Just got a replacement device from moto, and I wanted to flash build E for 5.1, I am currently running build E, but when I was flashing the newer build I forgot to have the phone update to 5.0.1, so I jumped from 5.0 straight to 5.1. Should I have updated to 5.0.1 then to 5.1?
View 2 Repliesi remember having a order reciept of my nexus 5, when i ordered it last chrismas,and now i broken the screen and my insuranc need the order reciept that was sent to me via a email i made extra for buiing the nexus.how can i find out with what email i bought nexus, because i have a diffrent google account..
View 1 Replies View RelatedSo I'm running PAC ROM; I have a slight issue, I want stock GApps on my phone to add some features I've been wanting. When I flash it (tk_gapps-stock-5.1.1-20150809-signed.zip) on the official Nexus 5 lolipop ROM I got an error message, I read it and it says that I need to flash is ontop of another TK GApps, unless I wipe my cashe partition. So I wiped my Davlick Cashe and Cashe. Still have me the same message.
View 1 Replies View RelatedSo I am lagging behind a little in the updates department. I am currently on kitkat 4.4.4 (towelrooted, TWRP recovery with system files modified). AFAIK, i can't use the OTA update I received months ago for 5.0. Is there anyway I can upgrade (without wiping any data), to 6.0? If not, what would be the best way to upgrade to 5.0 (not a clean install/wipe)?
View 5 Replies View RelatedI pulled my phone out a bit ago and my LED Notification LED was flashing blue at me. I checked the notification area and there was nothing there. I checked my settings in Light Flow Lite and checked the three areas it was controlling that had a bluish light set. Nothing there (I even changed the colors of those notifications - no change). I looked around the phone as much as I could figure out and could find nothing. I finally had to reboot the phone to get the light to go off.
View 24 Replies View RelatedAfter I flash a ROM my contacts are taking along time to show up on my accounts or they don't show up at all?
View 1 Replies View RelatedI was using the Cataclysm Rom for months without any problems. Today I restarted my phone (I do this every other day, when it gets a little bit slow) and it stuck in bootloop.
I tried wiping dalvik/cache, doing a factory reset, reflashing Cataclysm, nothing worked. So I decided to go back to stock (using [URL] ....) and I'm still stuck in a bootloop every time. I can access and use fastboot/stock recovery in the normal way, but it won't boot.. What I could do?
Nexus 5 LED light flash red while being charged and the screen is off?
Just wondering because mine is doing it and I don't remember if it's new or something it has always done.
Any good "how to guide" to flashing the factory version of Android onto a Nexus 6?
View 1 Replies View RelatedIs it possible to enable flashing LED notifications on my Nexus 6 running CM 12?
View 6 Replies View RelatedI tried to root my phone, but I cant get past flashing the superSU.
I am running the latest version of android and I tried both TWRP and CWM.. I get to flash the custom recovery and boot up, but as soon as I try to flash SuperSU the phone gets stuck into bootloop. (also when I use CWM phone automaticly overwrites the custom recovery to stock, I know how to fix this but I must get the root access first though...)
Currently I reflashed factory Images and I am using my phone completely naked only with vital apps. But I am not willing to back down, I would like to find the fix and Root it till the end.
Flashing a ROM and got stuck on the checking connection page in set up if so how did you fix it?
View 3 Replies View RelatedOne fine day, my nexus 5 started hanging up while booting. After the google Logo, the Marshmallow animation would show up and then it would hang and power off. I have no problem in doing a factory reset/wipe of my phone. But the only thing i want to save is my contacts. I have tried erasing and re-flashing system, cache, boot and boot-loader. Using ADB, flashing the cache always fails........
However, i have not touched userdata as i think it would affect the contacts too. I have even tried using different custom recoveries such as CWM, TWRP and even Philz Touch to use adb to pull my SD card files to my PC. Even flashing the system is not working now.... (atleast that's what my results were) .
Philz touch error messages....
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't mount /cache/recovery/last_install
E: Can't open /cache/recovery/last_install
Is it possible to make a backup of bootloader? If it is, how? I am not talking about kernel (boot.img is the kernel, correct?), system, recovery, or data. Bootloader.My Nexus 5 came with bootloader version hhz11n. The factory image from Google (4.4.4) has bootloader version hhz11k.
How different these two are, but since hhz11n image can't be found anywhere, I want to back it up before flashing to Lollipop or Marshmallow.
My Nexus is still running 4.4.4, bootloader unlocked, rooted, with TWRP installed.
