i recently tried flashing my v3m to altell. But it fail in the process and now it just shows the altell boot then goes to bootloader mode. But when trying to reflash it gets to flash group 2 and fails. I used rsd lite and radio comm. FLASH FAILED: Tx RQHW boot cmd failed. Boot Command: RQHW M-Link error 0008: DeviceIoControl() result falied during USB device I/O.
View 3 Replieshad a slight moment where wifi had shut off.. but it fully downloaded.. pressed install.. and it installed.. (i think) but it booted up to the bootloader screen.. says:err: A5,69,25,00,27battery OKOK to programconnect USBData Cable
View 13 Replies View RelatedTotally stock Defy, upgraded to 2.2 and on its 2nd ear speaker.While in the browser the phone froze compleatly, so after waiting a while I pulled the battery, and on restarting it went straight to a bootloader screen.Then when i connect to the PC it, just changes the last line to Transfer Mode OK.I have tried the Start button and Volume rocker switch, but this seems to do nothing. Please tell my "Life proof" phone isn't dead before my 2 year contract is up!? I have tried googling, but all the help I can find, seems to be for people who are rooting their Devices, I would just like to state that is not what I was, or am trying to do.
View 1 Replies View RelatedUpon turning on my Triumph, the phone states the phrase "Incoming Download Mode" once, then repeats the following message over and over, on a black screen: "polling, get oemsbl_mode = 1". Apparently this is the bootloader mode. I am Not inadvertently or intentionally holding down the volume down button or any other button at the same time as the power button, as many forums mention as the possible problem. I have tried: pulling the battery for hours; pulling the battery and holding down the power key for 30 seconds; pressing the volume up and down keys a lot when the phone is off and the battery out (in case up or down volume button is stuck), then powering up the phone. In none of the above scenarios is the phone connected to anything via USB cord. At the time my phone developed this problem about 48 hours ago, I was simply surfing the web on my phone.
View 6 Replies View RelatedI'm about to fully flash my device back to stock. I have a o2 UK variant s6. I have downloaded the correct 5.1.1 rom via sammobile. However the worry I have is about the bootloader, do I have to do anything with it.
View 3 Replies View RelatedHow can I flash a custom rom on the new bootloader??? I installed 5.1.1 to my G920F but I want a custom rim 5.0.2
View 3 Replies View RelatedIs it possible to make a backup of bootloader? If it is, how? I am not talking about kernel (boot.img is the kernel, correct?), system, recovery, or data. Bootloader.My Nexus 5 came with bootloader version hhz11n. The factory image from Google (4.4.4) has bootloader version hhz11k.
How different these two are, but since hhz11n image can't be found anywhere, I want to back it up before flashing to Lollipop or Marshmallow.
My Nexus is still running 4.4.4, bootloader unlocked, rooted, with TWRP installed.
I have flashed various version 5 stock firmware's and the latest 6.0 using nexus tool kit, as well as specifically flashing only stock recovery using the tool kit and I cannot load into the stock recovery. I've spent hours looking for information on manually flashing the stock recovery without the tool kit but have found the instructions very vauge. Any information on flashing manually only the recovery would be very useful or information on why I may be having this issue.
I know every time i flash a rom it only shows about half of my internal storage. I have a 32gb version. So I end up having to go into a recovery "temp flashed" using the tool kit in order to clear some information and then i get my 32gb's back.
I"m wondering if the space being auto allocated or partitioned is interfering with the flash of the recovery..
My HTC one M7 is booting up and then immediately going into the bootloader. At the top it says Tampered, Relocked, and Security Warning. Im using the HTC one M7_UL with S-ON and hboot 1.57.
Things i've tried:
Factory resetting the phone doesn't work at all.
I've tried using Fastboot ADB to unlock the bootloader, but windows 8.1 doesn't reconize the phone and the cmd window keeps saying "Waiting for device" when I try to find the identifier token.
So I fell asleep with my phone when i woke up it was on the bootloader screen, I thought this was no big deal and just had it reboot as it boots up it goes directly back into the bootloader. Ive tried everything apart from factory reset.
