This morning I was prompted to download & install the new update OTA. I have attempted to do so 4-5 times now. Each time, it completes the download, reboots the phone to start the update, then when the update progress bar is about 1/2 of the way through, an icon with an exclamation point appears & then the update stops. The phone proceeds to boot up like normal. After it finishes booting up it displays a message stating that the update failed.I really would like to NOT have to do a factory reset to my phone just to get the update to install
I keep getting the OTA update on my Droid 4 and I let it download and then say install. It goes through the motions like it's installing but then GB loads back up and I see an error prompt that says the update failed. I am not rooted and I'm running an unmodified 2.3.6 GB that the Motorola Droid 4 comes with. Any ideas why it's failing? Also, after I get the fail prompt if I want to try it again I have to download the update file all over again which takes a long time even over my wifi internet connection, is there a way to store a copy of the update file on my sdcard so I don't have to keep downloading it?
When is it reasonable to expect the X2 to receive the update to Gingerbread not that the Droid X is receiving it in the field? As a consumer I would have expected the newest model of the Motorola family to have been shipped with Gingerbread but seing the old model Droid X receive it before the X2 is a little puzzling.
Noticed that vzw started pushing the Gingerbread update to D2's and I decided to un root and try it out for myself. I recived an update after I un rooted and reset to factory settings but nothing Gingerbread related even after searching manually through the update check in "about phone". I am stuck on 2.2
I'm using a non-rooted device. I pulled the OTA update for gingerbread and it downloaded successfully. When it restarts it loads up to the boot screen and begins installation. It gets about 1/4 of the way before I get an exclamation error and the phone restarts. I've tried it multiple times and even formatted my phone before trying it.
I got the Gingerbread update the end of last week and for the most part everything is great. Phone is much more responsive overall and the Motoblur updates seem good as well. I am having one new problem though. Three times now I've unplugged my phone from the charger in the morning and it has been locked up. The green notification light is flashing so it's not totally dead. No combination of keys will wake it up though. Have to pull the battery to reset it (which is a pain with the Body Glove case).
The release notes for Gingerbread make note of automatic dialing of conference call codes from the calendar entry:
Easy conference dialing allows you to dial the conference number and the meeting code will be automatically entered directly from your Calendar.
I have not be able to get this function to work, nor have I been able to find any references to it in the manuals or support sites. how the numbers have to be formated in the calendar entry?? Is the a 'special' field that they have to be entered?
I manually pulled the gingerbread update from Systems Updates on my Droid X (stock, no root). The update was successful and today was the first day I needed to record a video using the camcorder application. I noticed that my phone defaults to DVD video quality and does not have the option for HD anymore. My wife has the same phone and we updated hers at the same time and she DOES have the HD option for the camcorder.
I have rebooted the phone as well as pulled the battery and let it sit for awhile all with no luck. Both have all the same version numbers except for PRL version, which I believeis just for roaming.
I've noticed that since the Gingerbread update, occasionally (perhaps three or four times over the past week or two) a stock widget or two disappears from my home (or other) screen. This never happened with Froyo. This morning my stock Bluetooth widget was gone and I had to reinstall it. I am almost religious about pressing the Power button while on my home page to blank the screen before placing my phone in its holster. That has always prevented inadvertent button presses on the screen.
Before the gingerbread update, the LED worked great. It always blinked when I had a text message waiting for me, or anything else.After the gingerbread update, most of the time the LED won't blink if you lock the phone while still in the messaging app. It still works fine for everything else (Emails, calendar etc) but if you lock the phone before exiting out of the texting/messaging app, I would say %90 of the time the LED won't blink. If you exit the messaging app before you lock your phone, the LED works fine.
The LED worked great in froyo, sucks that's its kinda broken on gingerbread. Is this a known issue for Moto? Just adding in that I have already tried a factory reset and this did not resolve the issue.
After the gingerbread update I've noticed that my calendar is no longer updated with my corporate entries. The email still syncs correctly and believes I have my corporate sync account. However, in the Accounts list, the corporate sync account is missing. I attempted to set it up again and I get an error: "This account has already been added". The only thing I could think of is I had Touchdown installed prior to the update. Is there any way to purge the account without a factory reset?
found a terminal program and ran the dmesg command. I dont know much about android, but everytime this shows up in the dmesg output "qtouch_force_reset:forcing HW reset" it corrosponds to a time my phone randomly reboots.
handsfree bluetooth completely not working after the Gingerbread update? I have an 08 Titan with the built in bluetooth and everything worked perfectly on Froyo. Since the OTA update, I can pair and connect but can't actually hand the call off to bluetooth. I try selecting bluetooth on the in call screen and it seems like it tries but I get no audio at all and it just kicks back to normal phone call mode. Speaker works.
