BB Torch :: Unable To Reconnect Bluetooth Handsfree Kit?
May 6, 2011
I have upgraded by Torch (AT&T) to release 6.0.0.2342. Since the upgrade I have been unable to reconnect my Bluetooth handsfree kit (Plantronics Explorer 240 headset). When I reboot the phone I can connect the bluetooth device but when I turn the bluetooth device off, the Torch will not reconnect to the device when I trun it back on unless I reboot the Torch. Also when the bluetooth device has been turned off the Torch still shows it as being connected flashing blue LED and on connection screen. When I try turn bluetooth off or disable it in the Blackberry it does not change state without a reboot (but always shows as OFF and will not return to ON or Enabled). I have tried both soft reboots (alt-shift-delete) and battery pulls. When bluetooth is locked up voice dialing app no longer works as well.
View 3 Replies
ADVERTISEMENT
Feb 17, 2012
I just updated and configured my brand new Bold 9900 OS 7.0 Bundle 2406 for my Bluetooth devices and two of them that previously worked have issues. They pair perfectly but both devices are unable to connect a ringing call, disconnect a call in progress or initiate a phone call. If I answer or place a call from the phone, the Bluetooth device engages but the voice is only one direction. I have tried turning Encryption on & off under the device properties and no difference. I have verified the one Motorola device is listed as Compatible with my bold so what's up here?
View 1 Replies
View Related
Dec 20, 2010
I am experiencing problems connecting WM600 Bluetooth Handsfree to my handset. I've made my WM600 discoverable n scanned it with my X10 mini pro over and over but it doesn't work.
View 3 Replies
View Related
May 9, 2012
how do i Bluetooth all my phone contacts from my 4s to another bluetooth handsfree set
View 2 Replies
View Related
Nov 5, 2015
I've seen a lot of people with different Bluetooth issues but not much about what's happening to me. I assume Bluetooth is just bad on this phone. use Bluetooth headphones while I'm at work. I have to pause a lot of times obviously. Around 90% of the time I have to use my phone to continue playing what I was listening to.
Pressing play with the button on the headphones does nothing. Sometimes if it's around a minute or two later the headphones button will work. If it's longer it never works. Is this happening to other people. I am unrooted. The only change is unlocked bootloader. I am also still on MDA89D. My phone doesn't seem to want to update.
View 1 Replies
View Related
Apr 12, 2012
so I've had these Bluetooth issues since I updated my iPhone 4 to iOS 5. I've searched and searched and found nothing, so finally I decided to post my story here. First of all I'd like to point out: I've tried everything! ..but more on this below. I have a Bluetooth capable car stereo, the Sony BT2600, in my car. It works like a charm and I've been using it for listening to music via A2DP (Bluetooth Stereo Audio) since I updated my HTC Prophet to Windows Mobile 6 back in 2008. Since 2009 I've been using it with an iPhone 3G, then a 3GS, and finally with my iPhone 4, which I've owned since october 2010.Calling worked, listening to music worked, and since iOS 3, I think, AVRCP has been working fine, too.
Now to the things that worked until before the iOS 5 update:When I got into my car, turned on the ignition, the car stereo automatically tries to connect to the last connected device, so unless BT was disabled on the iPhone, it connected without problems and I could start music playback by pressing the Play/Pause button on the unit, without having to pull the iPhone out of my pocket.When I got out of my car, turned the ignition, and thus, the car stereo, off, the iPhone would of course disconnect.Here's where it becomes interesting: When I would go for another drive in my car, the head unit would reconnect to the iPhone, just as in the first point of this list.Same when starting the car's engine, which cuts the power to the head unit for one second. It would automatically reconnect to the phone and I could press the Play/Pause button twice to resume playback.Furthermore, when Repeat was not enabled on the iPhone's iPod application and the current album / playlist / podcast would end, the Bluetooth connection would remain active, which was good, because I would still be able to receive calls using the hands-free functionality of the Sony head unit, and I could restart playback by pressing the Play/Pause button on the latter.My Apple aluminum Wireless Keyboard would also connect flawlessly whenever BT was enabled on the iPhone.Also the Bluetooth tethering feature would work fine - I could just connect to it via my MacBook's Bluetooth menu, without having to do anything with the iPhone.
Since I updated to iOS 5,my car stereo doesn't connect to the iPhone unless it's been less than a minute that I'd enabled Bluetooth on the iPhone.same with the keyboard.When music playback stops (at the end of an album/playlist/podcast, with Repeat disabled), the whole Bluetooth connection is instantly lost, and can't be regained until I disable and re-enable Bluetooth on the iPhone. Which means that I can't take calls in my car after listening to an album or podcast or playlist when I forget to enable Repeat.Whenever I have to re-start my car's engine, the connection is, in more than half of the cases, lost until disabling and re-enabling BT on the iPhone.Same with tethering.