View 1 Replies View RelatedAbout 3 years ago i bought an HTC M7. And yesterday i tried to unlock the bootloader for the first time using HTCdev and all went well. I also managed to install CWM at that time. When i tried installing a custom marshmallow rom i received several errors and decided i wanted to revert back. So i relocked the bootloader but now i have no os installed and if i try unlocking the bootloader again i get stuck on white screen with htc logo and purple letter at top entering recovery... After this screen i have to wait for the battery to die before i can do anything with the phone again (stuck)
I have tried flashing a different recovery file but i keep getting remote: signature verify fail. Without unlocking bootloader i cannot get anything to work. I have no working mobile phone atm.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
[code]...
I have a nexus 5 that I was preparing to hand down to my wife. I had transfered everything over to my new phone, and initiated a factory reset. It rebooted to the "erasing" screen, and sat there for about 20 minutes, before switching to the dead android screen (w/ red triangle.) I thought that was odd, did some searching, and tried the recovery mode from the bootloader. That produced the same results. So now I'm stuck.
From the boot loader I can access the following options:
Start -> Erases for ~20 minutes, then dead android
Restart Bootloader -> Screen goes blank, phone vibrates, and then back to the bootloader screen
Recovery Mode -> Erases for ~20 minutes, then dead android
Power off -> turns off the phone
I called Google, and the tech support hadn't heard of anything like this. Because it's almost two years old, he transferred me to LG's tech support, who basically said find a local repair shop, or they could RMA it for an unknown cost.I'm pretty sure the phone is bricked at this point, which is frustrating, because it was running stock android - completely unmodified. I think I might have rooted it once, months ago, but I can't imagine that that would have caused this issue. I had even received and installed Marshmallow OTA, and it was running perfectly.
Anyway, some program I might be able to use on the PC to regain access to my device.
Literally the only information I can provide about the phone at this point in time is as follows:
Product_Name - hammerhead
Variant - hammerhead D820(H) 32GB
HW Version - rev_11
Bootloader Version - HHZ12k
Baseband Version - H8974A-2.0.50.2.27
Carrier Info - None
Serial Number - 047....
Signing - Production
Sercure Boot - Enabled
Lock State - Unlocked
My Dad's HTC One M7 is stuck in the bootloader screen and is unable to boot to the main OS.
The phone has never been unlocked or rooted, I've never even seen the bootloader screen until now. The first thing it says in the bootloader screen is ****LOCKED****.
The only information I know is that prior to this, he was prompted for a system update which (he says!) looked official.
I've tried every option in the boot menu (fastboot, bootloader, recovery, recovery reset) and it just goes back to the main screen.
Is there a key combination that I'm missing? Was the system upgrade corrupt? I know next to nothing about Android bootloaders.
I have tried Googling for hours but all the results are from people trying to load a custom ROM or unlocking the bootloader - nothing about a 'normal' installation.
I flashed my LG G3 Because i felt that the sound was not working anymore and that it can be a software issue which it was a hard ware issue ( loud speaker wasnt connected because of screw) Anyways preformed the stock FW Flash following the guide that highonandroid provided to go completely back to a stock rom. After flashing i restart phone and the boot takes forever until it finally hangs on the tmobile screen. there was a point where i left it over night to see if it will turn on but it still hung for a good 8 hours. Ive done everything i can which can be that i preformed atleast hundreds of hard resets but nothing is working.. there was a point where i did manage to turn it on then i tried updating to lolipop and when it reboots the bootloop is back..
View 2 Replies View RelatedI flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
It's the 3rd time in 2 weeks that my iphone suddenly goes dead. It gets stuck on the apple symbol that goes on and off. I hard reseted it and recovered from icloud backup.
Is it the 8.1.1. software o could it be a hardware problem ? My iphone has 64Gb capacity and it had only 9Gb free. I can´t replay the crush, so if I now take it to a Mac support center, they will probably say the iphone is ok..
