Motorola Smartactions :: Not Resetting Sounds By Triggering Timeframe And WiFi Connection?
Jul 10, 2012
I use SA to turn off my Ringer Volume, Cellular data and start VIP caller mode. The triggers are Timeframe and Wi-Fi connection. I use two different ones, Sound Weekend and Sound Weekdays. Both have different time triggers but the same Wi-Fi connection. They do turn off correctly but here is the issue, they do not return the Ringer Volume back on. I had both the time triggers on one SA then when this happened separated them as above. I did not have this issue until ICS was installed.
View 15 Replies
ADVERTISEMENT
Oct 11, 2012
The ICS update installed flawlessly and was working without issue until last night. I noticed that my personally assigned ringtones and notifications were suddenly gone. I went through the tedious process of reassigning all the sounds again and all was good, until I plugged the phone into the USB port on my pc to charge. I'm aware the SD card is not identifiable when plugged in, so I thought to move my personalized sound app back to the phone, but after again reassigning the sounds, they get "lost" when I plug the cable into the USB port. This seems to happen randomly, because overnight, my sounds were "lost" and the phone was only plugged in to a wall charger. I Googled and it appears the problem did occur on other phones when they received the ICS update
View 14 Replies
View Related
May 3, 2012
I have an action set up to start the Pandora app whenever my phone bluetooth connects to my truck. For some reason, today the action is active while I am at home and with no bluetooth connection. I rebooted the phone, but the action starts up again. Having the phone's bluetooth on or off doesn't seem to make a difference either. I tried toggling airplane mode on/off with no change. I tried deleting the Action and creating a new Action with the same results.
View 3 Replies
View Related
Jun 24, 2014
I've had a grey area over my wi fi button, and this stopped me from using wi fi, I couldn't turn it on or off it was frozen. so I looked it up on the internet and support and followed. I reset the network setting and it worked.... however its happened again and after resetting the network settings. I reset the full phone and erased everything. so I've done that. now i am stuck with an iPhone 4s that wont allow me to search for a wi fi connection to activate the phone. its suggesting i activate through cellular ( no internet on sim so cannot ) or I have to type in the name of the wi fi and security and password. tried to enter it and it freezes but still shows that its joining when it clearly isn't. my opinion is the full WiFi on the phone has malfunctioned and I cannot activate the device because of this.
View 2 Replies
View Related
Jan 13, 2012
I love Smart Actions, when set-up correctly, it truly makes my smartphone, a smart phone. I do have a question though. Why is it that WiFi MUST be enabled to use location services, and is there anyway to use location services to turn off WiFi when I'm not in range of a usable network? I have WiFi at work and home, but when I'm not at work or home (driving for example) my phone is constantly searching for wifi. Considering that I'm on the road a lot and I go to school at night, that's a lot of time that my phone is both on 4G and Wifi, which almost defeats the purpose of a battery-saving app.
View 7 Replies
View Related
Jul 2, 2012
I love the idea of smart actions, but I constantly seem to have issues. I always have problems here and there with smart actions on the GB software, but I recently upgraded to ICS and I was hoping it would be improved. I see there is now an option to allow the phone to detect its location without needing wifi which is nice, but I still cant get it to work.
I have a "Work" smart action set up, but even right at this very moment I am at home and it thinks I am at work. I am even connected to my home wifi on the phone, still thinks I am at work. So I manually shut off the work smart action, and then re-enabled it. A second later it pops up that I am at work again. I open up the "Map" App and it shows me at home, why in the world would it think I am still at work.
View 4 Replies
View Related
Nov 13, 2011
Why do we have to constantly keep our Wifi connection on thoughout the day for Locational Smart actions to work properly? Why cant we have Location in Trigger and Wifi(on) in Actions since its also using our GPS location to location us and Wifi for more accurate location?
View 2 Replies
View Related
Dec 24, 2012
I have SmartActions set up to trigger when my location is home to turn on WiFi and turn off data. Similarly, I have a trigger when I connect to my Bluetooth in the car to turn off WiFi and turn on data.
The problem is when I am leaving the house but not going to the car. Is there a way I can determine that I am leaving my house or disconnected from my home Wifi so that I can turn WiFi off and data on?
