Lumia 1020 :: Compass Re-calibration On Every Restart Of Phone?
Jan 17, 2014
Encountered issue with the calibration of the compass when using Here maps after a phone restart? It seems like compass settings do not get saved? I need to recalibrate the compass with the figure 8 thingy in Here maps after every single restart of the phone?
I've had my Lumia 1020 since the 12th but I didn't get to open it and activate until the 18th since I was out of town. So far the only major problem that I have had is the phone randomly powering down. When it does this, 30% of the time it attempts to restart and it fails. (AT&T logo and then nothing) The rest of the time the phone does not respond to me pressing the power button alone, and I have to do both volume keys with the power button or plug in the charging cable at the same time to get any kind of activity.
I had this sort of issue with my 920 before, but not quite as frequently as I have had with the 1020. (Considering my time of ownership) Is this an OS-specific issue or does this seem like hardware? I would prefer to be better informed on this and know what the best course of action is before I go nuclear by contacting AT&T. I'm sure I would get a "new" Lumia 1020 but knowing my luck I would get a certified like-new device that has a cosmetic flaw or another issue not present in my current phone.
my new (3 weeks old or so) MAXX's compass until today. The compass worked flawlessly. I never had tried to calibrate it. Then, while driving home today with Google Maps, Maps suddenly noted that my compass wasn't calibrated and asked me to calibrate it. Now, the compass is off by 10-80 degrees as I turn around. I tried re-calibrating again with GPS Status and got the same result. The compass calibration routine on the MAXX is broken. I don't know if this is a Google Android issue or a MAXX issue. Is there any way to reset the compass calibration to default values?
I was quite pleased with my new (3 weeks old or so) MAXX's compass until today.The compass worked flawlessly.I never had tried to calibrate it. Then, while driving home today with Google Maps, Maps suddenly noted that my compass wasn't calibrated and asked me to calibrate it.Now, the compass is off by 10-80 degrees as I turn around.I tried re-calibrating again with GPS Status and got the same result. The compass calibration routine on the MAXX is broken.I don't know if this is a Google Android issue or a MAXX issue.Is there any way to reset the compass calibration to default values? The solution offered by fletc33, which I assume closed the discussion, does not relate to the problem the original post talks about nor does it offer a solution. The problem we have has to do with the compass on Google Maps. it is not a frozen compass, or calibration of the compass. it has to do with the compass being off in Google Maps and the degree of the deviation varies erratically. The problem in not that the compass is off by some degrees, or that it is frozen, the problem is that the the compass is going all over the map when in google maps.
I have researched this problem for a couple of month, reading posts (here and on other forums) about this and similar problems and I'm yet to find a solution to this specific issue.I am going to take a short video of my phone rrunning google map to better illustrate the problema, nd post it to this thread.
I just recieved a warranty replacement DX2 yesterday.So far, it is a neat phone and I am quite pleased.However, I am unable to fiind the selection to calibrate the compass. In my old Droid X it was in Menu>Settings>Location & Security>Calibrate Compass.Now, Calibrate Compass is no longer there.Perhaps the DX2 compass doesn't require calibration.
The volume on my 1020 has been getting stuck at whatever level I felt it on. For ex: when playing a song at level 10 then playing a YouTube video the volume will stay stuck at 10. Even after pressing the volume up and down does nothing. The only fix I found was restarting the phone but then it just happens again...
So I attempted to do a full wipe/hard reset on my Nokia 1020.. I thought it was working until it restarted and now goes to a WINDOWS BOOT MANAGER screen. Am I completely screwed now? I don't understand how I can't even force-reset the phone. This is really upsetting and I don't know what to do.
I recently bought a Nokia 1020 and i suspect that there are something wrong with the camera. The quality of the photos that i take are, in my opinion, nowhere near the ones you can se in reviews and those released by Nokia.
To me it looks like it's only the middle part of every photo that is correctly focused. The edges are very blurry. I have no case on the phone, no dirt on the lens and i have tried to reset the camera and reboot, no difference.
I will attach some photos on which I think you can see it clearly. The images are very sharp in the middle but when you move towards the edges it quickly becomes blurry. Both pictures are taken in daylight with Nokia Pro Cam, all settings on auto.