Info:
iPhone 5s, iOS 8.1.1
Just wanted to upgrade my sisters phone which was running an old 5.1 version (custom rom, so the phone was unlocked and rooted already) to an android 6.0.1 custom rom. So I flashed newest twrp and flashed 6.0.1 bootloader and radio.img via fastboot using wugfresh tool and the files from the thread on here. now when trying to get into recovery, I am stuck at the google logo.
View 5 Replies View RelatedI rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies View Related1. I have knox tripped
2. When i flash stock with smart switch i get stuck on samsung boot logo
3. Same thing with odin....stuck on samsung boot logo
4. To get the phone working and boot to desktop i flash custom kernel like unikernel
5. The problem is i want to use stock kernel i want to flash with smart switch and i want to get updates from samsung like i was before because when i use unikernel and i try to updates phone said your rom is modified...
Is there any chance to bypass samsung logo without flashing custom kernel...
Flashing a ROM and got stuck on the checking connection page in set up if so how did you fix it?
View 3 Replies View RelatedI recently flashed android 6 then i flashed twrp n then when i flashed supersu my phone is stuck on boot... How can I root my phone when it is getting stuck?
View 1 Replies View RelatedSo I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
According to here the Milestones bootloader has been cracked. Hopefully it wont be long till custom roms! Hopefully it wont be long till 2.2!
View 4 Replies View Relatedmy motorola droid x, stays in the bootloader screen and will not come out and sends me an error (a5, 70,70,00,1 f).
View 2 Replies View RelatedIf Moto does not unlock the bootloader shortly for my Atrix I will be selling the phone and moving to a Samsung Galaxy S II as soon as it's available. Moto, provide a date as to when you will provide an unlocked bootloader. I know this is a hot topic, but if you can not keep up with Development then allow me as the owner of the phone to do as I wish. Take samsungs lead and send your phones to CyanogenMod
View 9 Replies View RelatedUnlock the Bootloader on the D3!
HTC is unlocking their phones.
I'm writing to ask for your favor - Please provide us, some enterprising Defy (MB525) owners, a way to unlock the bootloader.Rationale:1. You are providing means to unlock the bootloader on many newer devices already, and it shouldn't cost you much to provide us a mean to unlock the Defy as well.2. The warranty of many of our Defy devices is expiring, so even if we brick our device, we couldn't file a warranty claim anyway.3. The Defy is the 2nd most popular devices running CyanogenMod according to http://stats.cyanogenmod.com/, so we have a huge following.4. If you allow us to unlock the bootloader, we will consider it as a gesture of goodwill and will be more willing to recommend our families and friends to buy Motorola devices in future.
5. Many other manufacturers have started to unlock their bootloaders and by comparison, Motorola is doing very poorly and has a bad image in our mind.6. Many of us bought the Defy without any carrier subsidy.7. Come on! Give us a Christmas gift, okay
In the unlock FAQs, it is mentioned that the bootloader can be re-locked. However, I can't seem to find any instructions on how to do this. So, how do you do it? I've only unlocked my bootloader. Everything else about the phone is stock. I haven't flashed any new ROMs or anything else.
View 5 Replies View RelatedI am a Milestone user and I want my booloader unlocked. I live in Romania and I have to inform you that you are in breach of the Romanian Constitution. My Milestone is not carrier locked and my owner rights are guaranteed and protected by the Romanian Constitution.
View 1 Replies View RelatedWell I wanted to start a poll, but the forums wouldn't allow it.Anyways lets send Motorola a message why us "The consumer" would like the bootloader unlocked.
View 3 Replies View Relatedthat Moto continues to support the Photon, with ICS in development for Q4. However, there are community developers that could have a fully-complete, stable ICS build ready in a matter of WEEKS if Moto were kind enough to unlock our bootloader and provide us with a few updated drivers.Would it not be good customer service to provide users with this? Would it not improve customer loyalty? I am a big fan of Motorola devices, but I can see why people are being driven away by their locked-down nature. I implore you, Motorola, to please provide an official unlock tool and make available updated driver libraries and/or source code.
View 9 Replies View Related