Motorola Droid Razr :: Poor Signal Strength After ICS Update?
Jul 5, 2012
I updated my Razr Maxx on Monday. Tried doing it sooner, but was getting the bug where it wouldn't validate the update. Ever since my signal strenght has been much worse than before. I no longer get signal in some places that I go for work that I had no issues with before. In those I still get signal I have issues connecting to data where I never did before. Even at home my signal is much worse.I realize that ICS displays the strength differently, but the way it displays should have nothing to do with actual usability. Can hardly use my phone at all anymore while working whereas I had no issues before update.
View 15 Replies
ADVERTISEMENT
Nov 2, 2011
i'm having connectivity problems in a 3g area, and just wondering what the deal with this is. it's changing colors constantly.
View 15 Replies
View Related
Oct 1, 2011
While connected to my wireless for data, voice signal strength hovers at 1 bar. I can't find the signal strngth meter in settings to double check this as I write... when I am connected to 3g I typically see 3-4 bars...
View 3 Replies
View Related
Aug 2, 2012
I own a Droid Razr MAXX that I purchased in the June timeframe, so it is still essentially new. My phone was updated to ICS when Verizon pushed the update out to everyone a few weeks back. Initially, I was excited to be getting the update to help improve phone performance and functionality. Unfortunately, this has not been my experience.
Over the past few weeks, I have noticed that my phone signal strength has diminished. Since I work a desk job, I sit in pretty much the same exact location each day and it is easy to notice signal strength. Before ICS, I usually had a 4G connection with 3-4 bars. Now, my phone fluctuates between struggling to connect to 4G and eventually connecting to 3G with 1-2, maybe 3 bars. In fact, the signal icon frequently changes from blue bars to white (I'm not sure what it means, but it probably isn't good). The phone seems to run slower and my apps frequently crash a few times per day. In addition, my phone seems to be using more battery now too. Before ICS, I could work a full day and still have 70% battery remaining. Now, I'm lucky to have 40-50%.
I haven't added any new apps, but have a few more .MP3 songs saved to my SD card. In addition, I don't believe there are local issues with a cell tower going down, etc.
View 15 Replies
View Related
Nov 5, 2012
Its not really a problem but what is the blinking house icon above the signal strength on the droid razr maxx hd. It seems to flash randomly and I was just wondering what it was.
View 3 Replies
View Related
May 17, 2011
I have a problem with my signal when I enter my college building, the reception will fall so low that it will show "no service" and if I try to manually connect to my service provider, it says they are unavailable. my sim works fine, I've recently received a new sim, and my phone is updated to 2.1, awaiting the 2.3 update.
I've upgraded from a Samsung Jet and even that had perfect signal in lessons, never went below 2 bars, so why is the X10 so poor at signal strength? is there anything I can do to stop this? is the phone at fault here?
View 2 Replies
View Related
Apr 4, 2012
i have very poor signal with my brand new iphone 4s that i only got yesterday on a contract, improve my signal, as my iphine is normally in NO SERVICE! would i be able to send it back to apple or something?
Info:
iPhone 4S, iOS 5.1, no service
View 1 Replies
View Related
Dec 8, 2014
I'm using iPhone 5s (32GB) on a 4G network in Singapore.
Ever since I upgraded my firmware to iOS 8 and later, among other frustrations like battery drain, I'm also facing a significant drop/fluctuation in the network signal strength, home WiFi signal, and the Bluetooth range.Â
I'm unable to stream videos like I used to on Cellular Data. I used to get (when the phone ran on iOS 7.1.2) all 5 bars most of the time even inside the lift/elevator, but now it switches to un-browsable (don't know why) 3G mode even at the heart of the city.Â
I really wish I can go back to iOS 7.1.2Â
Info:
iPhone 5s, iOS 8.1.1
View 1 Replies
View Related
Feb 13, 2012
I have owned my Razr just over a week and been dismayed at it's inability to pick up a signal . In the building where I work it will not pick up a signal anywhere - not at my desk, in the kitchen, the stairwell .. nowhere.My previous phone, Nokia E63, never had less than 4 bars and oft 5 and picked up a signal anywhere in the building even , and appologies for TMI, when sat on the loo.So is this the norm with the Razr ? Is it not great at picking up signals and should I see if I can swao to a different phone - a colleagues Smasung Galaxy S 2 has no problems getting a signal, or might there be something wrong with the one I have in particular ?
View 3 Replies
View Related
Dec 28, 2011
In the last month or so I have noticed less bars of 4G when I am at my office.I know Verizon has been tinkering with their network.So what would be a good dBm signal strength within a fairly close proximity to one of their towers?
