LG G3 :: ES File Explorer - Connection Fails On Exit
Jun 17, 2015
I have a link set up on my PC that uses the Remote Manager on ES File Explorer to access the files on the phone. This works very good, except that even though I have ES set to keep the connection open upon exit, the connection fails if I exit ES. The icon on the home screen actually shows connected, but it isn't until I launch ES again. I reinstalled the app but it won't do it.
Why is there no File no standardized file manager or explorer concept where you can manage your data on your Micro SD card. Select lots of files and move them into a folder. Rotate mulitple pictures and email mulitiple file easily? Why is this not standardized on all blackberrys
is there is blackberry file phone explorer out there so that you can check all files/folders on your phone from your computer? not jsut talking about seeing the stuff on your micro sd.. but the system files and such.. i thought there was one but might have been mistaken.
When i connect my N73 connected with usb the phone shows up with C: and the SD card partition.Connecting my new E72 makes only the sd card partition show up, i need to delete the thumbnail cache on the phone itself as it's corrupt (broken thumbnails, system error when deleting them..), how do i access the phone system partition from my computer?
Cannot find in the shop a media player (to listen/fast forward/rewind downloaded podcasts) or file explorer (to delete podcast files after listening) to emulate functionality provided in WfM6.5. Do they exist?
This is bizarre, everything was fine until this morning, not sure what's going on but the phone still comes up in Windows 8 file explorer, however as soon as I click the Internal Storage directory, file explorer stalls as the green progress bar slowly crawls along and eventually times out.
The phone says it's in MTP mode.
I looked at the driver supporting this phone for Windows 8 and it says it's from 2006. I found a link for installing thhe Google USB driver but there is no instructions for installing it in Windows 8, the phone not connecting to the computer in MTP mode which isn't an issue for me.
I have tried to update my BB9930 several times using the desktop app, and each time it appears to hang with 24 files left to download. Finally I dug around and discovered the Log Window, so now I see why it's failing to update. It cannot a file that it needs, so it eventually fails (after several silent attempts to download that one file) and unwinds back to where I started.
I have had many kind of problems connecting my N97 mini with my laptop but have finally hitted the edge in this issue and didn't find an answer existing here. When I updated my Ovi Suite to the latest version the connection to my N97 mini was cutted off. This was maybe two weeks ago and I haven't been able to connect the phone to the laptop with PC suite connection form ever since (and no further updates available). I can sure connect with the Ovi Music in other connection forms and store the music to my phone but any connections with the Ovi Suite fails. There for I cannot sync my photoes or address book or get the new updates by my computer. What could I do to get the connection back? Install an older version again? Where to get one?
Today I checked the program updates with my phone application and there is software version 12.0.110 available to upload. Well, my phone does offer for other updates to "start to update" but this one gives only option to "update via computer" (I don't know the exact terms for the option written in the quotes since I use my Nokia in Finnish). How could I get the updates to my phone via computer when I cannot connect with the Ovi Suite anymore?
PC: HP Compaq 8510w running Win XP Professional, SP3 with PC Suite 7.1.51.0 Bluetooth: Broadcom 2.1.207.297/HCI 2.0/LMP 2.0 (HP integrated) E52 software ver 052.003, custom 052.003.247.05 (updated a month earlier)
They pair, but the phone insists my PC is an Audio Device ("Connect to audio device" on the menu). The PC responds somewhat strange - "Bluetooth Hands-Free device E52 Establishing Connection"...which FAILS - "Unable to establish Bluetooth connection" on the E52. So my PC also believes the E52 is a hands-free device. Apparently.Discovery of services on the E52 yields Data Transfer, Dial-Up Networking, Headset Audio Gateway, OBEX File Transfer+Object Push I recently replaced my original E52 with a new one and the first phone paired well and I could at least be on-line with text messages, calendar and contacts, although sometimes they would not connect automatically or the connection would be broken.This one's a mess.
I have paired my torch to my new Buick enclave and everything was good for about a week. Starting last week I have not been able to connect to my vehicle. My phone shows the connection failed.
My HTC One X, which is only two weeks old, loses its data connection even when there is service coverage. It seems to happen after the phone has been on for a while. The only way I have found to re-establish the connection is to restart the phone. There is at least one other user on this forum with a similar problem.
I have got my Dell Vostro 3700 with Win7 (Pro-32bit) recently, have been trying connect my E72 with OVI via bluetooth, it only work when the first pairing, and the connection cannot establish once i restarted the computer.
I just bough the Torch 9860 and already replaced another one for the same problem, and since this second have the same problem, I think it is a general problem. Well the thing is that while the phone is in 3G coverage, it sometimes goes to like a "blocked" state. By this, I mean that the phone states as connected to the network and with full signal, but call wouldn't go out nor in, data is also not available, and the most important thing is that the phone doesn't show any signs of disconnection nor anything problem alike. Up until now, I have only seen this happening while in 3G coverage, and when this problem occurs, I switch the phone to 2G only and starts working fine again.
cannot connect to server error when attempt to connect to msn,BB instant messaging contacts shows avail , but grey out to send messages ..sending msgs give timmer , is hanging..