What I've tried so far:deleted all BT devices from the iPhone's list, re-paired - nothingrebooted, many, many times - nothingrestored to iOS 5.0.1 - nothinghit "Reset Network Preferences" - nothing, the BT devices even stay in the listhit "Delete All Settings" on the iPhone - nothing, BT device list still the samerestored to 5.0.1 again - nothingrestored to iOS 5.1 - nothingrestored to iOS 5.1 from DFU mode, setting up the iPhone "as new iPhone". Big step, PITA, but still - nothing. At least this has cleared the BT device list. But the issues remain.
Info:
iPhone 4, iOS 5.1
View 1 Replies
View Related
Jun 4, 2012
I just got an iPhone 4s and I did manage to get my Platronics 975 headset paired without too much trouble but there's one thing I can't figure out. On my old LG phone there was an option to drop the connection (without forgetting it) to your Bluetooth device when you weren't using it and then reconnect when you wanted to use it. How do you do this on the iPhone 4s?
View 4 Replies
View Related
Jun 23, 2012
iPhone 4S bluetooth connection to my Prius was perfect until today. Not only will the iphone reconnect but the pop-up for entering the car password does not display. I noticed that other messages mention this poltergeist problem. Is this glitch associated with an iPhone software update?
Info:
MacBook Pro, Mac OS X (10.6.8), Cable: USB to IPOD-like adapter
View 3 Replies
View Related
Oct 5, 2011
I have paired my Bionic with our courdless phone - Panasonic KX-TG6581 - The cordless phone with bluetooth link works like a headphone device, and calls can be answered on the cordless phone while at home.
My problem is that the Bionic does not reconnect to the phone after a Bionic power cycle - I have to go back to the bluetooth device on the Bionic and hit connect.
My Motorola Droid worked perfectly with this device
View 5 Replies
View Related
Dec 7, 2011
I recently purchased the C2-00 (RM-704). I have thoroughly tested the phone and am happy with its features except for an issue with low volume while using bluetooth with a hands free car kit. I know it is a basic phone but the ability to use a bluetooth hands free car kit was one of my mandatory requirements The issue seems to only be the output volume through the cars' speakers. I do not have this issue with any other phone, including Nokia C2-01 and Nokia E71, and other non-Nokia devices. When making calls the other party seems to hear me fine, indicating that the microphone volume is OK, but it is very hard for me to hear the other party even at maximum volume. Due to the road noise I have even had to pull over and stop the car so that I can have a conversation, which totally defeats the purpose of having a bluetooth hands free car kit.
View 3 Replies
View Related
Nov 21, 2012
Ever since a new software download about 3 months ago I cannot connect my Jabra handsfree to my sensation. I can make the Jabra search for it but I have lost the option in my Sensation settings to "discover" a new handsfree device. It just sits there and times out. I go into my settings and get bluetooth on and it connects to the in car handsfree in my partners car but it can't find the jabra in my car.
View 1 Replies
View Related
Sep 12, 2011
I have a 2010 Ford Fusion Hybrid with Micorsoft Sync. I had a Droid X and upgraded to the Bionic. When getting in the car, the DX always auto-connected to the phone (headset) profile and also to the A2DP profile, although sometimes the Sync screen displayed a "Connection failed" message before it always actually did connect. Previously my BB Storm 2 had no problems connecting.
When I turn the car on, the Bionic connects fine to the headset profile but fails to auto-connect to the A2DP profile. I get the same "Connection failed" message as with the DX but it doesn't subsequently connect and I have to connect it manually. This is very troubling to me as I almost exclusively use A2DP for listening to music and podcasts in my car.[url]...
View 11 Replies
View Related
Feb 21, 2010
I have an E71 and was using an old earphone for handsfree in car. Although the headphone is not high quality, it worked perfectly and I was well pleased. I attempted to use it recently but was surprised to find that my phone couldn't "see" the earpiece anymore. I have done the obvious things in bluetooth settings and even tried pairing another earpiece but still no joy.
View 8 Replies
View Related
Oct 3, 2015
When connected to my handsfree etc it turns all Bluetooth off. Not fun in car....!
View 9 Replies
View Related
May 11, 2015
My new galaxy 6 will not unlock the phone when I use my Bluetooth device. I can't find any setting that will over ride the lock. It works fine if the phone is not locked.
View 1 Replies
View Related
Apr 28, 2012
Just got the Elite Flip Thursday night (it's now Saturday morning), paired it with Moto Droid Razr Maxx (OTA .181), and yes, I am using the latest MotoSpeak. I noticed that every time I used the EF for a telephone call, once the call was disconnected, usually but not exclusively by the other party hanging up, the Elite Flip would disconnect from the phone and then reconnect. Is this normal? Is there a way to keep the Elite Flip from doing this?
View 5 Replies
View Related
Mar 24, 2012
iPhone 4 is not connceting with Acura handsfree
View 1 Replies
View Related
Jun 19, 2012
I'd like to connect my iphone 4s to my macs bluetooth. So when I get a call I should be able to use my macs mic and speakers for phone conversation I have seen bluephone elite but its outa date. Can this not be possible Apple products should be able to speak to each other.
Info:
iPhone 4S, iOS 5.1.1
View 3 Replies
View Related
Jul 3, 2012
This used to work fine. She can make a call by dialing a number on the cars touch screen, but the call only comes through on the phone.