The pictures are the high resolution version: FileSnack | Easy file sharing FileSnack | Easy file sharing.
New to the Windows mobile phone... I use my Windows phone for business and do a lot of conference calls. With my iPhone I used to be able to put the phone number with three commas and then the passcode to the conference call in the meeting request (format = 555-555-5555,,,12121212#). By using this format my customers could just click the link in their iPhone and it would auto-dial the conference number along with the passcode so that they did not have to remember the passcode while driving.
Example: 555-555-5555,,,12121212#. (autohyperlink for iOS) VS 555-555-5555 Passcode 12121212 then press # (caller can hyperlink the phone number but has to remember the passcode and dial it while driving...)
By using this format you could just click the number and it would dial the number pause then auto add the passcode and # to enter the conference call. I think Blackberry used to use a similar format to achieve the same thing.
Yesterday, I went running with my Lumia 1020 listening to music and using the Runtastic app. The music stopped - I looked at the phone - it was turned off. I tried powering on, but to no avail. I should also mention that upon leaving, the battery was fully charged and this happened after some 20 minutes. When I came home, I immediately put the phone on the wall charger and expected it to power on after a while. I checked it after 3 hours and nothing, the phone was still stone-dead and what was even more worrying, completely cold - no heat-up from charging.
I tried connecting it to my PC - the computer didn't even recognize ANY device was connected to it. Just to be sure, I tried Nokia Software Recovery Tool, but sure enough, it was not able to detect the phone. The phone seems to be dead meat now, but when I put it on my desk wireless charging stand, the stand's indicator lights up, although the phone does nothing and stays that way.
Yesterday I updated my Lumia 1020 to Lumia Cyan. I've been using WP 8.1.1 with developer preview. Today I left my phone at home, I didn't use it and when I tried to pick it up I actually got scared, it was so extremely hot that I thought it will explode. After few seconds I got warning that battery is low but I know that it was around 70% when iI left it(I've left it only for 1 hour). I turned it off so it could cold before I charge it.
nokia lumia 1020 has just gone dead no response from the phone tried hard and soft reset nothing happens tried plugging in a charger into charger port on the phone and still nothing before it went off the phone had half battery life in it and was expreincing phone freezing up and the phone slowed down and now wont come on at all i have had the battery replaced and still no joy the phone shop tried to flash the software and no connectivity with computer also the phone shop checked my old battery with another lumia 1020 and that worked so the issue wasnt the battery
For some reason, my Lumia 1020 died on me today for no apparent reason. I had been listening to music on my way to work this morning, put the phone down on the table, and no more than an hour later the phone was off. I tried powering it up, but nothing happens, nothing appears on the screen, no startup vibration, etc. The phone had a full charge before work. I know if there is a batteryproblem, the phone will display a red battery picture, but this has not happened.
When I leave the phone sitting for a few minutes it drops from H+ to H meaning I can't access the internet on IE or receive Whatsapp messages. If I toggle flight mode on and off or restart the phone it works fine for maybe 10 minutes or so.
I have network selected manually, I have tried automatic selection, it makes no difference. I also have 3G set as the highest connection speed. I upgraded to WP8.1 last week but have had no issues until now.
About a month ago my Lumia 1020 randomly began turning off. I actually just purchased the phone used off eBay around the end of April. The phone itself was in great condition, but I wonder if I would up with a defective model. Since I bought the phone used, I suppose I'm out of luck when it comes to manufacturer's warranty?
I have a lumia 1020 that i received 2 years ago. i kept it nice and took good care of it. but 3 months ago i tried to update it to windows 10, but i didn't like it so much and got troubled with lots of bugs. so I "factory reset" my phone, so i could return to windows 8.1 again, i came across some kind of spinning gears when resetting. i thought everything would go on, but it seem like to stuck in 30 minutes. Later it shutdown, and begin the update process again.
I can't shut down the phone it the condition, only soft, hard. etc resets works, and when i use one of them. there appears a "low battery sign" that means i have to plug the the charger, afterward it goes back to the the spinning gears, and that is the bootloop. i tried many alternative solutions as the "key combination" or "programs on pc that reset the phone" my phone won't sync with the pc as it should do. it only charge. Now i simply don't know what to do.