View 5 Replies
View Related
Jul 26, 2011
By changing the Singal strength indicator from stock android: When connected to Google services: Bright green for signal, grey for not to When connected to Google services:
Somewhat brighter blue for signal, Somehwat darker blue for no signal
it is impossible to tell if I have a zero bar signal or full bar signal (all in between are kind of visible)....
Ironically the indicator for not connected to Google services is very easy to read - but in most cases only lasts a few seconds...
Suggestion for the next patch: Turn up the level of blue for signal and go to grey for no signal to make the indicator visible.
View 10 Replies
View Related
Apr 30, 2011
I've seen this before but just got back from a trip to the UK and I noticed battery life was really bad compared to back in the US. Not sure if this is GSM vs CDMA or just I was in a weaker signal area so that the phone was "trying" harder. It's harder to tell because of another issue, the signal indicator!
This time, I made several perfectly fine calls with the indicator showing no bars, only when the phone showed "No Service" did things not work. I probably should have downloaded an app to show the signal strenght, but didn't....
View 6 Replies
View Related
Mar 16, 2015
I've noticed for the last couple of months anytime I check my "Network type and strength" in the About phone/status menu the 4G varies depending on where I am, but no matter what, the 1x always shows -120dBm.
View 10 Replies
View Related
Apr 22, 2015
Why can't I send a video? I've trimmed it it down to a couple mb and still won't go. I'm on Verizon with full strength signal. I've tried sending with gosms, text and, to no avail.
View 9 Replies
View Related
Sep 12, 2011
What is the difference between the white and blue signal strength bars?
View 4 Replies
View Related
Jan 31, 2012
I was wondering if anyone knows what algorithm is used for the signal bars on the Photon 4G. I have found that there seems to be no correlation between the signal strength (in dBm / asu) in Settings -> About phone -> Status and the signal bars that are shown. Often the signal bars will shoot from 1 to 5 or 6 even with really low signal ( ~97 to > 100 dBm) that doesn't fluctuate.
View 3 Replies
View Related
Jan 5, 2012
I'm having bad luck with wired headsets in my Droid Razr. I'm using a mic+ headset with the 3.5mm connector. I get poor voice quality.Bluetooth works well, though I like wired stereo headsets.
View 3 Replies
View Related
Nov 14, 2011
I was working after lunch and noticed that my phone was getting hotter and hotter. When I looked at the screen it showed constant data up and down. I wasnt syncing anything or surfing but it wouldnt stop. I shut down and restarted and even did the software "Battery Pull" but soon enough it would start data again and the battery would be eaten up. It was on 4G. Then finally it would stop an hour or so later. If I start the music app again it starts all over. Here is a thread on another site where we are trying to narrow it down. They think it may be the media server as it shows a lot of data usage!
View 15 Replies
View Related
Sep 30, 2010
Before the software update to 2.1 I could tell what kind of signal strength I had (i.e. 3G or G etc) now I have a H, but I don't have any idea of what it means.
View 1 Replies
View Related
Feb 3, 2012
Phone was sitting on my desk plugged in to power cord with 4G turned off.I have a very strong 3G signal at my office, I can see the tower out my window.The phone dropped the data connection and it took about 5 minutes for the 3G data connection to come back.I was getting used to this happening with 4G but now 3G too?
View 3 Replies
View Related
May 3, 2012
almost since day one, i have not really had the pleasure of enjoying what 4g signal is really like. i'm in chicago, and when ever i'm either downloading music or streaming video (netflix, Internet) or downloading anything that requires data, the phone completely loses the 4g connection and takes at times up to 5 minutes for the signal to come back. if i keep the phone on 3g only it does not happen, but that defeats the whole purpose of having a 4g device. the "data saver" in settings is off.
View 11 Replies
View Related
Jun 19, 2012
When I connect to my Home network using wifi, the signal is very weak unless I am within 5 feet of my router. I am using a valet router with up to date software. Other people in my house have other droid models and no problem with their signal strength. I have tried other routers and I get the same result so I know it isn't just my router.
View 9 Replies
View Related
Jan 4, 2013
I have a new Droid Razr and it cannot locate the wifi signal in the DOE laboratory that I work in. My 4 year old HP computer has no problem. Verizon 4G signal is fine as well as signal from Verizon based wifi hotspot. I know the signal exists, the phone simply cannot find it.