I'm trying without success to connect my brand new Xperia Mini/PRO to my existing Google account via a WIFI communication to my router. I first configured the WIFI connection on both the router and the phone (IP address, MAC address, WPA-PSK key).This being done, the phone actually automatically connects to my WIFI router when it is located within the router's emission range. I checked on the home page of the router that the phone is actually mentioned as a connected device. I assume there is no basic problem with my router as I use it everyday with both cable connected and WIFI laptops under Windows 7.
When I try to create - for the first time - a connection to my existing Google account, I enter my Google email address and password and lauch the connection. I then get a warning message that says "Connection... This may last a few minutes". The problem is that this message stays forever displayed and the connection with the Goggle account is not done ... until, after tens of minutes, I finally decide to cancel the connection trial. I tried as well without success to use the web browser - still via WIFI on my router. The browser isn't able to access any internet page. This seems to be a connection problem although the phone is correctly connected and recognized by the router.
My boyfriend has been trying to send me pictures from his n900 to my 8900 curve ,connection fails automatically, when tries to send me a file it asks on my bb if this code matches, and it never does.i can send to him,but he can't send to me.
Nokia Icon received last week from Verizon. I generally like the phone and am excited about using it since I am a Windows user and want to take advantage of using my phone with Windows PC. Heard great things about this phone and wanted to try it after years of Android use. I have heard complaints about lack of apps but I am not an apps user except for the most basic ones. My problem is more with connecting to other devices. After receiving phone, downloading updates to installed apps out of the box, I have had problems with connecting/staying connected to WiFi. Had to reboot phone to get any recognition of networks. Working better now. Bluetooth is the current problem.
Phone does not recognize radio. Just searches and searches. Talked to both Verizon and Alpine Stereo. Alpine says I need to update a file since the head unit is four years old. Took Icon to my wife's brand new Escalade and it will not recognize it either. Just searches away. So, four year old or brand new units don't seem to have been set up for Windows phones.
I have 5800 with version 40. When I go to establish a Bluetooth connection between the phone and my car stereo with BT, the phone finds the car audio receiver but fails to pair .
In the phone help section , it say I need to first assign a pin code to the phone and then enter the same number on the radio receiver and then start pairing .
I have looked all over and can not find any menu on my phone that let me input any pin number . I have tried numbers like 12345 and 1234 on the radio receiver but failed .
Does any one knows how to input the pin number . This apparently is not the Sim number .
This is a number we are supposed to come up with and input in both devices
My partner recently accidentally tried to update to ios 5.1 out of wifi and it has crashed her phone (stuck on apple logo). We have been trying for 3 days to restore her iphone 4S through itunes 10.6 (Windows). However, the download always times out and we lose DSL connection for a minute or so. I have also tried to d/l 5.0.1 and 5.0 from websites offering direct links to appldnld.apple.com and the same thing happens everytime. Usually at about 9%. I lose internet my ADLS2+ connection every single time I try to download any apple software through itunes or via direct links through multiple browsers.
how to read in raw image files direct from my dslr. I have an OTG cable that is connected to the micro-usb. If i set the camera to jpeg it will launch the gallery and allow me to import these so i know the cables work, the images can be imported and stored on the xoom. Have also read variuos things that say direct raw import are not possible but am not sure if this is now out of date. I also know rawdroid works ok once i can get the files on the xoom so have my raw viewer sorted. Now, if i try and use file manager and check at the /mnt directory i can't see a way to find the sd card in the camera to try and copy them over. This was one of the key things i wanted to get working on this when i bought it.
any suggestions what to do gratefully received have done the ususal, turn everything of and on, remove battery, all are charged ok but computer doesnt seem to recognise bb any more and cant connect
I JUST bought N900 and only problems i got with the Bluetooth ... i cant receive any media file from other devices or my pc laptop . it give FAIL TO CONNECT WITH REMOT DEVICE CAN RECEIVE AND SEND ONLY PICTURES .. NO videos No music files NOTHING ELSE I CAN RECEIVE AND SEND except pictures Please any1 face same problem to leave notice how we solve this ..
I have a Tytn ii that I managed to get Android running on. Android is run in RAM, so the Winmo full install is still there. A bunch of things in Android still don't work right, but that's not the question I have here: Is there any way to exit Android without pulling the battery of the phone? I've found lots of sites that say that it can be installed, lots that say how to install it, and lots that are working out functionality problems within Android (on non-native phones)--but none that address this question.
I am able to see all the messages and all the inbox, sent box, etc but I cannot exit messaging at all. I keep pressing the screen where the word "EXIT" is but nothing happens. Even when I receive calls, after the call is done, the phone keeps taking me back to the messaging screen..
How do you exit the AIM app on the Torch? I started it by mistake and now the normal Menu->Close just hides the app in the background. How do I EXIT for real.Why do they make it so difficult while trying to make it so "pretty" and simple?