View 3 Replies
View Related
Jul 12, 2011
I have had the Milestone 2 for 5 months now. Last week, the keys on the slide-out keyboard started double triggering - not always and not all of them, but it started with the "o" & "p" & seemed to spread. Turning off & removing battery has made no difference. It definitely is not the way I press as I had zero double triggers until this moment. Is there a way to reset the repeat rate?
View 5 Replies
View Related
Dec 18, 2015
I can't get past the checking connection stage on my phone. I live behind great CHinese Firewall. When I first got the phone I set it up at work which has a VPN-ized network. I waited until my holidays (now) to unlock, root, etc.
However, I do not have access to vpns that are router based - only computer based. I can't seem to share these connections to get the Nexus to register and check a connection - phone times out rather than taking suggested 2 minutes. I can't seem to skip the process either. I CAn't get back to work at the moment so I am left with 'Couldn't connect to the Internet' message and of course LTE won't work either as it's behind the great firewall.
How to gain access to my phone?
View 1 Replies
View Related
Jan 21, 2010
So I'm having a few problems with my iPhone. About 30 hours ago, I dropped my phone into a full sink. It was immersed for probably one or two seconds. I made the mistake of trying to turn it on right away, and it started spazzing - i.e. the startup apple icon screen would come on repeatedly and for a while the screen was flickering.
I looked online and followed people's advice of turning it off, letting the battery die, and leaving it in a cool place to dry. Since this morning the phone has been in a bag of rice drying off. I tried plugging it in tonight (impatiently) and to my delight the phone revived itself after charging for about half an hour. I synced it with my iTunes and sent one or two texts with no problems. But almost immediately my signal went down to no bars and I lost 3G connection.
Since then, it was displaying "Searching..." at the top of the screen, and got bursts of connection enough to receive two texts. Literally I would turn my phone on and all the bars would be there, along with 3G, then within a few seconds no bars again. For the last while it's just said "No Service."
I tried resetting the network settings to no avail, took the sim card out and cleaned it lightly with an eraser, nothing. When I go to "Carrier" under settings, it "searches" for, then finds (after a few minutes), my wireless network, but as soon as I leave the page my connection disappears again.
My question is- does anyone know if water damage can cause this particular kind of problem? Even though my phone is working perfectly otherwise (besides a somewhat mottled, water-spotted screen), is it possible that something within the phone was damaged that will not allow me to get a connection? Or could it be the sim card that is damaged?
View 4 Replies
View Related
Jun 1, 2011
I just bought a Charm with Motoblur, and the phone works great. The only problem is that I can't use my calendar because it requires me to sync to gmail (or whatever) to use it, to sync a calendar from the internet or something. However, I do not have wifi connection on my phone, and do not wish to get it. I just want to use my calendar without having to connect to the internet in any way. Is there some way around this synchronization? Is there something I can download and move to my phone so I don't have to sync with anything via wifi?
View 1 Replies
View Related
Jun 11, 2011
I was just curious to know if this is considered a known bug / will be fixed in the gingerbread update.After using wifi and walking out of the wifi zone (eg, out of my house and down the street) I will check my phone to find that the mobile data connection has not re-started itself, and only a reboot will fix this issue. Other issues have been my phone will get stuck only being able to upload (and not download the resulting pages/data) as well as the symbol disappearing completelyafter a little bit of research I found this may be a problem with 2.2.2 froyo and for my sake I hope it is, but I was just curious to make sure it is fixed in future updates.
View 3 Replies
View Related
Jul 4, 2011
Will the USB port supply 5V to a connected accessory? I'm thinking of running a MIfi 3.5G mini-router off it in the car.No data connection through USB (that will be wifi) just power.
View 4 Replies
View Related
Jan 1, 2012
I am having issues streaming music over 3G and 4G netowrks.It works great over a WIFI connection just not over the 3 and 4g netowrks.My laptop is a Macbook pro.
View 2 Replies
View Related
Feb 8, 2012
I have a droid3 and every time I try to download anything it now ask me to do it over a wifi connection, this started 2 days ago. How do I make it start using the phone to download, and it doesn't matter the size of file.
