Cseries :: C2-00 (RM-704) Low Volume With Bluetooth Handsfree?
Dec 7, 2011
I recently purchased the C2-00 (RM-704). I have thoroughly tested the phone and am happy with its features except for an issue with low volume while using bluetooth with a hands free car kit. I know it is a basic phone but the ability to use a bluetooth hands free car kit was one of my mandatory requirements The issue seems to only be the output volume through the cars' speakers. I do not have this issue with any other phone, including Nokia C2-01 and Nokia E71, and other non-Nokia devices. When making calls the other party seems to hear me fine, indicating that the microphone volume is OK, but it is very hard for me to hear the other party even at maximum volume. Due to the road noise I have even had to pull over and stop the car so that I can have a conversation, which totally defeats the purpose of having a bluetooth hands free car kit.
I've just updated my C1-02 to software V06.15. Alas, the max volume for handsfree calls via Bluetooth is still far too low. It's unusable in a moving car. This problem already existed half a year ago in the previous two software versions. Also, the address book isn't transferred correctly. I use a TomTom Via 125 nav for handsfree calls, but Parrot users have reported the same problems with the C1-02.
Ever since a new software download about 3 months ago I cannot connect my Jabra handsfree to my sensation. I can make the Jabra search for it but I have lost the option in my Sensation settings to "discover" a new handsfree device. It just sits there and times out. I go into my settings and get bluetooth on and it connects to the in car handsfree in my partners car but it can't find the jabra in my car.
I have an E71 and was using an old earphone for handsfree in car. Although the headphone is not high quality, it worked perfectly and I was well pleased. I attempted to use it recently but was surprised to find that my phone couldn't "see" the earpiece anymore. I have done the obvious things in bluetooth settings and even tried pairing another earpiece but still no joy.
I have upgraded by Torch (AT&T) to release 188.8.131.522. Since the upgrade I have been unable to reconnect my Bluetooth handsfree kit (Plantronics Explorer 240 headset). When I reboot the phone I can connect the bluetooth device but when I turn the bluetooth device off, the Torch will not reconnect to the device when I trun it back on unless I reboot the Torch. Also when the bluetooth device has been turned off the Torch still shows it as being connected flashing blue LED and on connection screen. When I try turn bluetooth off or disable it in the Blackberry it does not change state without a reboot (but always shows as OFF and will not return to ON or Enabled). I have tried both soft reboots (alt-shift-delete) and battery pulls. When bluetooth is locked up voice dialing app no longer works as well.
I'd like to connect my iphone 4s to my macs bluetooth. So when I get a call I should be able to use my macs mic and speakers for phone conversation I have seen bluephone elite but its outa date. Can this not be possible Apple products should be able to speak to each other.
I have just got an Incredible S and think its great. However I am having bluetooth connection issues with my handsfree kit. It keeps disconnecting and reconnecting. The connection only seems to last 2 to 3 minutes. I have tried it with two different kits one a Motorola T505 and the second a BlueAnt S4. Both had the same problem. I then tried a car with a factory fitted bluetooth system and it did the same.
I recently purchased a Q2 blue ant bluetoooth to be used with my XPRT. When I attempt to call a contact using the bluetooth device, I get an audio message that states "activating your phone in built voice command on the connected phone." "This feature is not supported on your connected phone" then my phone will display "complete action using voice commands" So in essence I have to tap the voice dialer app to make a call. So, is there another bluetooth device that is truly handsfree voice dialing that can be used with this phone?
I just updated and configured my brand new Bold 9900 OS 7.0 Bundle 2406 for my Bluetooth devices and two of them that previously worked have issues. They pair perfectly but both devices are unable to connect a ringing call, disconnect a call in progress or initiate a phone call. If I answer or place a call from the phone, the Bluetooth device engages but the voice is only one direction. I have tried turning Encryption on & off under the device properties and no difference. I have verified the one Motorola device is listed as Compatible with my bold so what's up here?
