Motorola Droid X :: Conference Dialing Update In 2.3.3 - Gingerbread
Jul 9, 2011
The release notes for Gingerbread make note of automatic dialing of conference call codes from the calendar entry:
Easy conference dialing allows you to dial the conference number and the meeting code will be automatically entered directly from your Calendar.
I have not be able to get this function to work, nor have I been able to find any references to it in the manuals or support sites. how the numbers have to be formated in the calendar entry?? Is the a 'special' field that they have to be entered?
When is it reasonable to expect the X2 to receive the update to Gingerbread not that the Droid X is receiving it in the field? As a consumer I would have expected the newest model of the Motorola family to have been shipped with Gingerbread but seing the old model Droid X receive it before the X2 is a little puzzling.
This morning I was prompted to download & install the new update OTA. I have attempted to do so 4-5 times now. Each time, it completes the download, reboots the phone to start the update, then when the update progress bar is about 1/2 of the way through, an icon with an exclamation point appears & then the update stops. The phone proceeds to boot up like normal. After it finishes booting up it displays a message stating that the update failed.I really would like to NOT have to do a factory reset to my phone just to get the update to install
Noticed that vzw started pushing the Gingerbread update to D2's and I decided to un root and try it out for myself. I recived an update after I un rooted and reset to factory settings but nothing Gingerbread related even after searching manually through the update check in "about phone". I am stuck on 2.2
I'm using a non-rooted device. I pulled the OTA update for gingerbread and it downloaded successfully. When it restarts it loads up to the boot screen and begins installation. It gets about 1/4 of the way before I get an exclamation error and the phone restarts. I've tried it multiple times and even formatted my phone before trying it.
I got the Gingerbread update the end of last week and for the most part everything is great. Phone is much more responsive overall and the Motoblur updates seem good as well. I am having one new problem though. Three times now I've unplugged my phone from the charger in the morning and it has been locked up. The green notification light is flashing so it's not totally dead. No combination of keys will wake it up though. Have to pull the battery to reset it (which is a pain with the Body Glove case).
I manually pulled the gingerbread update from Systems Updates on my Droid X (stock, no root). The update was successful and today was the first day I needed to record a video using the camcorder application. I noticed that my phone defaults to DVD video quality and does not have the option for HD anymore. My wife has the same phone and we updated hers at the same time and she DOES have the HD option for the camcorder.
I have rebooted the phone as well as pulled the battery and let it sit for awhile all with no luck. Both have all the same version numbers except for PRL version, which I believeis just for roaming.
I've noticed that since the Gingerbread update, occasionally (perhaps three or four times over the past week or two) a stock widget or two disappears from my home (or other) screen. This never happened with Froyo. This morning my stock Bluetooth widget was gone and I had to reinstall it. I am almost religious about pressing the Power button while on my home page to blank the screen before placing my phone in its holster. That has always prevented inadvertent button presses on the screen.
Before the gingerbread update, the LED worked great. It always blinked when I had a text message waiting for me, or anything else.After the gingerbread update, most of the time the LED won't blink if you lock the phone while still in the messaging app. It still works fine for everything else (Emails, calendar etc) but if you lock the phone before exiting out of the texting/messaging app, I would say %90 of the time the LED won't blink. If you exit the messaging app before you lock your phone, the LED works fine.
The LED worked great in froyo, sucks that's its kinda broken on gingerbread. Is this a known issue for Moto? Just adding in that I have already tried a factory reset and this did not resolve the issue.
After the gingerbread update I've noticed that my calendar is no longer updated with my corporate entries. The email still syncs correctly and believes I have my corporate sync account. However, in the Accounts list, the corporate sync account is missing. I attempted to set it up again and I get an error: "This account has already been added". The only thing I could think of is I had Touchdown installed prior to the update. Is there any way to purge the account without a factory reset?
found a terminal program and ran the dmesg command. I dont know much about android, but everytime this shows up in the dmesg output "qtouch_force_reset:forcing HW reset" it corrosponds to a time my phone randomly reboots.
handsfree bluetooth completely not working after the Gingerbread update? I have an 08 Titan with the built in bluetooth and everything worked perfectly on Froyo. Since the OTA update, I can pair and connect but can't actually hand the call off to bluetooth. I try selecting bluetooth on the in call screen and it seems like it tries but I get no audio at all and it just kicks back to normal phone call mode. Speaker works.
Anyone know when Gingerbread is released for the Droid X if it will support configuring a Proxy Server for WiFi? I noticed Motorola just recently provided an update for the Droid Pro to allow proxy settings. This sure would be helpful for those of us using the DX for business.
