "Settings" Tap "cellular" Switch "Data connection" to "On"
Starting just in recent days, whenever I try to connect to a WiFi network I get the message "Can't Connect. The WiFi network <network name> didn't respond. Try again later."
Other devices, including other Windows Phones, are connecting to these networks no problems.
I have a black lumia 1020. During the initial set up after I press 'next' from the welcome screen I am afterwards asked to sign into my MS account. It does not ask me to first connect to a wifi network. Due to this I can't sync all my backed up information. I know with my lumia 920, out of the box with no sim card inside I was asked to connect to wifi before being asked for a MS account. Is this an issue with the lumia 1020, not being able to sync with a back up file?
View 11 Replies View RelatedLumia Black seems to be availible for me, but it wont download because it realy realy wants to have a Wi-Fi connection. I dont have one in my house, and public wi-fi's are slower than my mobile internet so it's gonna take ages. Is it possible to update your phone without wi-fi? In FAQ on windowsphone.com it only recommends to have a wi-fi and doesnt say it's necessary.
View 24 Replies View RelatedMy lumia 1020will not connect to my network. Yet my old 820 will. Same password same network....
View 1 Replies View RelatedSo my Nokia Lumia 1020 was upgraded to 8.1 via Preview for Developers a few months ago and Wi-Fi/Cellular data was fine. I updated to Lumia Denim at one time and for some reason, Wi-Fi did not work. I tried using the Windows Phone Recovery Tool 2.1.1 and Wi-Fi still did not work. Then I downgraded from Denim to Cyan, and Wi-Fi still didn't work. I tried the Windows Phone Recovery Tool (same version) again, and Wi-Fi did not work.
In addition, I tried adding my Wi-Fi as a hidden network. Still didn't work. By the way, my Wi-Fi is WPA2-PSK, and I have AES encryption.
So here are some specs of my Lumia 1020:
OS version: 8.10.14226.359
Firmware revision number: 3051.50009.1451.1001
Model: NOKIA 909
Carrier: AT&T
Software: Windows Phone 8.1 Update
I want to get either the 1020 or the 1520 but they are at&t exclusives. Can I get a lumia 1020 or 1520 without a plan and use it WiFi only like an iPod touch. Is a sim required during the start up process? If a sim is not required, will I be able to use all the preloaded apps and get updates even if it is not activated with a wireless network?
View 10 Replies View RelatedI have to reconnect to home WiFi, including reentering password, whenever I'm back in range.
I have system set for auto reconnect but that doesn't seem to be working obviously.
Just got 1020 today and I cant sign into home wifi. My 820 does with no problem ....
View 4 Replies View RelatedWhenever i go to download something, I always get a message asking if i should wait for a wifi connection before downloading...
Problem is, the phone is already connected to a wifi connection, so why is it asking me if i want to wait? Am i missing something? or is this normal?
I have a 1520(used to have a 1020) and my brother has a 1020. Of course i have to deal with her complaints when something goes wrong since i pushed her to a Lumia 1020 ....
What happens is, for whatever reason WIFI just randomly stops working. It'll show she is connected(both in the Icon at the top where you swipe and under settings/wifi) yet it doesn't actually load anything.
She'll be searching on Bing, Facebook, etc etc and she'll get the loading dots at the top of her screen that'll run endlessly. I have to then go into her settings and turn off wifi and then back on and it'll start working but then eventually it does it again shortly where there is no data or whatever.
I've experienced some slow switching between wifi on and wifi off.. Especially when I switch wifi to 'OFF' it would take several seconds up to half a minute if not more....
View 9 Replies View RelatedNo problems until recently. I've noticed at Home & Work where I spend 90% of my time the WiFi has not connected (and I end up using my Data Plan). So once I notice it I have to connect manually and its fine. Both networks show up in advanced at "known".
View 9 Replies View RelatedI have a Nokia 1020. It has worked very well for me until recently when I bought an Qed UPlay bluetooth receiver for my stereo.Previously I had bluetooth disabled always on my 1020 but now I have it on the most of the time.What I've noticed is that my phone is restarting constantly. It seems to be connected to when I have bluetooth and wifi enabled. Or at least when I have bluetooth enabled.The phone can restart a couple of times a hour. Since yesterday evening I have had 6 restarts. That I know about...