View 6 Replies
View Related
Oct 19, 2011
Does anyone have any recommendations to improve the reception (and thus prevent excessively frequent dropped calls) while using my Atrix 4G in a fringe reception area outside of San Diego?Some background info:I had an AT&T Nokia 6030 for almost five (5) years before upgrading my service to the Atrix.I live and work from the same location, which has not changed during those five years.I did not encounter the problems of dropping calls on the Nokia 6030. I routinely call the very same people at aproxmately the very same times and days of the week with the very same phone numbers from the very same locations in my home and shop... sitting in my office desk chair, standing at my shop workbench, seated at my kitchen table, lying on my bed... and as far as I can telI, nothing on my end or on the other person's end has changed... phone numbers, land or mobile, calling patterns... but ever since I upgraded to the Atrix, I've had this problem consistently from the very first day.
I contacted AT&T many times, and they sent a warranty replacement phone; same resulting performance.The signal strength meter on the phone typically reads 2-3 bars in this area, which AT&T says should be sufficient.)It is so touchy and position/orientation sensitive that I can often drop the call from simply turning my head, or if lying in bed at night, switching the phAT&T went through the entire customer service/tech support gamut with me:Power down recycle, remove & reinstall the battery, replace the original SIM card that came with the Nokia (which still works flawlessly under identical circumstances if I put the SIM card back into it!), run network diagnostics on the tower equipment... they even sent out a crew of field engineers to the property to assess the signal characteristics.
After months of evaluation by the engineering department, they finally determined that the San Diego area is very high in signal strength, and the problem is due to the immediate area where I am located... hills, valleys, canyons, etc. There was nothing more that they could do. That was simply the level of performance I had to accept from this phone in this location. (Sorry.)I still don't know why the primitive technology in that old Nokia doesn't miss a beat. I find it hard to accept that the flagship product with advanced technology can't perform anywhere near as well as this dated Nokia.But I like the Atrix so much in every other way, I would even pay for a stationary antenna and/or signal conditioning/amplification equipment at my location to be able to use it here.
I have not found any such equipment offered for sale by either Motorola or AT&T listed on their websites. I know that there are aftermarket companies that sell such items, but I would really like to know if anyone has any specific experience with those items, particularly when used with the Atrix, or at least any reason to advise in one way or another toward a solution.
View 6 Replies
View Related
May 20, 2011
Recently, I began to have this problem where the phone is showing full signal but the phone is actually not receiving any signal. So calls will not come in at all.
View 3 Replies
View Related
Jun 19, 2012
When I connect to my Home network using wifi, the signal is very weak unless I am within 5 feet of my router. I am using a valet router with up to date software.
View 4 Replies
View Related
Aug 8, 2012
What does a flashing blue triangle above the signal bars mean? I still have a blue 3g but no signal bars.
View 4 Replies
View Related
Aug 5, 2012
I only live 1 1/2 miles from an AT&T tower and the reception I get with my Iphone is horrible, dropped calls and the signal is 1 to 2 bars. I would like to hear from someone that is using an Atrix HD phone that is at least 1 1/2 miles from a tower and find what kind of reception you are getting before I spend $450.00 to purchase this phone and find that I am know better than with the Iphone.
View 14 Replies
View Related
Jun 23, 2011
Over the past two weeks I've tried three different Atrix phones and two different SIM cards, but I still have poor reception, especially indoors. The current signal strength readings are: -113 dB, ecno: -18, rat: 3g. At the AT&T store, which is right next to a cell tower, their demo Atrix has -52 dB signal, while mine varies between -62 dB and -88 dB. They tell me not to worry about the signal strength unless I'm dropping calls, but conversations are often unintelligible even though they're not dropped.
View 2 Replies
View Related
Jun 13, 2012
I use my D3 to listen to music. I have the mp3s stored on a memory card in my phone. I have music version v4.1.513. Before the update the music played fine. After the update the music will skip/click when ever my cell or data signal changes. I work in a very low / no cell signal lab so the phone is continuously losing signal and getting it back. This cause the music to skip/click every time. Not related to the update my phone still does not like to play music over bluetooth and do navigation at the same time. I have the phone linked to my car radio for navigation and I listen to music from the phone. It will reboot after about 15 minutes of use.
View 4 Replies
View Related
Mar 17, 2012
This is sort of an addendum to my discussion topic below - "Razr Reception in weak-signal areas." I've noticed that in a couple of places in the house and the far corners of our farm where the phone signal is sometimes spotty, I can always, ALWAYS get a good, solid, strong voice when I put it on speaker. If I turn speaker off and hold it up near my ear - even an inch or two away, I lose the connection instantly. Just a data point.
View 3 Replies
View Related