View 1 Replies
View Related
Sep 24, 2011
My wifi connection is working fine, but internet connnection is not, want to sort it out soon
View 3 Replies
View Related
Dec 28, 2011
Have an Atrix 2, ive had this phone for about 3 months now and since last month ive been having with the wifi turning off by itself, or shows being connected and its not. Now at first i tought it was my router, so i got another one and still the same thing. it does this not just at home but to any wifi network. im pretty sure this is a hardware related problem, however it could be software also, i have gotin noware execpet from Moto Send your phone in, so in about 2 to 3 weeks ill have it back with no way of having a phone, plus ill still have to pay at&t, second at&t have never hered of the atrix 2 having wifi problems and offered to exchange the device for my warrenty deductable of $150.00, what should i do, i would also like to here from the community to see if there are anyone else with the same problems se we can address these to Motorola and At&T.
View 7 Replies
View Related
Mar 31, 2012
Traveling with the Xoom wi-fi and it suddenly decided not to connect with open wi-fi networks. Works fine on home network and worked fine on open networks a couple of weeks ago. Now, it sees the network, saves the network but when you tap "OK" to connect nothing happens.
View 8 Replies
View Related
Oct 23, 2011
My XOOM returned from 4G upgrade refusing to search for WiFi once it has been allowed to connect 4G. I have experimented with many ways to improve this including changing from CDMA/LTE to CDMA only (just to test 3G connections), disabling the 'data enabled' setting, disabling WiFi too, then turning on WiFi both before and after blanking the screen, and trying all 3 options of when to change from 4G to WiFi (after screen blank, etc.). The only fix is a complete shutdown and cold boot for it to wake up and search for WiFi. The WiFi in question are the same I used before the 4G upgrade and nothing has changed but the XOOM hardware and presumably software. If it is restricted to WiFi only and I move from home to office to a public WiFi, it will happily switch back and forth UNTIL I coax it into a 4G connection. Then, it takes a cold reboot.
View 6 Replies
View Related
May 29, 2012
I have the Xoom 2 WiFi 3g 32GB and it constantly drops my home network wifi connection.
It scans, sees the SSID, connects, authenticates the encryption, then drops the connection, only to scan and reconnect again in a constant cycle.Wireless router is a Netcomm NP800n on latest firmware. Tried both WPA and WPA2, tried the Xoom with a static IP and tried rebooting both devices.Xoom is on Honeycomb 3.2.2, system version 0.268.4.MZ616.AsiaRetail.en.03 and wifi disconnect policy is set to never.
View 1 Replies
View Related
Dec 1, 2011
I've recently had issues with my Xoom where it often loses touch connection. When I touch and drag it suddenly acts as if I lifted my finger when I did not. It's almost like something is interrupting the touch. I've tried uninstalling everything, doing a restore, stopping services, restarting the tablet, but none of it has worked.This does not happen all the time, but happens often, most often when I first turn the tablet on or when I've been using it a long time. Imagine playing Angry Birds and having the bird fling itself when you've just started pulling back the sling shot. It's quite frustrating. Kidding aside it affects other applications as well. For example I can no longer draw dependably since my lines end up cutting off at unexpected moments.
My screen also has some kind of strange oily stuff under it when I press it. I thought these issues were due to my screen protector so I took it off, but the issues continue. It's been getting worse to the point where sometimes it does not go away for a while. Eventually the oily stuff disappears but when I touch the screen it comes back.
View 2 Replies
View Related
Sep 27, 2012
Is there a way to keep WiFi Connected all the time? Mine turns white when the screen goes to sleep and takes some time to turn back blue. i have checked the advanced settings, and it is set to Always keep WiFi on during sleep. When it is white, I don't get email, Gmail Chat, etc. As soon as it turns blue, I receive email, and Chat messages.
View 15 Replies
View Related
Sep 20, 2011
I barely get a signal standing in front of the router! I dont even use it anymore. The phone also drops both 3g and 4g for no apperent reason.