The bluetooth settings window also hangs, I can't do anything, can't connect/disconnect from the Qed and I can't disable bluetooth. When I try a progress bar is showing that it is working but it never changes to disabled.Also, when this is happening I also can't disable wifi, the same issue with progressbar.
The wifi status bar also sometimes is in the "connecting to a wifi"-animation. It can be in this mode in hours, and of course, doesn't connect to any wifi allthough I have two which are available.I usually have to restart my phone to be able to disable/enable bluetooth/wifi.I had this issue before GDR3 and Nokia Black. And still have it after updating to Nokia Black.
wifi is not connected lumia 1020 and not setting ip address. so so what i do as
View 1 Replies View RelatedThe internet connection on my 1020 is extremely slow when WIFI is connected (every other device I own is fine and can easily clear 30 meg download, 5 meg up.) When I use search, the phone screen times out and shuts off before returning any results (times out after 1 minute). I have reset the phone this morning to start over but the problem remains. The speed is perfect using Data and WIFI off, but once WIFI is enabled, the internet comes to a near halt.
View 24 Replies View RelatedI need to edit the default gateway setting for one of my wireless networks as there is a repeater that for some reason only allows me to connect to a handful of networks but if I'm nearer to it than the main wifi router the phone switches to it. I want to just manually set the default gateway as the main modem router like I have done on my laptop but don't seem to be able to edit the settings in Windows Phone 8 - they're all greyed out.
View 2 Replies View RelatedAfter weeks with the update I've noticed that my wifi reception seems to be pretty spotty. I know it's not my router because all my other devices have maintained the same performance as they always have. Most of the time I get half the signal I used to but sometimes I get no signal at all until I restart.
View 13 Replies View RelatedI'm having some weird issues with the WIFI connections when my phone is on airplane mode. I can't connect to both of my home WIFI - 2.4GHz and 5GHz. Both of the SSIDs are not being displayed at all, until I turned off airplane mode. However, both my Nexus 7 (2013) and HTC One are working fine with their airplane modes.Is this some crazy limitations of Windows Phone again?
View 24 Replies View RelatedHer phone was perfect before doing the updates. Now, she claims the BT just turns off and won't turn back on (in the car, connected to the car audio system). I looked at her phone the other day and sure enough, BT and WIFI were both OFF, and when I tried to turn them on, it said something like "Sorry, can't to that right now. Try again later.". Turned off phone and turned back on, and it's fine...for a while, then does the same thing.
View 18 Replies View RelatedMy new Lumia 1020 was connected to wifi when I began setting it up. I got a data usage warning message the next day, so I made sure it was still connected to wifi - then I got another warning message advising me more charges were being applied to the data plan. I called ATT and explained and was told that the 4GLTE runs all kinds of stuff in the background that uses data and to turn the data off. I did - since then, no more data usage - however - it will not stay connected to wifi after a time out unless it is plugged in. It still shows that its connected to wifi but its not.
View 2 Replies View RelatedNo problems until recently. I've noticed at Home & Work where I spend 90% of my time the WiFi has not connected (and I end up using my Data Plan). So once I notice it I have to connect manually and its fine. Both networks show up in advanced at "known". Is this a "bug" caused by a recent update?
View 5 Replies View RelatedI am using Nokia Lumia 1020. It has been having a trouble auto connecting Flight Mode. I can not use my mobile as a result of that. It connecting automatically WIFI connection as well. I can not off both Flight Mode and WIFI manually as they connecting automatically.
View 1 Replies View RelatedSensation is seeing my network but not my printer.
View 1 Replies View RelatedWhat printers will allow you to print directly from an I-Phone 4S without connecting to a wi-fi network?
Info:
iPhone 4S, iOS 5.1
How do I print directly from lumia 900. Can this be done?
View 4 Replies View RelatedAlso are they saved to the camera roll?
View 3 Replies View RelatedWill Kodak wifi printers work with AirPrint
Info:
iPhone 4S, iOS 5.1.1
I tried to connect my Brother and Samsung printers but it doesn't see them. I even upgraded the printer firmware, the latest supports windows 10. Do they have to be on wireless or should ethernet connected also work? I have a Brother HL2270 laser and Samsing clx-3180 multifunction laser.
View 2 Replies View Related