IPhone 5c :: Can No Longer Add Music To Phone After Using Tones
Aug 25, 2014
I got a new iPhone 5C and I am trying to make tones for it.¬ I used an app to make a tone and when I enable Syncing Tones All Tones I can no longer add music to my phone through iTunes.¬ When I try to drag and drop a music file the icon has a red circle with a line through it.¬
I remember before the 3gs came out the only way to get custom sms tones is to make it the same name as an original sms tone but they had to be short because you cant stop them no matter what buttons you press.my question today is has anyone found a way to make longer sms tones that can be longer than a couple seconds...i guess im just used to hearing my favorite songs play when i get a text so if there is away please feel free to let me know.
I was syncing my phone today, and I realized that my music was taking up way more space than I thought it should. That's when I noticed there was way more music on my phone than I had synced to it. ¬
In iTunes, I unchecked the music and tones tabs for syncing, and the bar shrunk down, but not completely. There are 20 songs taking up almost a gigabyte worth of space sitting somewhere on my phone. They're not voice memos because I don't have any of those, and I don't have any other music downloading apps or anything like that on my phone. I can't figure out where these songs that are taking up so much space could be coming from.
I am no longer getting sound from the phone - the ringer does not work and I can't play music.I have tried taking out the battery and it still does not work.The last sound I heard was the alert for a text message and it does not do that anymore. I can hear fine when talking on the phone.I would appreciate help with this as I have not found an solution that works yet.
I purchased an album of Alert Tones off of iTunes, but they appear as music on my iPhone, instead of as tones so I can change my alerts in Settings > Sounds. All of the tones are only 3 - 5 seconds long, so they clearly are not "songs". I cannot figure out how to "move/convert" them to being sounds (alerts), not songs/music. What makes me even more crazy is that if I purchase a single tone, it will go into my Settings > Sounds as an alert/ringtone, but when I purchase the whole album of alert tones, they are saved as music.
I recently upgraded my 9700 to 220.127.116.115. Ever since then, my ring tones have been kinda' messed up. First off, when I upgraded it changed all my ring tones which is fine because I remember them all. But now when I go to change them, it only let's me choose music as ring tones. All the standard ones that came with the phone are missing, and those are what I was using. Is anyone else experiencing this problem or know how to fix it? I don't like the ring tones it's using and would really like to change them back to what they were.
My question has nothing to do with a hardware issue. In itunes I have about 300 or so ringtones in the MUSIC folder. How I did that is beyond me. I would be grateful if someone could tell me how to move them all to the TONES folder where they belong.
My job requires me to carry a Blackberry and it has one feature that I wish was available on the iPhone: It waits until I finish a phone call before it beeps or buzzes to tell me that I have a new email, text message or other notification. Is there a way to tell the iPhone to "hold my messages" until I hang up?
I have a song from my music library set as my ringtone and as far as just using it when it turns on it works fine. But if at any point I go to play other music in my music library, it turns into a generic alert tone, until I power my phone off and back on. I figure if I could stop the music in my library instead of just pause it that would work, but I see no way to do that.
I used to have a pc and set up my iphone on that device. The PC is now gone so the only place I have the music and my play lists exists on my iphone 4. How can I get the music onto my imac and subsequent iproducts, Ipad, Iphone 4s?
the dial tones when typing a phone number on the normal profile of the blackberry is ridiculously loud. You cant keep your headset on or earpiece in without hurting or even damaging your ears. It is extremely annoying to have to take out your earpiece every time you dial someone. Setting the profile to vibrate or silent is no option of course because then you don't hear the phone ring.How do I set the dial tone to silent or much lower volume without reducing the phone ring volume on a BB Bold 9900?
Suddenly I found I was no longer able to play music through any external speaker or headset on my BB Torch. No one seems to be able to solve problem. BB Replaced but same problem. Complete factory reset solves problem but as soon as anything is restored, problem returns. Interestingly, if I make a call the headset works fine. If I play music, go to menu and try to 'activate headset' I get new window with headset and red dot on it. Coupled with this problem I notice if I go to 'set-up' and select 'email accounts' it will not open. I have had to activate all my accounts via my laptop.
