IPhone 4 :: Upgrade To IOS 7 Now Seem Sensor Not Response On Screen
Sep 8, 2014
i recently upgrade my iphone 4 to iso 7. now my screen black out and all of sudden it ok. but after few min and now black out again. I press the home and lock button many time and it show picture on the screen. but all of sudden the picture gone again.
I'd like to readress this issue as it hasn't been resolved yet. After returning fromm sleep mode the pressure sensor needs at least two activations from apps that use the sensor. When running my self-written app, the sensor at first doesn't respond at all, only after activating any other app. Interestingly enough, when doing repeated calls to the sensor, it starts responding the very moment it returns back TO sleep mode...
I having the problem after update my X10 to android 2.1. I found that my screen light sensor (which actually works b4 under different environment lighting) and the LED notification light (it works b4 while I got the missed call or sms) do not work after update to android 2.1... One more is, the screen color gradation seem worst that b4...is it normal?
I've just bought a 5230 and I'm really annoyed that I don't have the functionality my E51 had where if it was really dark the screen would dim down. This is an important thing to me since I tend to read at night and I dislike having to go all the way to settings and so on.
Do you know any piece of software that could change screen brightness based on the light sensor readings?I'm just amazed the phone software doesn't do that on its own but hey s60v5 is worse than s60v3...
I was using my phone in the morning and there was something wrong. The screen did not response at all. So, I tried to turn if off. It does not allow to turn off. What should I do?
I just noticed that when I press the home screen button on my iPhone, it takes about 2 or 3 seconds until it responds. I compared it to my brother's iPod touch that has iOS 4. My iPhone is slower than his. Can anyone explain this or give me some advice on how to fix it?
I have new iphone 5s, some time it shut down it self, the screen color changes to blue or gray with no response of the phone and the end shut down completely.
Getting used to the new look with lollipop but ever since the upgrade my screen goes black and doesn't respond at all during a phone call. Have tried pressing all the buttons but always have to wait until the call ends. This makes it worthless during calls, especially if there is an automated system. The only time it does work is when using Bluetooth.
I left my phone on my desk for 5 minutes and when i got my it wouldnt turn on, theres no light or anything, ive tried the factory reset with no response and ive tried plugging it in and still no response. is there anything i can do to fix it?
When i'm on a call, with the phone to my ear, the screen wakes up and FaceTime/Speakerphone suddenly turn on. Anyone else getting this? And I had the 3G before so i'm not 'holding it wrong' or anything..
I have an LG G3 and every time I am on the lock screen and I cover the sensors (I think it is called the ambient light sensor or proximity I am not sure) the screen turns off, even if I use the physical power button and not double tap to wake. It makes it difficult to use while in an arm band case, also when trying to check it while keeping it inside my back pack since it keeps going off until I take it out and unlock it.
After last update my screen doesn't respond when I touch the right hand side of the screen. The only way to type text is in horizontal position. When I try to draw with Sketch app, there was a vertical line in the right side that don't respond on my touch and stays blank. I didn't drop the phone, glove mode is not on, e.t.c.
I want to buy an ant+ Cadence sensor which is really inexpensive and I'd like to know if I could pair it and use it as a SPEED sensor for my bike. Since a cadence sensor just counts how often the magnet passes by it then I guess they are the same as speed sensor.What would be the steps to complete this? or are the profiles baked in the firmware of the sensors and there's no way for the Motoactv to profile it as a different type of sensor?
My screen has a delay in response and is intermittently able to send and receive calls and texts. T-mobile has done everything they can and it didn't solve the problem. What can we do?
LG g4 proximity sensor always on when screen is turned off.
If the screen is on, but before unlock, proximity sensor is on as well. It will turn off only after unlock the screen to home screen.
Will it cause battery drain and infrared light burned out/dead after being *"ON" all the time?
It is infrared, so you can only tell if you use another camera or phone look at it. it is easy to test, just look proximity sensor with another camera or phone camera (that can see infrared, can be test with your TV remote)....
Screen turning off when blocking the front sensor next to the front camera? I had my G3 for 6 days and I started to notice today that every time my finger hovers over that sensor the screen will turn off.
I recently cracked my screen on my sony xperia z3. When I turn the phone from it's sleep mode, it automatically presses random buttons because the screen is broken and the sensors are all messed up now.
I'm currently using an OTG adapter to navigate but, I'd like to know how to turn of the screen touch so that it doesn't randomly hit apps or buttons while its on and instead uses the mouse via the OTG adapter only. is there a setting/option to do that?
Issue with the proximity sensor shutting the screen off when you're about to key something in or multi task while on a call? The phone keeps shutting the screen off while I'm on call. This usually happens when I have to use the phone to search for something or enter in a number, multi task, enter extension ...
Since my last software update my G Sensor has stopped working, and as a result, my screen will not auto rotate. The top G sensor level (horizontal) is stuck to the far left but the bottom one works.
When talking on the screen are activated any keys - the media, the button to turn off the microphone. Sometimes when you dial and put the phone to the ear he cut off talks. Proximity sensor works and the screen fades to where my ear. I do not know how to obtain it but it is very nasty. Version of software after the update is 30.0.003 but the problem remained.
I use Zooper Widgets on my Widget Locker lock screen but it seems like using the fingerprint sensor isn't possible with Widget Locker. Is there any way to use it on a lock screen other than the stock lock screen? Another app? Or is there any way to use widgets on the stock lock screen?
I have noticed that when I start a call and put the phone to my head (or hand above the sensor) that the screen stays on. I do know that the phone's "pocket mode" works, which tells me that the proximity sensor is functioning. Faulty or non-existant software for the phone app?
My iPhone's proximity sensor has all of a sudden started sticking to "screen off" even after I remove it from my ear. It's getting very annoying, especially when calling companies with those menu driven phone answering systems. Anyway, does anyone else have the same problem?
I'm enjoying using it to turn the screen on with a verified fingerprint, but find myself at times thinking that long pressing it will also turn it off. Seems like a neat feature, but before I think too much of it, is it something that can be done?
Proximity sensor in my lumia 920 turns the screen off even when i am holding the phone in my hand and am looking at it. It should turn it off only when I hold it up against my ear.This is verry annoying as I cannot get to the incall screen at all, not even to disconnect the call. I have to wait till the other party hangs up so that my screen can return back.
My X10 with 2. 1 doesn't lock the touch screen when I'm on a call. When I'm done with the call the phone is in various places on the phone book. The phone is set to lock at 2 minutes for various reasons and I don't want to change that only when I'm on the phone call.