I have a sprint tour and it keeps going between roaming and 1XEV and 1Xev, i tried going to options>mobile network>network technology to set it to 1XEV but it still keeps going between roaming.
Sprint 9630: My phone out of no where went into 1xev and will not go back to 1XEV. Sprint said it is a device issue and i need to have the device replaced. I told them i do not want a refurb since my previous device had to be replaced 4 times (8350i). He said he would see what was in stock, he then told me that he could not replace the device at all since my previous device was replaced so many times. He referred me to "multiple device replacement team" who said I had had to many replacements and that he couldnt even replace the device. He said I need to go to a service/repair center so they can see the phone.
Has anyone had the same issues with the 1XEV dropping to 1xev and not coming back? My service books will not send, my HRT message will not come, (it does say sent, but I never receive the actual registration message), I cannot update profile or preferred network list (says unable to update, if problem persist contact service provider).
2 days in a row, prior to this, every time I tried to call out, my phone would make a busy signal and say "CALL FAILED: PLEASE TRY AGAIN" and when my wife tried to call, it went straight to voicemail.
Now, I am making calls ok and receiving text just not BIS data: (Internet,BBM,PIN,Email) FYI: I have not made any software updates or anything receent. I am running 5.0.0.624. Have been since May.
Any suggestions on what may have caused this and if there are any suggestions tech support left out?
Also, I really dont want a refurb, how can I get a new device as opposed to a refurb? I have had this device since Dec. 28 or 29 and have had no issues with the device. I dont want to use my upgrade since I havent had this phone a year and would like to save that for when a better device hits the stores.
Lately, about once every day or so, I find myself with 1xev. Usually this would mean I am not connected to BB data services but I am not having any connection issues or any slow data times. A batt pull puts me back to 1XEV. What's going on here? I'm USCell, running Alltell's official .419 with no issues.
I have a problem with my dear BB 8530. Basically, I cannot connect to internet through BIS when I am in connection mode 1XEV, that means that I am inside the EVDO net. Once I make a web page address request or update twitter, the device remains 10 secs trying to get response from the net and later it switches to the 1X connection mode, and is in this mode that data access works!!!!!
My mobile company gives me a procedure to apply "provisioning" to my mobile but, despite introducing new provisioning password and check all, I have been suffering this flaw on my cell phone!!!Well, I need help! is there any diagnosis procedure to know if the problem is the cell phone or a net configuration problem?
My tour on the signal portion of my tour has shown my phone to be 1X instead of 1XEV...anybody else notice that with their tours or any other blackberry handset? Or is it just a Verizon thing?
I have bought a new BB curve 9300 about 3 months and all of a sudden last night the trackpad started jumping around on screen. If I move it one place up it jumps down or to the right.
I'm new to the forum and have some frustration after "upgrading" to OS 6. I have a Curve 3G through Verizon Wireless, and when I got it a month ago all was great with OS 5. I updated it to OS 6 when it came out a couple weeks ago from VZW, and since then have had a ton of problems. The first was battery drain, which was solved by removing BBM. The second is more frustrating. Since the upgrade, my cursor seems to jump out of my text message or email very easily while typing. I also notice that when selecting apps it seems that my trackpad jumps around quite easily. They both seem to be exaggerated when outside or sitting near a light or window. It almost acts like the trackpad is effected by light and is causing the cursor to be moved out of my message or around my screen since I've updated software versions. I have tried several battery pulls without success and while I enjoy the new features of OS 6, I don't enjoy the hassles. I feel like the only way to solve the issue is to go back to OS 5 untl there are some patches to fix some of these bugs.
Since the time change on Saturday night, my phone keeps jumping between two time zones. I have tried resetting it in the set up menu and turning my phone off and on again. Any ideas why and how to fix it?
My screen on my Iphone 3S is jumping ever so slightly, this just started, I have power it off and then turned it back on and its still doing the same thing,
My brand new iPhone is acting in an erratic way. She I push to start an app, something else happens. Other apps open (close), the screen jumps around, etc.
Samsung Galaxy S5--the keyboard recently started jumping up and down on the screen. I have tried a factory reset of the phone, but it didn't resolve the problem.
