I have window xp and have installed HTC Sync.I have connected the Wildfire to the PC using the correct cable supplied.I have gone to Settings/ Application /Development and enabled usb debugging.When I start HTC Sync I get the error message "no device connected"Is there someone who works for this HTC company able to explain this dysfunctional phone
View 4 Repliesdownloaded latest HTC Sync 3.0.5481 and installed OK.Connected new Wildfire to PC with USB cable, it asks me the type of connection, select HTCSync.Open HTCSync on PC and it states "No Device Connected"Is it because I'm running Windows 7 Ultimate?
View 4 Replies View RelatedI have been trying to connect my s6 edge to win7 without luck. I have tried the following (solo and mixing some changes) :
upgrade to latest Kies3
install Smart Switch
install Samsung USB driver
change the PC USB port
enable and disable the developers option
enable and disable the USB debugging
all resulted in the PC to be charging the s6 edge battery.
I am a user of the Blackberry Desk Top Manager, running under Windows XP 64 bit. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the program, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronization Program for over a year successfully before this took place.
View 1 Replies View RelatedI have a Blackberry bold 9650
V5.0.0.975
Running DM 6.0.0.43
Everytime the device backs up it goes all they through and at the end it gives the error message: "There was an error backing up. There could have been a problem with the device or connection during the backup. Verify that the device is turned on and connected."
When up connect my Atrix to my computer via the USB cable, I get the message, "Do you want to scan and fix MB860?" as wells as "Do you want to scan and fix SD card?" This happens on a Windows Vista and on a Windows 7 computer. The problem is not that I do not disconnect properly from the computer, as I always click that "Safely Remove Hardware" icon in the tray (isn't that what they call it?) down on the right of the Taskbar, and then click the proper choice before unplugging the cable. If I tell it I do want to scan and fix, there is never any problem found after the scanning.
View 5 Replies View RelatedAbout a 2 months ago when I would connect my blackberry storm (the first Storm) to my computer via the USB cord that came with the phone, I was able to transfer music from my computer (itunes) to the blackberry through Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to computer via USB, and Media Sync screen would change so that I could sync music to the blackberry storm). I didn't even have trouble installing Blackberry Media Sync back in December 2009
But now after I connect my Blackberry Storm to my computer, the Blackberry Media Sync screen does not change and continues to display "Please connect a Blackberry Device". I have tried these tips that I found online:
1.) restarting my computer (windows vista) several times
2.) updating/reinstalling Blackberry Media Sync and then restarting my computer
3.) reconnecting blackberry to computer, then opening Media Sync
4.) opening Media Sync first and then connecting blackberry to computer.
5.) installing BlackBerry USB and Modem Drivers (even though I can't find the USB driver for it under Universal Serial Bus Controller when I check in the Device Manager when you go to Control Panel - System and Maintenance - Device Manager, but I did find RIM Virtual Series Port v2 COM4 & COM5 when you check "devices by connection" under View in Device Manager) Or are RIM Virtual Series Port v2 COM4 & COM5 the drivers I'm looking for ?
6.) Going to Options (on blackberry) - Memory and making sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are set to "On", Encryption Mode is set to "None", and Auto Enable Mass Storage Mode When Connected it set to "Prompt" though I have tried "Yes" as well. It says I have 785MB of free Device Memory space out of 879MB of total Device Memory and 7.1GB of free Media Card space out of a total of 7.3GB of Media Card space.
None of the above tips and troubleshooting advice has worked. I have also checked the Blackberry Technical Solution Center but I haven't found anything from there that has helped either. I have found online forums/discussions including issues of people having "blackberry media sync cannot connect to the device" pop-up, but I haven't had this pop-up. The Media Sync screen just stays the same as if I never connected the blackberry storm to my computer in the first place even though my blackberry storm is charging via the computer.
Is there something I'm missing or haven't done yet? What should I do?
Yesterday I installed windows 8 Professional X64, but now I'm not able to connect my Htc Wildfire S to my PC. HTC Sync ( v3.2.20 ) says "No device connected" I guess thats because I'm missing the Android Phone drivers. In device manager there is two devices without driver: Android Phone and RNDIS ( USB Tethering ) Device manager is not finding any driver for my phone when I press update driver. I have also installed latest version of Googles SDK manager and installed EXTRAS // Google usb driver package which didn't solve this problem either... Referring to googles help docs ( OEM USB Drivers | Android Developers ) I should download OEM driver from HTC site but there ain't any..
View 1 Replies View RelatedI am a newbie to a smartphone and am trying to connect to my old Samsung E2550 (which I will continue to use) to my Widlfire in order to transfer my contacts. I have managed to pair them but on the Wildfire it states paired but not connected.
View 2 Replies View RelatedAm I the only one that gets these errors everytime I connect? I just click "try again" on the first message, then I click past the second message and then it works, but it seems odd. I don't have anything special on my network, it's just a basic cable modem with a wireless router and my computer connects via wireless. See attached for errors
View 2 Replies View RelatedHave a new 920 with airline boarding pass sent via SMS. When i click on the link, phone gives a message "this link can only be opened from a mobile device".