I had the problem of random restarts after lollipop update (exactly afte rsometime i changed to pattern security )and i gave to service center and they told its OS issues and downgraded to 4.4.4. After that i installed all my apps in 4.4.4 (standard apps like banking, skype etc..) and used it for a while. when i tried to use screen lock as "Pin" this rebooting issue starting again? I managed to change it to "Swipe" and did wipe cache partition, and till now (for last 45mins atleast) its running okay.
View 2 Replies View RelatedI have flashed various version 5 stock firmware's and the latest 6.0 using nexus tool kit, as well as specifically flashing only stock recovery using the tool kit and I cannot load into the stock recovery. I've spent hours looking for information on manually flashing the stock recovery without the tool kit but have found the instructions very vauge. Any information on flashing manually only the recovery would be very useful or information on why I may be having this issue.
I know every time i flash a rom it only shows about half of my internal storage. I have a 32gb version. So I end up having to go into a recovery "temp flashed" using the tool kit in order to clear some information and then i get my 32gb's back.
I"m wondering if the space being auto allocated or partitioned is interfering with the flash of the recovery..
I recently flashed android 6 then i flashed twrp n then when i flashed supersu my phone is stuck on boot... How can I root my phone when it is getting stuck?
View 1 Replies View Relatedarchive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 1043723460 bytes
error: update package missing system.img
I always get this error whenever I try to flash the Nexus 5 with using the flash-all file, I installed Android Studio, restarted my PC, even got the 6.0 factory image. None work and I always get that error? I'm trying to restart this Nexus 5 for my dad. The Nexus 5 is rooted with franco kernel and TWRP but on stock ROM.
How can I prevent Auto-Reboot of my Nexus 5 after flashing an Official Factory Image? I've tried to add
Code:
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
after
Code:
fastboot -w update image-hammerhead-xxxxxx.zip
onflash-all.batbut the Nexus reboot anyway.
There is another command or option that work, or any other way for that?
Well I'm back at it again. Always had a problem of phone shutting off and entering qhdbootloader 9008 (however it goes) and I just run the boarddiag tool but this time its not that far. Well whenever it does that I also have to reflash system but now when I try to flash a rom, it gets to the installing system part in twrp and hangs, then reboots at the google logo until I enter recovery again. Aka I cant flash a rom, hangs and reboots at the installing system portion
View 5 Replies View RelatedI had on my nexus 5 custom recovery, custom kernel (franco) and paranoid android rom (rooted). I wanted to get back to stock and flashed factory image lollipop 5.1 doint this
adb devices
adb reboot bootloader
fastboot flash bootloader <bootloader-filename>.img
fastboot flash radio <radio-fileame>.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot reboot
When i rebooted i noticed that everything was fine but i had paranoid android rather than stock rom! What happened?
I've got a problem with my Nexus 6. The entire screen is blacked but I've good a flashing green band on the top of my screen when i try to start it. I can hear the notifications going thru my phone but the screen is blacked out. I've tried several times the Power button + Volume down but I can't even access the reboot display.
View 2 Replies View RelatedFrom last week my phone got stucked at boot(Google logo). I went to recovery mode-twrp and clicked factory reset..it failed saying that unable to mount storage.
And I also tried nexus tool kit, To flash lollipop stock rom, It say flash write failure..
And tried fastboot flash all.bat method also but not works...
I'm having issues with DPI change, I used ADB to change the DPI using a simple adb shell wm density 460 && adb reboot, all good, only issue is a few things are.. weird.. For instance the "top apps" icon, little blue thinggy in the playstore is awkwardly big, it's larger then the font, but I didn't use the phone stock so I don't know if that's just how marshmallow is or if that's a dpi problem. I also noticed when loading The Sims FreePlay, the EA boot logo it extremely over scanned, the letters EA barely fit on the screen, the eBay app, the user display picture is cut off and only shows the bottom right corner on an icon that's huge and again over sized, as well as snapchat sending all of my snaps with extremely small font, yet on my screen before sending they look just fine.
So after looking into this further, the build.prop was never changed, it still says dpi 560, but I know for system files I need to mount /system in order to write to it without root. So I booted to recovery as that allows me write access to system, mounted system, says mounted /system at the bottom of the log, open adb, run adb devices, nothing comes up, it's not found, reboot phone, run adb devices, works fine. What's the deal? I can't get the 6p to work from recovery when mounting /system, it says it's mounted but on the computer end nothing is happening.