The bluetooth handsfree connects and pairs with my samsung s6 however it won't import the contacts, it keeps saying no contacts found but they are all on the device. The car dealer says it's an issue with the samsung security so I went to where I got the phone from and they can't see an issue and say it's an issue with the handsfree!
I have been unable to get my AT&T S5 to iniate a handsfree call from a bluetooth device if the S5 screen is locked. This is really unsafe in the car if I must pick up the phone, enter PIN or password before I can make a call. Kind of goes against the meaning of "hands free". I expected to find a screen lock bypass for "trusted" devices or something similar, but so far I have not. My bluetooth receives calls fine when locked, I just can't initiate a call.
I received a new bluetooth for Christmas to go with my Defy with Motoblur (a canadian phone) and the Voice Dialler sucks plus the bluetooth instructions are just as bad.It say to refer to your phone's usual manual.So, I would like to know how I can make a call from my bluetooth handsfree using the phone.Based on an older phone I could add a voice tag to each contact and then use that on the bluetooth.This phone doesn't seem to have that option.(It all seems to work fine if I am dialling directly from the phone once the ringing starts.But this is all pointeless as far as I am concerned. How can you be handsfree when your hands are required?)
The phone is running on the Android version 1.5 since Motorola didn't come out with an update on my phone and getting a new one isn't an option.Maybe there is an app in the market place that might work. (I can't even use Google Play because the phone version was not updated)
I have had my Droid for over 2 years and it has worked very well with my Acura HandsFree Link. Suddenly, it told me it was paired and could not connect. My husband's I-Phone (AT&T was worked with this car as long as my Droid has. But the HandsFree has no trouble connecting to his IPhone. My Droid also cannot find my husband's Plantronics hands-free earphone. The OS appears to be the latest version as I checked and no updates are available.
handsfree bluetooth completely not working after the Gingerbread update? I have an 08 Titan with the built in bluetooth and everything worked perfectly on Froyo. Since the OTA update, I can pair and connect but can't actually hand the call off to bluetooth. I try selecting bluetooth on the in call screen and it seems like it tries but I get no audio at all and it just kicks back to normal phone call mode. Speaker works.
I am using Nokia 5800 express music. I am facing problem while using bluetooth handsfree device. It is properly getting connected and getting paired with the device but while making the call the other end cannot hear my voice but I can hear them clearly. Initially I thought my bluetooth hands free is having problem so I bought another. But the problem was still the same. I can hear from the bluetooth device but the party cannot hear. Then I tried the same bluetooth handsfree with another Nokia 5800 express music and found it working fine. Is there anyone can help me to solve this issue. The difference between my mobile and other is the software version. I am having the latest version but the other is the first version. Is there any hardware issue or software issue with this?
I have a C3 and have a problem with the call volume. By this, I mean that it's so low I'm not able to hear the caller. This will go on for a while and will then suddenly pick up and I'll be able to hear the caller clearly. I know how to adjust the call volume and it is on maximum.
my volume up button broke somehow, without dropping the phone or something, it just stopped working suddenly. Now I have the problem that I can't increase my volume when i'm calling and I can't increase the volume of the mp3 player, is there any workaround for this?
Just updated to Belle and noticed with the opening tone that system volume was much lower than with Anna. Music and ringtone volume are fine, but applications that use voice or prompts (such as endomondo and language translator) are now barely audible.
After reading through many forums and discussion I now know my C7 has only one speaker but the problem I am facing is that the volume output is not as good as it used to be.I recently updated to nokia belle and did a factory reset... It was after this that my phone started showing this volume drop.Should I change a setting or do some kind of an update.An old Ericson phone of mine is louder than my c7 on full volume both on music player and when the phone rings.
I am useing nokia c5-00.02 mobile.I just want to know Is there any way tolock bluetooth feature completely ordisable bluetooth feature. orblock all outgoing data through bluetooth orset password for enabling and disabling bluetooth.set password for sending data via bluetoothi just want this feature because if i last my mobile or if my friends use my mobile they can only view the content and they cant copy the content.