Motorola :: No USB Car Charger With Aux Audio Output?
Jul 3, 2010Hasn't anyone created one of these yet?I can't ditch the iPhone and AT&T's bullsh|t network till somebody does.
View 1 RepliesHasn't anyone created one of these yet?I can't ditch the iPhone and AT&T's bullsh|t network till somebody does.
View 1 RepliesIs there any information on the max current draw for charging the Droid Razr? Both wall chargers I have output 750ma but I believe my car charger only puts out 700ma. Will charging the phone on a charger with too low current output damage the phone? Will it damage the charger? Or is the phone smart enough to throttle the current usage to what's available? I'm assuming the latter is the case since I can't find any warning on charging current. Will a higher output charger (say 1A or 2A) charge the phone faster? Will it affect the longevity of the battery (slow vs fast charge)?
View 2 Replies View RelatedI just got my Atrix 2 yesterday in hopes of it replacing my iPod touch as a music and phone device.I loaded up my stuff and went to my car to test it out (obviously through the headphone jack) and I was dramatically disappointed. I went straight to Amazon to look at the price of the latest iPod model! Sounds like a muffled tape deck.There are just plain out frequencies that are muffled or missing on the Atrix 2. Does not take a good ear to hear it either. I wish I could sit down with every person who looks at this or a Motorola engineer to show them.
View 7 Replies View RelatedWondering if there is a way to get digital audio output through the USB ports for use with an external DAC. I'm wanting to use the Atrix via HD Dock as a good source component for my home stereo. If anyone has set something up along those lines, or using another solution, i'd like to hear about it.
View 1 Replies View RelatedI've noticed that the volume does not change at all when output is the car dock. E.g. lowering the volume does not actually decrease the volume until you get down to muting the device (which does still work). There are no problems when listening through the headphone out, but I don't wish to negate the functionality of the rather expensive Motorola Cardock.This is a major inconvenience as it generally causes an ugly distortion and could damage my car speakers.
View 6 Replies View RelatedIs there any way to continue audio output from a browser tab once no longer in foreground, or after task switching, such as with the music app?I have the wifi Xoom. The Sirius XM online android app can be sideloaded, but won't successfully run, requiring use ot the browser-based player.The interface is awful, but functions. The browser changes audio source to the current foreground tab, or stops audio after task switching.Would like to be able to run it in the background until SXM releases a tablet-compatible app.
View 3 Replies View RelatedI have the motorola car dock for the Droid Razr which came with the Charger that plugs into the cigarette lighter and the 3.5m Aux cable. When i have the charger plugged in with the AUX cable i get interference when playing music from my phone, if i remove the charger and just have the aux cable plugged in via the dock i get no interference.
View 3 Replies View RelatedI'm wondering what is the charging power output going through the CA-134 cable from the carkit? If the CA-146 adapter was attached, is there a difference then in the output?
View 1 Replies View RelatedIn the user guide for the Droid RAZR dock (part # 89525N ), there is a split audio/charger usb cable. This cable also shows in several catalog photos for the car dock.I purchased the car dock from a Verizon (official) store, but only got a straight audio cable. what the part number for this cable is, and (b) where can I order it?
View 9 Replies View RelatedI purchased nokia 5235 two weeks back. The ringtone volume is very very low and most of the time I missed the calls due to it. Also audio output of songs is very low. Is this the problem with all nokia 5235 or probably with my handset. Kindly suggest the solution.
View 14 Replies View RelatedI need to select the headset earpiece every time I want to make or answer a call?
Â
There does not appear to be a default setting for this anywhere on the phone.
I can't connect anything via the headset jack so I cannot play music except though the phone's speakers....
View 8 Replies View RelatedI have Nokia C5-00 mobile bought 5 months back. My phone's audio input and audio output are really bad. I have the latest software update i.e. 062.001. And recently I have given for service in a Nokia service station. But the problem is still the same. So how could I improve the audio of my phone. Or else is it the problem with Nokia C5-00.
View 7 Replies View RelatedIs it possible to force the audio output to be played through the speakers of the Xperia Ray, even when headphones are plugged in ? I know it is possible to do that when you listen to FM radio, but can you also do it when you listen to something else ? (... and particularly when you listen to your own music ?)
View 9 Replies View RelatedMy 6303 has recently developed the problem that sometimes when calling or receiving a call, I cannot hear the caller although they can hear me. I also have the problem that when I connect my phone to a PC via USB cable, the PC crashes (serious error) which I will post separately.
View 9 Replies View RelatedI got Nokia 500, and for some reason the audio output(Jack 3,5mm) doesn't work Any things i plugged in doesn't give results.I can hear the voice when i unplug headphones, like it should be.
View 7 Replies View RelatedAfter upgrading to 5.1.1 - my handsfree kit connects with iPhone still fine, but it has become impossible to hear any calls through it?! Whereas, I used to have an option to "choose audio output" (iPhone, speaker, or handsfree device), there is now only the standard built-in speaker option - as though no Bluetooth were connected. The handsfree device (Blueant S4) is connected and contacts synced, and still allows me to make calls - and yet, the audio of the phone calls can only be from the iPhone itself.
View 1 Replies View RelatedWhy my iPhone behaves in a way like it was switched into a docking station?
When I play a music (using iPhone speakers), the iPhone automatically switches from 'iPhone" into "docking station" after several seconds of playing a music.
