Since this morning i experience the problem that when i switch my phone on i cannot use the touchscreen. No input is accepted. When i switch the phone off and remove the battery and then switch it on the problem dissapears...
Sitting here waiting for iP4 to be released in Sweden and thinking, is it worth buying an extra insurance for your phone? Since hearing several stories and people dropping their phones and getting cracks in the glass, which isn't really that surprising, I think that getting an extra insurance for iP4 is a good idea. But then of course...Usually they'll run you like $70/year and maybe around $200 in excess fee...
How much does it cost to switch out/repair the back glass of an iP4? If it's below $200 there's really no use in getting an extra insurance. It's the back glass that I'm worried about, nothing else really...
So when my phone is asleep and I get a message, once I turn my phone on to view that text, before I go into the message my phone alerts me a second time that I got a message. It also does this with my kik messages. And if I had gotten a bunch of messages while my phone was asleep, then when I turn it on I get spammed with second alerts. I've rebooted my phone, and my alert repeats are set to never. But I'm still having this problem. It's been this way since the day I got it and never really paid attention to it because I didn't know anything about iPhones since my previous phone was an android. I have the iPhone 5s, brand new, and I've never had any problems with it until now. Well, even now I still don't think this is a problem. It doesn't freeze or anything like that, I just can't seem to make it so it won't give me second notifications. I wasn't concerned about this until a little bit ago when I was telling my friend how annoying this can be and he said his phone does not do that. I don't know if it doesn't do that because he has the 5c and I have the 5s or what. Is this something I should be concerned about? Other than this little thing I have fallen in love with my phone. It never gives me problems and is amazing. I just want to make sure that this is not a problem. And if it is, how can I fix it?
URL...As far as I know, Facetime only work in WiFi interface, but Hong Kong telecom companies charge every single use during the activate the Facetime function and the data usage during the call. What a robber.
My iPhone stolen, there is a police report, called at&t and line suspended not one offer or even a suggestion to use a replacement, operator didn't give any info on how to replace or what steps are needed to get a new phone, paid for warranty and insurance on day I purchased iPhone 4s out on market for 3 dys. I feel they are avoiding my concerns and I've been transfer to every department that has not one person with knowledge or specific instructions for me to take care of the matter, does anyone know the proper procedure so I'm able to have a iPhone back?. Thank you for taking your time to answer as well, greatly appreciated.
I just got my iPhone 4s on a contract with the 3 network and the plan includes 5000 texts. I was wondering if it would cost extra to put a photo into an iMessage. If I was to put a photo in, it would be to another Iphone user also in the uk and on the same plan as me.
I am looking for a stable and extra safe platform for my IPhone and mac to store sensitive data (bank account no.s, passwords, receipts, certificates, ids, cc etc.). It will have to sync preferable over the air, have super strong encryption and allow a variety of files. I've really looked deep and hard for this, but I haven't come away with an impression that one is better than the other, or that enough users are vouching for it, hence I am posting to the forums for experience. Off the top of my head what seemed to stand out was meo, lockbox and 1 password, but none was all around convincing or had enough good references. If there are any users that have a contrarily approach to safety (the people who think a laptop with no WiFi that never connects to the network being the only solution). I would love them to chime in, because it's important that we try to establish a realistic but practical approach to our data that will safeguard them.
My iPhone 5s touch screen has a problem where it can be hyper sensitive.
In certain screens like iMessage, when I tap lightly in one area, the screen will continually to scroll upwards even when I am NOT doing the swiping up motion.Â
Sometimes worse is when I tap on a message to try to read it, it automatically swipe left on the message thread and delete the whole message thread and that is very frustrating and means I lose entire conversations. Â
OTher times, when I am typing out a message or email, the cursor for the next character jumps to the middle of the last typed sentence even if I did not do it.Â
Again, just to summarize, without my wanting it, my touch screen creed with one tap sometimes makes the phone scrolls upwards or leftwards on message threads automatically.
Have had my bb several months now but these past few weeks have noticed that a couple of keys have become way too sensitive - the 0 and the 2 keys which are adjacent to each other down the middle of the phone if that helps.
forever when texting these two keys will double key at the slightest touch - very annoying with the 0 as it puts a full stop in followed by a space. It also doesnt help that my passkey has both these numbers in and i have to be extra careful when keying this in!