I updated to the 2.3.4 KG6 firmware and rooted with Chainfires kernel. I have now resolved an initial problem I had with magnetometer using GPS Status. But the GPS is still about 50m off at times and jumps about, a few hundred metres (sometimes it says I'm in the middle of the Mersey River, ha ha). I have Fasterfix installed but it's not making a difference and GPS Aids v3 doesn't work.
I'm having trouble with my new iPhone 5s, I'm using the latest software iOS 7.1.2.
I justĀ got the phone today and set it up no more than 2 hours ago And what im experiencing is when I scroll down the screen will jump back to the top of the page I'm on. When I do scroll successfully my finger remains on the screen but the screen keeps rolling down quite quickly. Pressing buttons sometimes won't register and when it does it registers on a letter or number near the one I chose, I understand it could be because I use my thumbs so I've tried index fingers and get the same effect.
Also dragging apps won't work as when I try to do it, it's like I'm removing my finger from the screen and the app jumps back to the original place.
I've done a hard reset soft reset wiped the phone started from scratch cleaned the screen even washed my hands, and still no solution.
Ok, today, I just started having an issue where my screen seems to jump around. I've had the phone since February, and no issues until today. I fear it is hardware, but want to try and get a second opinion. [URL] ....
No Browser is running and I dont have any apps. I was on the phone for 15 min and my battery was half dead when I got off. Was never like that before. I've had this phone for almost 2 years. The same thing is happening with the rest of my families Blackberrys. Why is this?
I was given a BB Curve 8310 to attempt a repair. When I attach the USB cable to the BB the system tray does not pop up with a notification that says "found new hardware" like it normally does when you plug a BB in. When the phone boots up it displays error msg " JVM Error 513". I attempted to looking into the device by using "cracmem" and "JL_Cmder" and no data is to be found and thus there is nothing to wipe. I suspect that the device has already been wiped thus the no data. I have pulled the battery from the phone and reinstalled; unplugged the usb cable during the BB boot process and nothing is happening. The DM application loader will not allow me to procede due to computer not recognizing the BB device thus it is not generating the "USB:UNKNOWN".
I installed the BB desktop manager for Mac yesterday, and this morning connected to remove some apps, create some space, and install all the updates. In the process of this it mysteriously just stopped doing anything right after it said "database cannot be backed up" and shut off. Now it's flashing red twice, pausing for about 2 seconds, and repeating the flashing. I pulled the battery and sim even though I was sure that wouldn't do anything, plugged it back into my laptop, plugged it into the wall both with and without the battery, and nothing has changed. The desktop manager doesn't not recognize the device at all.
I'm using a Curve 8330. Is there anything I can do or am I screwed totally? Also, and I know this is a long shot, but what are the odds that I can restore the device and save the data that's on it?
I've had my 8330 Curve with Verizon since November 2008. Very happy with it. I also happen to still be using OS 4.3.0.127 (202), which is what the unit came loaded with. I never bothered upgrading because I would always hear of people having issues or DM only backing up your contacts and not your apps, lower music volume, etc. I don't really need Docs To Go, but HTML e-mail would be nice and the biggest thing is trying to improve these BBM delays I constantly get when trying to send a message. I'm thinking an upgrade to the latest BBM might help change that.
Of course, in order to do that, I need to upgrade to 4.5. So I've decided to do it, but not before I ask for feedback here. I've scanned dozens of other threads here, all with varying opinions. It's been long enough. Is it wise to do this and, if so, what is the latest OS for VZW (is it .138)? What risks am I really running here? Need a reality check on this.
I don't know if this is possible or not so I thought I would ask here, is it possible to alter the way the menu functions in the blackberry curve? in example, what I want to do is like when I send a sms text message and when I hit the trackball and the menu options come up, the send button is highlighted, and what I would like do is modify it so that the check spelling is highlighted first and then send button is right below it, is it possible to do this or is this an internal Blackberry Software modification?
Each time I go out and return to sit back at my PC, OVI Suite window jumps out.Now dear developers, if anyone reads it - this issue is dreadfully annoying and has been reported on many forums for a really long time.Yet on all the threads I've seen (at least here, at Discussions) I have seen no single entry saying "we will fix" or anything.If coding a simple checkbox "do not pop out" is really that hard, then at least say "we will not fix it". Just few words of information would be sufficient.