I broke my data settings (Motorola Razr Maxx Ve) and switched things over to QNC for now so I could at least do MMS (slowly).The thing is; It only works sometimes unless I have it plugged into my PC, and then it always works. What's the difference when having it plugged it? Does having the phone plugged into the computer enable the QNC because it's in modem mode or something like that?
My iPhone 4s won't connect to my car head unit it comes up connected and then half way thought it comes up as not connected and when I try to connect again it come up as device is out of range even when the phone is right next to it?
I currently have a curve 9300, and my service provider is Telus Mobility. I am connected to wifi and up till about 3 days ago everything was working fine, now it shows I am connected, but I can only get on internet for about 5 mins, I have to shut off all my connections then reconnect them for it to work again.
Having problems with my Xperia Ray connecting to my Jawbone. It shows it connected, and the jawbone even beeps when calls are ended. The problem is all of the phone audio is routed through the phone and not the Bluetooth.
My iPhone is on the Bell network, along with 3 other iPhones in my household. We have WiFi and the phone indicate that they are connected to the WiFi when we are in the house. However, my bill from Bell indicates several instances where the phones (all 4 at different times) are connected to the 3G network for 24+ hours at a time. Additionally, it shows the phone connected twice during that time period (as though there were 2 different sessions at exactly the same time, but with differing amount of data connected)
The explaination that Bell gives me is that there are 'minimized' applications still working on 3G even though the phone says it is on WiFi, and that each of these opens its own 'connection'My understanding of cell technology is that the phone can only access one method of Internet connectivity at a time, and that it can be explained as a 'pipe' or 'straw' carrying connectivity and all of the data. I have never heard of a phone that can access two different types at the same time, nor one that uses separate 'sessions' at the same time of either type of connectivity.
I would assume that I turn on my phone in the morning and I am in my house, it indicates WiFi, so I can browse the web, collect my email and update my Facebook on that 'session' that lasts 4 hours until I leave the house. Now my 3G kicks in and the email that I still have open now collects through the opened 3G session, as well as the page I left open downloading something.When I get to work and enter my WiFi area there, the session would then collect my email through WiFi again, and my download as well.
When I initially received my Droid 3, 2 weeks ago, I had no problem with either my PC or laptop recognizing the phone when connected via USB. I was given the options in the notification bar for USB Mass storage, charging only, etc. Went to transfer some files 2 days ago, hooked up the USB cord and neither computer would recognize the phone, tho the phone was charging off of the usb cable from the computer. I have reinstalled the drivers on both computers, tried it on my work computer and nothing. Could an APP inhibit my phone from connecting to the computer? I have uninstalled my Task Killer and some other Apps that I think could be inhibiting this. IS there a way to force the phone to turn on USB? I couldn't find anything in settings.
I'm a fresh owner of xoom tablet. I'm very happy with the product however, I seem to be unable make internet connection using my Vodaphone Australia mobile broadband SIM card. When the card is inserted and no Wi-Fi avaiable tha table seems to be connected to Vodafone 3G ( right bottom corner ) however I'm unable to browse internet nor can I do any other activities requiring internet access. The message I see says:
No Network connection
At this point I do not know whether there is something wrong with my xoom tablet setting or I shold take this issue with Vodafone Australia. I'm using same SIM card on my laptom and it all works.
After about an hour of being on my phone thinks that the HDMI cable is connected. I don't have a cable, or
If I turn the phone off, the notification goes away for a bit, but still comes back after about an hour. I did try "Factory Data reset" under the privacy settings, but that did not make a difference.
I am using the MotoActv with Mac OSx Lion, all devices updated to the most recent versions. All had been working perfectly until yesterday. Now, when I plug in via USB port to sync music and run data, MotocastUSB loads, but the message at the bottom of the screen says "Connect your Device" and all of the indicators say 0GB available. (see screen shot)When I press the Sync button, I get a Sync complete message with Media sync:failed. Fitness sync: successful.(see screen shot) When i then press the Sync History button, I get the message Music:writeCommandToDevice failed. No connection to device. Info for MotoAcrv indicates 10.26 GB of space available.all three screen shots combined into one jpg for simplicity.
My Xprt was able to connect to my Bluetooth (Q Ant 2) without any issue. Over the past two days it cannot connect. I have removed battery from the phone, Shutdown/rebooted, made it scan for devices, cried/screamed etc. and to no avail. I get an audio prompt from my headset that states ( "Unable to connect") On my Xprt in the Bluetooth section I get "connecting...." then it will sate "paired but unable to connect".