View 8 Replies
View Related
Nov 6, 2012
I have a US WiFi only Xoom with a weird network issue. Whenever I leave it at home when I go to work, I come back to a gray wifi indicator. I'm still connected to my router and can access things internal to my network (like my Sonos system or router), but can't get to anything external (such as pinging an IP address or doing a DNS lookup).
View 1 Replies
View Related
Mar 19, 2012
I have a Bionic. The device works very well with apps, but seems to have difficulty with some WIFI points and keeping connected to the 4G or 3G networks. I am in the New Haven, CT area near I95 and I have friends with an HTC Thunderbolt that can easily get the 4G consistently. This is my second Bionic, the first one stopped functioning even after factory reset. Most Single AP WIFI will connect, if not airplane mode toggle is a workaround and will allow it to see the AP and connect. Any enterprise network with multiple APs with same SSID will give me a connection problem about half the time. Once it starts the Connecting, Disconnected, Scanning loop, I must airplane toggle. This does not always correct the issue.
View 12 Replies
View Related
Feb 14, 2012
I have a Motorola RAZR international GSM version (XT910). It is an unlocked phone without any contract or carrier branding.
I seem to have issues whenever i try using my phone as a WiFi Hotspot. When the Hotspot is turned on the data connection drops. I have tried this while using the device as a hotspot for my iPad and/or my laptop. I'm able to browse normally when i'm directly browsing on the phone. But the moment i begin to use the phone as a WiFi Hotspot i see the data connection immediately getting terminated. Even the data toggle widget i have on my home screen gets toggled off automatically. It comes back up once the device i tether from stops trying to access the hotspot.
This is not a carrier limitation. I tried using the same SIM Card on 2 other unlocked phones (Xperia X10i and Galaxy S2) and they both tether just fine. I also contacted my carrier and had the network and APN settings reset while using the RAZR. That didn't seem to solve the issue either. I have tried every solution that i know of. I have even reset the phone to factory settings a couple of times. But nothing seems to work. There are no Smart Actions setup that conflict with the data connection. I'm totally clueless about what is causing this issue.
It is really frustrating to know that i am able to tether even on a two year old Sony Ericsson Xperia X10i that's running Android 2.3.3 but not on the brand new RAZR for which i had to pay around $700.
More details about the phone and software version i'm running on are-
System Version- 65.1.21.XT910.AsiaRetail.en.03
Model Number- XT 910
Android Version- 2.3.5
Baseband Version- U_03.1C.85P
Kernel Version- 2.6.35.7-gf61d3a8
a24124@zin22lnxdroid14#1
Build Number- 6.5.1_73-SPD-IRD-21
View 2 Replies
View Related
Jun 8, 2010
Has anyone else noticed the problems with the headset connection? Mine was fine but now if I don't juggle it at the phone end, it sounds like a tape recorder when the tape used to get dragged in. Is this a phone fault? Is it a problem with the connection on the phone's motherboard equivalent?
View 4 Replies
View Related
Mar 8, 2012
I am wondering if when I start an app if that can be a trigger in SA. For instance, when I use My Tracks I would like SA to shut off the wifi.
View 2 Replies
View Related
Jan 11, 2016
I factory reseted my phone recently and I cant seem to get my alarms to trigger, i do NOT use the phone default alarm software, (mainly because I do not want the alarm sign icon at the top of the screen reminding me what I already know), so I use another software, I currently have 3 other alarm software's (Tasker, Alarm Clock Plus, Alarm Clock Xtreme) and while they do trigger when I test the alarm just a couple mins from now, the problem is at the morning, I assume its because my phone goes into deep sleep? here is my CPU spy screenshot which confirms my phone going into that mode, are alarms not supposed to trigger there?
View 10 Replies
View Related
Sep 28, 2011
Last night when I turned on my wifi at home, the wifi and phone signal bars appeared but were gray and I had no internet/data connection. I checked the wifi settings which indicated I was connected with good to excellent signal. Toggled the Wifi on and off several times, and turned phone on and off, which did not work. Went into wifi settings and told it to forget settings and reconnected, same result. When I turn off wifi, 3G appears and data connection is restored. Left the phone on in the media dock all night, and this morning when I turned on wifi, all was fine. What does gray signal bar mean?
View 1 Replies
View Related