If I connect my 3GS to the car then it works perfectly - sound comes through the speakers and the microphone in the car is active.
What did she do to turn this off and how can we turn it back on again?
We have tried:
- Unpairing and re-pairing the phone
- Telling the iPhone to forget this device
- Turing off Siri
Info:
iPhone 4S, iOS 5.1.1
View 1 Replies
View Related
May 31, 2011
I have just got an Incredible S and think its great. However I am having bluetooth connection issues with my handsfree kit. It keeps disconnecting and reconnecting. The connection only seems to last 2 to 3 minutes. I have tried it with two different kits one a Motorola T505 and the second a BlueAnt S4. Both had the same problem. I then tried a car with a factory fitted bluetooth system and it did the same.
View 2 Replies
View Related
Aug 3, 2011
I recently purchased a Q2 blue ant bluetoooth to be used with my XPRT. When I attempt to call a contact using the bluetooth device, I get an audio message that states "activating your phone in built voice command on the connected phone." "This feature is not supported on your connected phone" then my phone will display "complete action using voice commands" So in essence I have to tap the voice dialer app to make a call. So, is there another bluetooth device that is truly handsfree voice dialing that can be used with this phone?
View 5 Replies
View Related
Sep 12, 2011
I'm trying to connect my defy to my car's inbuilt hands free bluetooth but it doesn't seem to. I turn bluetooth on and make it discoverable and then scan for device but nothing happens.
View 2 Replies
View Related
Aug 4, 2015
The bluetooth handsfree connects and pairs with my samsung s6 however it won't import the contacts, it keeps saying no contacts found but they are all on the device. The car dealer says it's an issue with the samsung security so I went to where I got the phone from and they can't see an issue and say it's an issue with the handsfree!
View 1 Replies
View Related
Nov 7, 2014
I have been unable to get my AT&T S5 to iniate a handsfree call from a bluetooth device if the S5 screen is locked. This is really unsafe in the car if I must pick up the phone, enter PIN or password before I can make a call. Kind of goes against the meaning of "hands free". I expected to find a screen lock bypass for "trusted" devices or something similar, but so far I have not. My bluetooth receives calls fine when locked, I just can't initiate a call.
View 20 Replies
View Related
Dec 25, 2012
I received a new bluetooth for Christmas to go with my Defy with Motoblur (a canadian phone) and the Voice Dialler sucks plus the bluetooth instructions are just as bad.It say to refer to your phone's usual manual.So, I would like to know how I can make a call from my bluetooth handsfree using the phone.Based on an older phone I could add a voice tag to each contact and then use that on the bluetooth.This phone doesn't seem to have that option.(It all seems to work fine if I am dialling directly from the phone once the ringing starts.But this is all pointeless as far as I am concerned. How can you be handsfree when your hands are required?)
The phone is running on the Android version 1.5 since Motorola didn't come out with an update on my phone and getting a new one isn't an option.Maybe there is an app in the market place that might work. (I can't even use Google Play because the phone version was not updated)
View 6 Replies
View Related
Jan 1, 2012
I have had my Droid for over 2 years and it has worked very well with my Acura HandsFree Link. Suddenly, it told me it was paired and could not connect. My husband's I-Phone (AT&T was worked with this car as long as my Droid has. But the HandsFree has no trouble connecting to his IPhone. My Droid also cannot find my husband's Plantronics hands-free earphone. The OS appears to be the latest version as I checked and no updates are available.
View 7 Replies
View Related
Apr 16, 2011
handsfree bluetooth completely not working after the Gingerbread update? I have an 08 Titan with the built in bluetooth and everything worked perfectly on Froyo. Since the OTA update, I can pair and connect but can't actually hand the call off to bluetooth. I try selecting bluetooth on the in call screen and it seems like it tries but I get no audio at all and it just kicks back to normal phone call mode. Speaker works.
View 15 Replies
View Related
Jun 29, 2010
I am using Nokia 5800 express music. I am facing problem while using bluetooth handsfree device. It is properly getting connected and getting paired with the device but while making the call the other end cannot hear my voice but I can hear them clearly. Initially I thought my bluetooth hands free is having problem so I bought another. But the problem was still the same. I can hear from the bluetooth device but the party cannot hear. Then I tried the same bluetooth handsfree with another Nokia 5800 express music and found it working fine. Is there anyone can help me to solve this issue. The difference between my mobile and other is the software version. I am having the latest version but the other is the first version. Is there any hardware issue or software issue with this?
View 6 Replies
View Related
Nov 14, 2011
How do I reconnect a BBM buddy and their past messages that have been deleted?
View 3 Replies
View Related
Dec 4, 2011
BB desktop software on Win7 unable to link via Bt to torch 9860, it says troubleshooting needed.. no driver on win7? However it works for transfer files from PC to device.
View 4 Replies
View Related
Jan 27, 2010
My E71 used to work fine in car hands free via bluetooth - now it pairs OK but then gives "unable to create bluetooth connection" message. Another E71 works fine.
I did try (twice) to e-mail Nokia care - each time I filled in all details only to get a Gateway timeout message when I tried to send it - and all details wiped out!
View 4 Replies
View Related