The phone been fine for 6 months or so but I can't seem to stop this happening. Have removed battery and altered key rate but has no effect
Just bought a Nokia 5030. It's new and there isn't much information about it on the internet. I have seen a socket situated between the headset connector and the charger connector. It looks like a tiny small USB or something alike. I'd like to connect to it and see what comes out, and if I can input anything (music etc. I know there's only 8MB but still). Where can I get the cable? I'm curious about electronic in general, and would be happy to dig into the device.
I was just hoping that someone could please shed some light on a problem i have with my Blackberry Curve 8520. Just recently it has started to type extra "a" in when i use it then all of a sudden the "alt" button is putting in * when i press it.I read somewhere that it maybe water damage, but i don't take it near water then i heard it may just be the keypad sticking or thirdly it could be the software needing to be upgraded.if you have had the same problem and managed to sort it or even if you had to get a new phone.
I am facing problem with the brightness of X2-01. Its screen is so bright that after a short use it start hurting to my eyes . There is no option to adjust the brightness. Although I am using some dark themes because light coloured themes appears like a torch in darkness but this trick is of no use for internet browsing. Why Nokia not understand that eyes are so precious organ of human body.
I'm a fairly fresh Blackberry convert and I'm absolutely loving my Blackberry Bold 9000 and having an amazing keyboard that worked extremely well, for a bit.
Lately though, the keyboard is WAY too sensitive all of a sudden, many times while I send a message I have to constantly correct errors where I thumb a key and it responds by typing that letter twice. The same exact thing is happening with my menu key, I press the menu key and I quite literally am "moving" an icon around my menu screen as it registers that I hit the key twice.
I've had this Blackberry for TWO weeks and though I'm loving it this is a serious problem and starting to get on my nerves. I contemplated thinking if it was just my typing but this happens so subtlety I ruled that out fairly fast. I really have no clue what's going on and tried playing around with the "key rate" settings to no avail. Unfortunately a return isn't really an option as I bought this mobile new online and am starting a contract with my company soon.
I got my HTC one m8 two months ago and I've been using it very frequently. When I use it I see the volume bar increasing to max randomly. It's extremely annoying since I wear headphones. I tried some things out and found out that when ever I touch the volume up button slightly it raises the volume. You can feel the click of a button on any volume button that indicates that you are pressing it. I don't even push it to feel that. It's a light touch and it goes way up. My lower volume button is fine and it doesn't increase until I push past that click. What's going on? I've heard of loose volume buttons mine are firm and don't rattle.
I've found the double tap to wake up to be very sensitive when the phone is put in my pocket, the screen unlocks on its own and sometimes the flashlight gets toggled. I'm on the latest firmware. Are there others who face this issue as well?
Whenever there is a button that is part of a scrolling list, when i tap the button the list scrolls slightly instead of activating the button. I find that i need to press lots of times to be able to activate the button.
I understand in previous galaxy phones you could adjust screen sensitivity and i did search for "touch", "sensitivity", but I can't find a similar option with the new phone. Is there a way to lower sensitivity that i am not aware of?
I purchased a blackberry curve 8530 on thursday, and have used it for one full day now. The mute button is EXTREMELY sensitive, but only from non-direct touch angles - so basically it goes into mute mode when I do not expect it. This is becoming a massive annoyance.
Is this a normal problem with these phones, or should I try to get a replacement? Will they make me go to RIM to have them send me a refurbished phone for my 1 day old brand new phone?
I've had a big problem using my 9900 in bright daylight outdoors, I'm not 100% sure if it's due to heat, or the bright light, but the menus keep going up by themselves to the point where it's very hard to use the phone. I can control the menus by using the touch screen, but it's very difficult with the trackpad because they just keep going up.
The camera for my HTC One M8 has seemed to have become very sensitive to light. I can't take any photos without light making the picture very glary. Just wondering if my sensor is damaged? I have played with all the camera settings and nothing changes the light glare, even ISO.
I've pressed quite many times a button accidentally just because my finger touched the screen for a very short time at wrong place. The display is so sensitive that it registers even the smallest touches.There should be an option to change the sensitiveness. For example the click event could be generated after the button is pressed 100 ms. This should prevent unwanted clicks.