I also want to keep this phone as stock as possible, kind of a purist douche bag like that so I don't want to run TWRP, or at least I'm not committed to this DPI change being this important that I want a custom recovery.why I can't mount /system in the stock recovery? or rather, why I can mount it but why it's not working?
So, got excited about the MotoACTV this past Saturday and bought online through Motorola. Realized soon after that my local REI had it in stock and I had a xmas gift certificate. Went to REI and purchased it - (Canceled my order for the Garmin 910XT in the process) Went back to the site to try and cancel my order but the 'Cancel items or order' button on my order page wasnt' functional. No biggie, I'll call. After being passed around to the same 3 depts TWICE, I was finally told the ecommerce section was closed for the weekend. Once again, I understand that.I then call on Monday, they tell me the order hasn't yet shipped but I'm not allowed to cancel it at that point. Don't quite understand and getting a bit frustrated at this point but whatever, I'll deal. Customer rep tells me that they'll issue a return slip and email it to me.
OK, I'm good with that.Wednesday comes and still no email with return slip. I call, go through the same 3 depts again and get someone else who tells me that it takes a while to get the return slip but I'll have it within 24 hours.24 hours goes by, I call again and get hung up on 3 times in the process before I can ever get to anyone. Once I get someone on the line, they tell me that it should be to me within the next couple of days... A RETURN SLIP?Once I finally lost my temper a bit, they said it would be 'escalated' and that I should be receiving it within a few hours... we'll see. They also let me know that I could not return it without the receipt.Meanwhile, I've completely soured on the one that I purchased and I'm considering returning it as well and changing my order back to the Garmin. By the way, I called Garmin's support team just to compare... night and day!
I am loving my 6P, but I almost drop it all the time trying to reach across the screen and hit the back button while holding the phone one handed.
I think this wouldn't be nearly as much of a problem if I could move the back button to the far right position (this is where I had it on my G3 and it was soo much more comfortable to use).
Are there any root/non-root/modifications I can use to rearrange the buttons?
I have the bootloader unlocked and would happily root if it would enable the ability to move the buttons
I know Xposed add-ons will add this functionality eventually, but that could be at least a few weeks/months away.
I am trying to get a definitive answer as have been researching this for weeks and despite my best efforts still have no solution.I am using the fantastic N900 (well done Nokia!) and would like all my music on the device. All efforts so far have transferred music ok but album tracks always appears in alphabetical order in the music player as opposed to the album track order(not much good). This is despite careful tagging and trying with Windows Media Player, Media Monkey & Songbird to see if any work best.
I found out today that this might be due to the file being a .wma file. All my music is ripped to my PC in .wma as in my experience I find the quality vs file size is great and better by far than .mp3.Today I ripped a CD with WMP as .mp3 and after sync the track order was correct (although I do not want to use WMP through choice and certainly not .mp3, let alone re rip my entire CD Collection), my preference would be Media Monkey or Songbird with .wma.
Is this a bug or N900 problem? (I know they are different but it worked fine on N97 and N95 8gb previously with MM and .wma) Can anyone help? or even offer a recommendation or suggestion as to what they think is best format, application or way to have music on the N900 etc.
I love car mode on my S5, except for this stupid bug where it plays music in alphabetical order instead of track order when you ask it to play an album. If I say the same command using the "OK Google" feature outside of car mode, that works just fine. The metadata on the mp3 files have the correct track info.
View 1 Replies View Relatedordered an iphone 4s yesterday, but i've still got no confirmation mail. is it because it's weekend? i admit i'm starting to get a bit nervous, because when checking my order list there are no orders on my user neither. though, i signed up when completing the order of the phone. did it take a while before you got the confirmation mail or did I really mess this up?
Info:
iPhone 4S
I've been on the Pure Nexus rom for a while now and I wanted to try out the Screw'd Rom. So I downloaded and installed said rom. When It boots up and goes to the setup wizard I get no network data what so ever. I looked through the thread and it said to also flash the update vendor.zip. I did that hoping it would bring back my data but it didn't. So I decided to go back to the Pure Nexus rom, clean install, and again I have no network data. What I could do to get it back? I've tried messing with the APN settings but no dice. I should have made a back up before switching roms but unfortunately I forgot to do so.
View 2 Replies View RelatedAfter flashing viper4android, the speakers are unable to produce sound of any sort. I tried flashing the factory image, and uninstalling the viper driver, but nothing seems to work.
View 3 Replies View Related