I've already been resetting iPhone, cleaning the docking station port off - it's ok from the hardware point of view. Â
Info:
iPhone 4S, iOS 7.1.1
I love using Pandora while I'm in the car, but it's a battery drain. I use a normal 3.5mm plug for the audio, and all is good. But when I try to charge my Tour at the same time as using it for audio, I get a terrible screech over the music.
View 4 Replies View Relatedwhat is the sound output capability of nokia e63's 3.5 audio jack?
View 1 Replies View Related I recently bought a new VW GTI. I'm a software engineer and I'm very well versed in my iPhone and it's operation. My car maintains 2 external connections with my phone. My hands free phone requires the use of bluetooth. For my stereo, I perfer the MDI to dock connector for the audio quality. Here is the following problem I experience.
I turn on my stero to the MDI input interface Listen to music, and use Waze to navigate Receive a phone call, which initiates the bluetooth audio out End the phone call
Audio out is now set to bluetooth. It does not return to the MDI output interface, as a result my stero doesn't work.
I've gone digging through all my settings, but I can't find anything relevant to what I want. Basically I want to set my audio device output preference order. My device order would be the following.
MDI Interface
VW Bluetooth
Headphones/Speakers
Is it possible to to this or something similar with my iPhone?
Info:
iPhone 4S, iOS 5.1
When my Lumia is connected to the car via bluetooth, its connected with both audio profiles, Voice (Phone Call Audio) and Music (A2DP).So when connected and Nokia Drive is running the audio is sent to A2DP to then be sent to the aux input of the car stereo. This is all well and good if you have the radio on and AUX selected. But if you are listening to FM radio or a CD etc you don't hear any voice guidance from Nokia Maps.
This is a question directed at Nokia Maps Developers. Can a setting be created that allows you to select audio output via bluetooth? If you could select it to go via the Voice/Phone call Profile, like for instance the Speech input works on Windows Phone, for reading/replying to text messages, then when ever there is a direction to be spoken, the car bluetooth would treat it as a phone call, cut sound to the radio and speak the direction through the speakers no matter what the radio was outputting.If the above doesn't make sense then please ask me as this would be a worth while setting to be developed.
I've had two Razr's behave the same, whenever audio plays, especially using the headphone jack and external speakers, one can hear an audiable click or pop just before and after the audio plays. This happens with Pandora, Rhapsody, and Google Navigator. I haven't tested other audio based apps yet.Verizon and Motorola say they've not heard of this issue, so I'm wondering how many other Razr owners have noticed this pop? Hearing such noises as the audio turns on and off is not acceptable quality for a Motorola branded phone.I don't know enough about how the Android OS works, but I'm thinking there are two possible causes. First, as different apps access the audio hardware the internal electronics of the phone produce an audible pop as the circuits power up and down. Alternatively, the Android OS may be probing the headpone jack trying to determine if it's connected to external speakers. I've noticed that the pop gets louder as the phone approaches 100% charge.
With a 90% charge or better I've even had the audio output go quiet if the headset cable is moved, even though the audio application shows audio is playing. I know that removing the headset cable will pause the player, but in this case hitting play starts the player and it shows progress, but no audio is heard.
I've been using my Moto Droid, running Android 2.2.2 for some time now. Up until recently, I've been able to use it to listen to Pandora and mp3s loaded onto the phone. Now, any time I plug a set of headphones into the audio jack, the audio is really distorted. It sounds like a channel is out or something, and this happens across all volume levels. It pretty much sounds like you're listening to music underwater. Doesn't matter if it's streaming adio through Pandora or mp3 audio. When I unplug the headset (any headset, mind you) and go to external speaker, the audio is fine.
View 4 Replies View RelatedI'm using Atrix2 and my TV only have 1080i, is there any way to set the HDMI output to 1080i in my phone?
View 2 Replies View RelatedI'm only getting 720p from my HDMI output. Is this correct or should I be getting 1080p?
View 1 Replies View RelatedHi, my TV only support 1080i, it there any way to set the HDMI output to 1080i in Atrix2?
View 1 Replies View RelatedWhen I connect my Xoom to any port on my Samsung LCD, it syncs at 1280 x 720 only. There are no settings for the HDMI ports on the TV, they are all auto sensing. I am using a 9` HDMI cable. The picture looks fine, although I'm sure it could look better.
View 15 Replies View RelatedHave an Atrix 4G by At&T. I plug my HDMI cable into the TV (in an attempt to show video, pics, anything) and I get a Motorola logo flashing around only. The Entertainment Center shows up on the phone. If I press anything on the Entertainment Center it disappears, my TV goes blank for a few seconds, then the Motorola logo comes back. I can get the Entertainment Center back thru the pull down, but any selection, it starts all over again.
View 3 Replies View RelatedI am interested in using the miniHDMI to HDMI cable with an HDMI to DVI adapter to drive a standard computer monitor with the Xoom.
I have the pieces, and have verified I can do straight HDMI to a monitor that supports it. When I try to run the signal to DVI on a different monitor, I get nothing.
I'm having problems playing my .mp4 files on my TV using the HDMI output option. The mirroring keeps blacking out and coming back in. It's almost not woth watching a movie because of it. Why this would be happening? Is it an issue with the OS? i need this to work or I will be buying an iPad2.........which I don't want to do!!
View 1 Replies View Related