I can't get my Wi-Fi to work. I tried the router people (their "fixes" did not work), AT&T couldn't help, Motorola couldn't help and I even took my phone to Best Buy where I purchased it and their fix worked for a bit now I can't get it to work. There is a way to change the security settings and I can't get back there. Of course I found it by accident before and now I can't get back there. I am connected and can't use the browser. This is starting to tick me off!! I have had this phone 2 weeks and no solution to the problem. The thing is I can connect to my work WEP but not my home router.
My laptop doesn't recognise my DEFY via USB.More details: When I got the phone it worked but after a while not always. Sometimes it connected 5 minutes later but nowadays doesn't work at all.By power charger it is charging normally.When it's plugged to the computer, the phone's screen lights up, but doesn't connect or charge. If I tick on/off meanwhile the USB debug, the USB sign shows up but it's still not charging or connecting. (I've already tried all 4 options)Moreover when I remove the USB cable, the USB signal doesn't disappear until I restart the phone or abort the USB in the application manager.I've already tried to install or uninstall the driver (Moto Helper) but didn't help.The main problem is that if I connect the phone to the notebook, the device manager doesn't see it. (I tried different computers, Win XP and Win 7)I did a factory reset several times, I also tried changing usb cable... but nothing happened.
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
I drove here today and since arriving can't stay connected to 3 or 4G. Turned off 4G to try that still won't stay connected. Tried airplane mode, restart connections, power cycle and battery pull. Luckily I found wifi so at least I have that.
it won't connect to my laptop by Bluetooth. Both devices will find each other and get as far as putting in the code to make sure they are the right device, then my computer confirms the connection and my phone shows up in Bluetooth devices, but on my phone is shows paired but not connected and there is no option to connect, only to unpair.
If my Atrix 2 dies and I use to USB cable to connect it to my laptop, it will not charge or turn on. The notification light turns white and stays constant. If I plug it into the wall it charges so I know the phone is not broken. I have tried holding down the power button, power ad volume down, power and volume up, power and camera....If I plug it in while still alive and choose the USB function as "charge only" it will charge, but no other time. Does it always have to be "charge only"? I cannot charge and look at files at the same time?
I have a Droid 4 for my phone, my computer is a desktop running Windows 7 64 bit ultimate. I've tried to connect to MotoCast both wirelessly and with the USB cable. I Uninstalled it and redownloaded it. The part on my computer refuses to stay online, even when I am in MyMotoCast browsing through the files! I have all the settings allowed, it's on a clear port.I gave up and removed my SD card and manually loaded movies and music onto the card, and popped it back into the phone, it was much quicker than waiting on MotoCast's 10 seconds of connect time every time I reset it.
I also find that trying to rearrange a playlist gets buggy after a couple songs. Why is it designed to rewrite the whole 5(ish)kb that is the song to a new location rather than just relink to it? For every OTHER application, a playlist is a series of links that point to your songs. What it is NOT is a physical arrangement of those songs. Why is my phone's playlist a physical arrangement of those songs?
when you connect the X2 to your computer, that it looks like it has two drives? This might to relate to my question/post about how in Quick Office I see only two folder options (dcim and LOST.dir) that happen to be on one drive, and then everything else seems to be stored on the other drive. I know the X2 has two processors, but that does not mean it has two "drives".
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
I am no longer connected to vzw so i use my d1 exclusively on wifi at home. The trouble is when the screen goes to sleep wifi is disconnected. This means no notifications for email etc. Is there a way to remain connected to wifi 24/7?
Can i still send sms through wifi with no wireless phone provider?
I have ATRIX 2 india version. I want to use internet from PC connected wirh ATRIX 2. Presently GPRS enabled in my mobile. I am able to browse from mobile, the same I want to do from pc.
I ordered an extended life battery for my Defy, 3500mah battery that came with a new battery cover. after I installed it, I noticed that every time I connect the usb cable, the phone reboots! I tried connecting the phone first instead of having the charger pluged into the wall and still, it reboots every time! if I leave it connected and let it reboot, it will power up again and go on to charge. also the usb still works to connect with my pc, but again I have to wait till it reboots!
I have ATRIX 2 india version. I want to use internet from PC connected wirh ATRIX 2.Preaently GPRS enabled ib my mobile. I am able to browse from mobile,the same i want to do from pc.
I have connected the phone with Wifi, the system shows it is connected, the wifi bars show strength as very high. Yet unable to connect tointernet/email/facebook/apps shops etc through the wifi.I have checke dthe mac addresses - they are the same. no restictions from the router side. I am at a loss.
I cannot get my PC to recognize my Razr Maxx. I downloaded the drivers and still no good. I am using the cable that came with the phone. When connected it does charge my phone.
Just picked up my RAZR. Only issue so far is the WiFi. The phone will connect to my home network but any attempt to use the browser gives a connection error. Same issue with any application that requires a data connection. My laptop connects with no issue and my Droid X connects with no problem.