Anyone know when Gingerbread is released for the Droid X if it will support configuring a Proxy Server for WiFi? I noticed Motorola just recently provided an update for the Droid Pro to allow proxy settings. This sure would be helpful for those of us using the DX for business.
My wife and I both downloaded the new Gingerbread update today on our Droid Xs. Everything went smoothly, and love the interface, cut copy and paste features especially. The only problem I'm facing right now is in contacts we both had e-mailed groups set up. I have over 500 contacts with the business I have. I personally needed to have three groups in my contacts: one for personal, business, and business active.
What has happened after updating Gingerbread is all of our contact "groups" are now in what is called "My account groups". I cannot edit add or delete any member in these groups. Any trick to editing or deleting or adding to the groups in "My account groups"? The only workaround I have found is to create a new group and select each and every member in my contact list again which consists of going through almost 500 contacts and splitting them into three categories.
I'm working with an XP machine and am always getting an immediate "failed" download when trying to get .asf files from my machine. I'd hate to have to convert all of these files. They do show up on the Bionic's option for stream or download and to begin transfer but just fail. Is there a way to get this to work.
Don't do crimes, hack or otherwise color outside the lines.Piracy, device hacking, unauthorized unlocking and posting of illegal content is forbidden. This includes: the posting or recommendation of the use of "hidden menus" and commands not generally accessible through a phone's main menus; unauthorized redistribution of Motorola software; links to and excessive discussion of any non-standard software loads for locked devices; and any discussion, links or instruction for updating Motorola device software other than those sanctioned by Motorola or in the areas designated for that activity. We will remove links to hacking instructions and excessive discussion of hacking locked devices, as it is a practice we can't support and don't encourage. We judge what is excessive. Any discussions of non-Motorola software for unlocked devices must remain in the areas created for those discussions, and all other site rules apply in those areas. Please note that a device running a non-approved software
With froyo I used to plug my phone into the computer, then insert a jpg named albumart.jpg into each music albums folder, along side the songs from the album. This would be recognized by the stock music player. I'm trying to do this now and cannot get it to work.
after i installed gingerbread for my phone, the light sensor seems to be acting funny. it will light up the soft keys and my keyboard in low light conditions, but once it is pitch black the keys will not light up at all.
My car's bluetooth (2011 Honda Odyssey) was working perfectly with my Droid X (which had "FroYo" 2.2 software). Due to problems with my phone, Verizon had me update to the newest software (2.3, called "Gingerbread"). I now cannot pair the Droid with the car. I have called Verizon and Motorola both, who both stated that the most likely culprit was the car. Honda states that it is compatible with "Gingerbread" on newer phones, but not certain if it is on the original Droid, and Motorola has not sent a sample for Honda to test for the original Droid. What do I do? Is there a fix available here? Should I ask Verizon or Motorola to put the previous version, 2.2 or "FroYo" back on my phone?
When I had Froyo Microsoft Exchange syncing was spotty at best. Sometimes the emails would be instant sometime it would take 10-20 minutes for them to sync and it didn't seem to matter whether data push was enabled or not. On my old DX1 GB seemed to fix this issue but now on the DX2 with GB I haven't noticed any improvemnt. Does anyone else run exchange though DX2 and what is your experience, im running SBS 2003 and all other phones on our system ie. windows phones, blackberry and some other phones all seem to work great usually the e-mail shows up in the phone about 30 seconds before the outlook inbox.
Say I have a contact that is a family member and they are on Facebook. How would I link that info with other info such as their phone number so that their profile pic from facebook comes up when I receive a call from them or even a text from them? I had the pics like that show up on my last Droid 2 (before I lost it and received a refurb replacement).
I have been waiting for this update for some time now, and I am sure there are plenty of other people that have been. I personally love my droid 2, but I am something of a IT guru, and have worked out all the bugs for myself and my friends... took me 3 SBF's to do it as I broke a feature or 2 my phone a few times in the process until I fully grasped exactly what kind of structure that android runs on... You should really consider allowing the tech junkies to download it with a big warning that things are still in process of being fixed. I am sure that anyone that goes digging this far for the update will understand the risks, and be glad to help give debugging and q/a support to the team. Android is an open source based system, and as such the community that uses it is on the whole a tad more savvy than that of other systems. Just open up a thread where we can all come and check in with issues, and workarounds and sticky it so everyone can find it easily.
I've have my Droid2 for a year, and just got the GB update. I'll keep some browser windows open for a couple of days, just to keep state. With the update, I've noticed that the browser updates the window/tab _every_ time I leave the window. If I'm in a place with great 3G, no problem. But, I'm not always.Is there some setting to keep the browser from having to hit the website _every_ time? (I mean, it even looses the icon in the window listing).