I was using msu and p2k commander to transfer music to the phone. I got about 20 songs that are in mp3 format over to the phone when p2k commander disconnected the phone. Now I shut down the phone and turned it back on and now I can no longer access the v cast or my music. I have music on the memory card and phone, but it will not let me play any of them. So here is what I have tried to do to correct the problem. I did a reset and a master clear and that did not help. I tried to reformat the memory card #3457* and that did not do anything just display the numbers that I just showed you. Any help or point it the right directions would really help out. I am about to do a flash and a reinstall of the Verizon firmware to see if that would help. If I don't need to install that firmware please let me know. Thank you all that reply back to me. yes my carrier is Verizon I have the razr2 v9m cell.
just got my motoactv a couple weeks ago and wear it daily and use it in the gym while working out. I actually like the headphones but now im having a problem with the headset not changing tracks while pressing the button. Do i have to initiate a return for the whole motoactv or what? I want to be able to use the headphones as designed, its one of the most useful features.
Im new to these forums so bare with me while i try to explain my problem. I created a new thread because i dont think anyone has done something as stupid as i have ... although if there is one you can redirect me to with a problem exactly like this then do that by all means
I've been running an iphone 3GS with firmware 3.1.2. jailbroken with blackrain and unlocked for quite a while now and its been working great.Although recently i jailbroke my friends ipod touch with spirit, and seeing how easy this was i decided to give it a go with my phone (i backed up before hand so if things turned sour i could just restore and reload my data).
After i tried this spirit jailbreak, the phone entered recovery mode so it obviously didnt work. But the problem now is that when i try to restore it via itunes to 3.1.2. i get an error message which is something along the lines of "The iPhone could not be restored because the device isnt eligible for the requested build".
So seeing as i couldnt restore it to factory settings this way, i tried re-jailbreaking it using blackra1n which i have used before as mentioned. However when i do this now it seems to look like its working (the guys face comes up) but when it reboots it just slips back into recovery mode and blackrain automatically tries to jailbreak it again. This cycle repeats itself indefinately.
So basically my iphone is in limbo as i can no longer restore it to factory settings due to the firmware error and i cant jailbreak it because blackrain is no longer doing it for me (ive tried re-downloading blackrain, and doing it on a different pc to no avail).
After a recent update, my music library will no longer sync, nor does Ovi suite see any files on my E7 (which are really there). After attempting to sync, it will come up with the message "failure to sync". Oddly enough, contacts etc all sync without a problem and there is no problem listening to the music on the E7. I can copy music directly from Windows Mediaplayer, but that will cause the album not to show up in the albums on the E7 (though they are accessible through the file manager and then all works again.
I'm using the Google music player with songs stored on my SD card in a directory I created (MyMusic"artists""albums") and they are in MP3 format (copied to desktop using RealPlayer). Prior to ICS, no problems and all was fine. After I upgraded to ICS, now when I look under Artists they all display however when I display Albums only 4 show: Unknown album/Ozzy Osbourne, Unknown album/Unknown artists, comedy cuts/Unknown artist and notifications/Paul Oakenfold. If I select an artist to play, it ends up playing all songs as the majority of the music now appears under the first album above. I trying to find an index file or something that may have gotten corrupt to delete but no luck. All songs play fine, just lost the ability to organize these as they appear on the SD card.
Hi everyone. Hoping for some help with a bizarre issue. I switched from an iphone 3gs to an android a few months ago, but when some (not all) friends w/ iphone's text me, it tries to send it as an imessage from their phones. I don't receive the texts for hours at a time. Is there something I can do to prevent this? Or is on their end? This has even happened with people who I have exchanged numbers with well after I made the switch from iphone to android which I find particularly weird.