View 3 Replies View RelatedHow to get instagram working on the HTC One V.....I keep getting an error message "incompatible device"?
View 1 Replies View Related, its finding my phone but its saying it cannot connect this device... How do i sync..
View 1 Replies View RelatedI did an update today with my Blackberry Torch and when syncing with my Computer continue to get the following message:CRTranRec::GetLinkedRecordld :Invalid linked record ld
View 1 Replies View RelatedI have version 6 on bb desktop but keep getting an error message when trying to sync - reconfigure organizer settings to synchronise organizer data but I cant get to the configure stage without the same message coming up
View 1 Replies View RelatedI installed Nokia Chat from Ovi store on my phone. When I start the chat, I am shown an option "Get the latest IM service"
When I click this option, I see "Checking for new IM updates" .It keeps checking for updates for a min or so then I get a message 'Error: Unable to complete request. Try Again"
I have a proper wifi and so its not a connectivity issue. Previously I have used Nokia chat and I had all services(gtalk,yahoo etc) but recently I had to format the phone, so had to install chat again.
Can anyone help me with this issue ? How can I get this chat to work ? if there a newer version available which I can install directly rather than looking for services.
I just got my Storm 2 this afternoon (I had a Storm 1 for 1-1/2 years). After I restored my files from Desktop Manager I went to Application Loader to see what I wanted to take off or put on. I removed all the foreign language stuff and added a few items. When I clicked next I got an error message saying there was not enough memory in my device. This is crazy since I have 117 MB of free application memory. I am using Desktop Manager v. 4.7 that worked fine for my Storm 1. Do I have to use v5 for the Storm 2, or is it some other problem.
View 9 Replies View RelatedI just got a Curve 8520 today, everything seemed to be going alright until I tried to sign into Gmail, it didn't work. (This has happened before on another non-BB phone -- So I didn't think much of it) Then I tried to log in to the Yahoo Instant Messenger on the IM folder.Each one (MSN, YIM, AIM) gave me the error message of 'Service not Enabled for this Handheld device" I looked on Google, YES I do have a data plan, I went to my service provider about a different problem, (Close enough, it was about emails), and I DO have the Data plan.
View 1 Replies View RelatedI receive the error message 13010 when I try to sync my iphone-it says it cant backup the library!! I have Windows 7
Info:
Windows XP
I'm getting the "iphone could be synced because the sync session failed to start" I have read the previous posts on this subject, which have been focussed on beta versions. This is a new problem I'm having.I've updated to the latest iTunes offered to my MBP running 10.6.8. My itunes is 10.6.1 (7) and my iphone is 5.1 ith no updates avail. I thought it may be due to not having enough free space on the iphone so I'm deleting many photos and voicemails, memos, etc, but deleting them is not working. I wanted to sync/back them up and then delete.
Info:
iPhone 4, iOS 5.1
I updated ios and now get an error message when trying to sync iPhone to Outlook.
Info:
iPhone 3G, iOS 5.1.1, Get error message when syncing
Blackberry Torch 9860. When I try to sync using the desktop software the syncing starts as usual but then I get the error message 0x8386003e and I find that the tasks and contacts have not synced at all. I use Outlook. It says refer to documentation but there's no note of this error message anwhere.
View 1 Replies View RelatedI cannot sync my iPhone 4s to iCloud. I keep getting error message "-50" from iTunes. I do have enough space on the cloud because I purchased a $20 1year space. My is also has an error: Not enough space to sync.
Info:
iPhone 4S, iOS 7.1.2
The message is 'this is a wi fi only service'.I have set up as 'wifi preferred' and that is fine in the office or at home, but outside wifi areas the berry will not connect to the internet and gives that error message.
View 7 Replies View RelatedI have the desktop software installed ok, but do not see an option to configure with Windows live in the Syncronization configuration.
View 4 Replies View RelatedI have BB Desktop Manager 5.0.1 and I am un able to syncronize my Contacts with Windows Live Mail from Windows 7. The only options the Desktop Manager offers are: Outlook Express, Importad./Exportad. ASCII adn Yahoo.
View 15 Replies View Relatedi have a .lml file from my previous n81. i could open it using the pc suite before after trying serveral ways.but now it prompt me an error "the opening <logml > tag is not found" i need to open up the file urgently.
View 2 Replies View RelatedI am getting an error message 0x800400fb3 when I try to sync my calendar. It also states to check documents. I can not seem to respove the error.
View 2 Replies View RelatedWhen trying to sync my curve 9300 with outlook contacts & calander through my laptop a box comes up with 'unknown error reported' and stops the sync process.
I've tried rebooting etc but still get the error message
I am getting error message 0x8004fceb on my Torch when my Outlook calendar syncs.
View 1 Replies View RelatedMy S6 on AT&T is having sync issues. At girt it was just my Google contacts, every so often they wouldn't sync and when I went to setting it would give a sync error message for my Google contacts. Then I noticed my Outlook app wasn't syncing, only after I opened the app. Now the same is happening with my Yahoo email app.
View 6 Replies View Related