My new 1020 doesn't seem to connect to my PC. My 920 connects just fine, I plug it in, I hear the USB connection sound and the app pops up. But my 1020 on the same cable, nothing. The Device Manager doesn't even pick up that anything is there, though the phone does show that it's being charged. I know it's not the cable, and b/c my 920 works it's probably not the PC. I'm worried b/c I installed 8.1 on both my phones and technically that voids the warranty. So if this is a bad device, I may be screwed.
I just got a lumia 1020 locked to Rogers network, I now tried 2 different unlocking sites and both have failed to give me an unlock code. I am pretty sure that I have given the correct imei code as I had another person verify the number I gave.
total smartphone newbie here, seriously considering the 1020 but had a quick question. If I want to use my wifi instead of cell data, is this the correct setting?
Defining Internet Connections:
On the Start screen, swipe left Tap "Settings" Go to "Wi-Fi" Make sure that "Wi-Fi networking" is enabled Select the connection that you wish to use
To use a mobile data connection:
On the Start screen, swipe left and go to "Settings" Tap "cellular" Switch "Data connection" to "On"
I have tried to connect my lumia 1020 to PC and it's not recgonize it's connect only as charger .. it was good but now i didn't know what happen .. i tried all things likes :
restart my phone restart my pc install windows phone app ( didn't recgonize phone as connected )
My Nokia Lumia 1020 will NOT connect to my surface pro 2. I have looked high and low on the internet for a solution. The problem in my opinion lies in the detection and installation of the drivers to the SP2. It plugs in and charges but the computer doesn't detect that there has been anything plugged in. Nothing shows up in file explorer or device manager. But my old Lumia 920 was recognized. Here are a few of the different solutions that I have tried and have fail to fix my problem.
Soft reset when plugged in to install the missing drivers (failed) Switching different cords to make sure I was using a data cable (failed) Tried plugging it into multiple different PC's and even a mac (failed)
The stupid phone will not show up anywhere! I am running Windows 10 mobile but I have had this problem in 8.1 for over a year since I bought the phone. This even happened with my first Lumia 1020 I owned when the phone first came out! (Which shattered)
I think the root of the problem lies in the hardware of the phone itself. My guess is the USB port is damaged so it doesn't fully read or something along those lines. It takes a good 5 hour for a charge which seems long to me but I'm not sure.
Battery life is worse than pathetic. Just a few calls a day, and what I consider average app use (music usually plugged in charging), and with the camera grip (with aux battery) and tonight it started flashing "Battery critically low". Fully charges it overnight, every night. With the camera grip you'd think it'd last longer but it's getting worse. No background apps and I've tweaked the settings to minimal power usage (per a site I found on which things to turn off, etc.). By late morning it's usually close to 60% battery and keeps going down.
To make matters worse, now, we can't shut down the phone. When we try, it says Goodbye, blanks out, and turns right back on and boots up again. Over and over. We can't turn it off.
I'm thinking a phone reset might be in order. If so, I'm hoping things would get restored from the backups? We have apps+settings, text messages, and photos set to "Backup On". Unsure what the difference is between a hard reset via button presses, and doing a RESET PHONE from the settings menu?
So the other day my lock button stopped locking my phone. However if I hold it down it will still let me turn it off (by dragging down), but then it turns on again. I can't unlock it by double tapping the screen either. When I plug it in to my computer it isn't recognized by the "windows phone app" for desktop, but it turns the screen on so I can use it for a bit. I can't turn it off and then plug it in because it always turns back on, and sometimes I can't regular turn it off, I have to hold the down volume button and the lock button to hard restart it.
My 1020 has started losing its GSM signal for no reason. Its done it twice now in 4 days. I havent had 8.1 DP on it, so its been on 8.0 Black the whole time.
When I go to make a phone call, I just get the familiar "beep Beep Beep" when it hasnt connected.. when I try to call my phone from a land line, it goes straight to voicemail, yet it still says "O2-UK" on the phone tile, still says 4G with all bars in the top left.
Yet as soon as I re-boot the phone.. its working as normal. I use my phone for my business so I cant have it doing this.
Ive removed and re-seated the Sim Card, could this be a faulty Sim or even worse a faulty phone