My wife and I both downloaded the new Gingerbread update today on our Droid Xs. Everything went smoothly, and love the interface, cut copy and paste features especially. The only problem I'm facing right now is in contacts we both had e-mailed groups set up. I have over 500 contacts with the business I have. I personally needed to have three groups in my contacts: one for personal, business, and business active.
What has happened after updating Gingerbread is all of our contact "groups" are now in what is called "My account groups". I cannot edit add or delete any member in these groups. Any trick to editing or deleting or adding to the groups in "My account groups"? The only workaround I have found is to create a new group and select each and every member in my contact list again which consists of going through almost 500 contacts and splitting them into three categories.
Was this feature removed from calendar events? I use it frequently and it doesn't always automatically pick up the number+meeting code from the appointment but is generally pretty good. So the last few call it wasn't working and I decided to try and add it manually but can't enter it. Is this a feature that isn't included in the Motorola software or was it removed from JB?
One thing I miss that my old Blackberry could do is to automatically dial both the conference bridge number and the passcode. In the location field on calendar appointments I could type the conference bridge number, then "x" and then the passcode. When I clicked the number, it would dial it, and then prompt me to enter the passcode. For example, if the number was 800-555-1212 Passcode 1234, I would enter it in the calendar as 8005551212x1234. It would dial the number, and then prompt me to click ok to enter the passcode number (1234). The RAZR will let you memorize one conference bridge, but that is all.
My company has one conference call number and everyone has their own passcode. I would like to create a contact with the main call number and add each persons passcode to their contact information as an "other" phone number. Is there a way to call the contact number then when prompted for the passcode, go to a the appropriate contact and have their "other" number sent to enter the conference call?
I would like to know if I can use voice commands to dial a call and then dial into an extension or conference number. I often take conference calls while I am driving and being able to get into the conference room without manually dialing would be great.
Don't do crimes, hack or otherwise color outside the lines.Piracy, device hacking, unauthorized unlocking and posting of illegal content is forbidden. This includes: the posting or recommendation of the use of "hidden menus" and commands not generally accessible through a phone's main menus; unauthorized redistribution of Motorola software; links to and excessive discussion of any non-standard software loads for locked devices; and any discussion, links or instruction for updating Motorola device software other than those sanctioned by Motorola or in the areas designated for that activity. We will remove links to hacking instructions and excessive discussion of hacking locked devices, as it is a practice we can't support and don't encourage. We judge what is excessive. Any discussions of non-Motorola software for unlocked devices must remain in the areas created for those discussions, and all other site rules apply in those areas. Please note that a device running a non-approved software
With froyo I used to plug my phone into the computer, then insert a jpg named albumart.jpg into each music albums folder, along side the songs from the album. This would be recognized by the stock music player. I'm trying to do this now and cannot get it to work.
I had put my comment in another post, but by the looks of it, it had never been addressed by any Motorola expert/employee, etc. Upon allowing my phone to sit, or after a reboot I can only make one phone call that is dialed at what I would call a rapide pace. It is what appears to be every call after that where I have a problem. In other words, I find the person in my contacts, select to dial it (or I input the phone number) and it just sits there. It can be anywhere from 30 seconds to a minute until ti finally dials.
after i installed gingerbread for my phone, the light sensor seems to be acting funny. it will light up the soft keys and my keyboard in low light conditions, but once it is pitch black the keys will not light up at all.
My car's bluetooth (2011 Honda Odyssey) was working perfectly with my Droid X (which had "FroYo" 2.2 software). Due to problems with my phone, Verizon had me update to the newest software (2.3, called "Gingerbread"). I now cannot pair the Droid with the car. I have called Verizon and Motorola both, who both stated that the most likely culprit was the car. Honda states that it is compatible with "Gingerbread" on newer phones, but not certain if it is on the original Droid, and Motorola has not sent a sample for Honda to test for the original Droid. What do I do? Is there a fix available here? Should I ask Verizon or Motorola to put the previous version, 2.2 or "FroYo" back on my phone?
When I had Froyo Microsoft Exchange syncing was spotty at best. Sometimes the emails would be instant sometime it would take 10-20 minutes for them to sync and it didn't seem to matter whether data push was enabled or not. On my old DX1 GB seemed to fix this issue but now on the DX2 with GB I haven't noticed any improvemnt. Does anyone else run exchange though DX2 and what is your experience, im running SBS 2003 and all other phones on our system ie. windows phones, blackberry and some other phones all seem to work great usually the e-mail shows up in the phone about 30 seconds before the outlook inbox.
Say I have a contact that is a family member and they are on Facebook. How would I link that info with other info such as their phone number so that their profile pic from facebook comes up when I receive a call from them or even a text from them? I had the pics like that show up on my last Droid 2 (before I lost it and received a refurb replacement).