BB Pearl :: Upgrade Firmware 5.0. To 6.0. For Curve 9300
Feb 11, 2012
i have a BB Curve 9300 mobile phone and i want to upgrade my 5.0 Version to 6.0 Version. If i want to install that update: 9300AllLang_PBr6.0.0_rel2391_PL6.6.0.200_A6.0.0.534_Telus_Mobility ... i get a message that i cant install that version on my device cause i need a BB mebership?! what can i do to get a membership and how to upgrade my firmware?
On Vodafone, i go through the desktop manager, and it gets to the screen telling me to pick which applications i would like to install, then it tells me that my device has no memory to install the updates... yet if i go onto the device it says it has 130.5mb of application memory free and 1.8GB of media card memory free..
Anybody had a problem updrading software to os6?i have tried upgradig through the desktop software but after a very long download, it said error with 'Modules' but never specified what.
I am absolutely baffled by this and don't know what the problem is.
I've recently acquired my first BB, a Curve 9320 and when I linked it to the Desktop Software was enticed into carrying out a firmware upgrade from v7.1 bundle 1319 to v7.1 bundle 2039After automatically running another backup, the upgrade crashed and bricked the device, which has had to be replaced under warranty. The replacement has the original firmware version on it!Should I be tempted to try the upgrade again, or play it safe and keep what I've got?
upgraded my facebook yesterday but now it won't accept when i hit "i agree" to the terms & conditions. i have up to date software, i've tried deleting it and reinstalling it, i've tried rebooting.
After upgrading my BlackBerry Curve 3G (9300) to OS 6 bundle 2949 there's no chance to disconnect a phone call (to end a call); neither by clicking the red button nor by using the BlackBerry-Menu. I just can disconnect by putting my BB in holster or by clicking on the connect/disconnect-button of my bluetooth-headset. (Of course this works only if I'm using it and if it's connected.). Otherwise I have to wait, until the other one hangs up. But that doesn't work, if I check my voicemail, because it waits for my disconnect.
I am going to try to make this as simple and short as possible. I have a 9300 and it was due for upgrade from A T & T spouse has Iphone wanted new one not in upgrade period. Used my number to do upgrade now email doesn't work on 9300. AT & T Tech tried to help but it was a no go. They stated that Rim might have disabled something but not sure any assistance is wonderful. (even a link to fix it is fine also if it has been posted befor)
I am having a problem to upgrade the device software of my daughter Pearl 8100 from v4.2 to 4.5. The BB update web site does not recognize that is a new version of the device software available.
I finally joined the BB community and I am really enjoying my 9300 Curve.Recently I saw that a friend of mine had the OS 6 system on and I have been trying to upgrade my OS 5 to 6. However,Things I have tried so far: I have used the desktop software's upgrade function to upgrade but every time I get the message that, there is no upgrade available. I also downloaded my carrier (MTN - South Africa) specific software the "9300M_PBr6.0.0_rel1879_PL6.6.0.124_A6.0.0.448" file and installed it onto my computer. I then connected my BB and tried to upgrade but was still unsuccessful.
Yesterday, I upgraded by BB Curve 9300 OS version from 5.0 to 6.0. After upgrading my battery backup doesn't work for more than 8 Hrs on standby. How can I restore previous version of OS ver. i.e. 5.0? Before the upgrade my device was working absolutely fine.
I recently (Friday) updated my software to V6.0 Bundle 2647 as recommended by my PC.After installing the new software my phone registered on the network etc but my mail has stopped working.I can not connect to the to the email settings but can get into it via o2 website and all looks ok.Any ideas or should I roll back to the previous version ? if possible ?
My blackberry Pearl 8110 is dead. It was spinning an hour glass continuously. I took out the battery and waited for a couple of minutes then put the battery back. Now I only see the red light flashing. What should I do the rescue?
i recently purchased a brand new unlocked Pearl 9100 and on the side of the box was some Vodafone stickers but upon turning on the device i see no reference to Vodafone at all and the software version (6 Bundle 2474 v6.0.0.546) seems to indicate it's generic firmware.I have been noticing the phone changing network layers (Egde, GPRS, 3G) erratically and seems slow to find a nearer tower and switch to it to remain 3G so i am thinking perhaps Optus firmware may have optimisation for this problem but i cannot get it loaded.I have tried deleting the vendor.xml file and reinstalling the Optus 9100 firmware, and following the usual instructions found in this forum but when it finishes reading the phone it states the Optus firmware is not compatible with my device so it's all blanked out.
First thread here..Does anyone have a tutorial or link on how to remove branding from the firmware? or maybe a stock complete update or something..Is this even possible? cause everywhere i look there are only carrier branded OS..are there stock OS existing?
I got a new blackberry curve 3g a month ago. Recently the battery has been starting to act up..it dies completely in 6 hours! No bluetooth on(I never use it) I don't have a data plan, so no bbm on or whatever , wifi is barely on ( battery starts to die within the one hour I take it off the charger - about 85 percentt battery life) does this mean the battery must be changed ?
I'm not charging my mobile now, but when I open my sms folder, lightning symbol comes in battery indicator! When I close sms folder it disappears! Is it good to hard reboot the mobile sometimes?
upgrade my OS 5 to OS 6. I'm from the Philippines and my service provider is Globe Telecom. I downloaded the v6.0.0.2597. I already installed it but still cant upgrade. I opened the Apploader and followed the steps but i still cant upgrade. Heres the snapshot of my apploader. Its just showing my installed application and cant recognize the os version that i need to install.
How do I upgrade my pearl 8100 to os5 so that I can install the whatsapp application. I would to commuincate with other smartphone but when I get the link it is telling me that my os 4.5 is old and I need to get the lastest 4.6 and above to use that feature.
I have a Pearl 8220. I would like to have a Style. (I like the flips. ) T-Mobile does not offer/carry the Style unfortunately. Can I buy a Style elsewhere & just put the Sim from my 8220 in it?
I have a Nokia E72-2 Type RM-529 currently running v.022.007. I have some stability issues that I think would be resolved with the recent firmware update v031. I tried updating through Ovi suite, *#0000#, etc. and I keep getting the 'no updates avaliable' message.
1. autofit-to-screen web text.you zoom in more, the text wont fit in the screen, you have to scroll right and left to read.double-taps are almost useless, as although it zooms in to fit the screen, most cases texts are still too small to read.learn from HTC's android devices.
2. sort-by-alphabet bookmarks, is it there ? if not, please make it so, cant believe such function is not available.
3. "true" desk-top browser. try cnbc.com, it'll take you to the "mobile" version instead of the full-web/desktop verson. i cant remember a couple of other sitest, but cnbc is one of them as i follow news quiet closely.
4. being an internet device, it must give you unparalleled user-friendliness, which fixing the first 3 above would. of course people may have other feedback other than browsing experience, but like i said, being a browser device, browsing experience is paramount
I was just wondering .. my N97 was bought for me as a present and i use a 02 pay as u go simcard in it .. does this delay me from recieving updates etc? my SW update doesnt show any firmware upgrade and also neither does *#0000# current firmare version is 20.0.019 and my product code is 0587691 .. with these details can anybody on here find out when the newer firmware is going to be available for this batch please? if possible ? i have a problem with my gps not being able to keep up or locate me 130m from where i am and i want to update the firmware before getting a new gps chip fitted.